Hello, Have you guys seen the new Solidworks slot and tab feature! Autodesk you must bring this feature to Inventor it would be a life saver! We have been loyal to Autodesk for years, but this one feature has us seriously considering a few seats of Solidworks. Check it out, and help push this to the top! https://youtu.be/eBbIE3i7jJw Thanks, Isaac Show More

New Bill of Materials for Inventor Industrial Revolution 4.0 -) Thank you for voting English version For Drawing Functions:   1. filter-settings-for-bill-of-materials https://forums.autodesk.com/t5/inventor-ideas/filter-settings-for-bill-of-materials/idi-p/6777047 2. allow-undo-in-bom http://forums.autodesk.com/t5/inventor-ideas/allow-undo-in-bom/idc-p/6535801#M14070 3. bill-of-materials-always-open http://forums.autodesk.com/t5/inventor-ideastation/bill-of-materials-always-open-assembly-mode/idi-p/3793424 4. inventor-renaming-tool-without-vault/ http://forums.autodesk.com/t5/inventor-ideastation/inventor-renaming-tool-without-vault/idi-p/3909724 - NEXT RENAMING https://forums.autodesk.com/t5/inventor-ideas/ilogic-design-copy-new-function/idi-p/7603482 5. create-drop-down-menu-part-fx-user-parameter-to-assembly-bill-of https://forums.autodesk.com/t5/inventor-ideas/create-drop-down-menu-part-fx-user-parameter-to-assembly-bill-of/idi-p/6768246 6. link-parts-list-to-excel-automatically https://forums.autodesk.com/t5/inventor-ideas/link-parts-list-to-excel-automatically/idc-p/6776965#M15829 7. frame-generator-change-definitions-the-item-in-a-bill-of https://forums.autodesk.com/t5/inventor-ideas/frame-generator-change-definitions-the-item-in-a-bill-of/idi-p/6777126 8. bill-of-materials-in-ipt-for-multibody https://forums.autodesk.com/t5/inventor-ideas/bill-of-materials-in-ipt-for-multibody/idi-p/7519167 9. more-keys-for-parts-list https://forums.autodesk.com/t5/inventor-ideas/more-keys-for-parts-list/idi-p/7690004 10. TOTAL WEIGHT - I choose items I want to put in weight or check All weight for all items 11. COMBINATION BILL OF MATERIALS - We have 300,000 to 500,000 active components (Total Occurences in Activ Document) for one or more, so the main assemblies are done in AutoCAD. Function: using the button = COMBINATION BILL OF MATERIALS= I label the reports in a folder, this information loads me to the BILL OF MATERIALS, I count all the same pieces and I can make BILL OF MATERIALS for the main assembly. This can then be printed and attached to the AutoCAD main assembly. If I change something in Inventor, I will always have my current BILL OF MATERIALS. 12. LIST OF DRAWING DOCUMENTATION - List all drawings from top to bottom. Layout of drawings 13. BUTTON Apply 14. summary-print https://forums.autodesk.com/t5/inventor-ideas/summary-print/idi-p/8357049 15. PRINT- I can select all items to print or just some. 16. ZOOM 17. The ability to create rows without having to use a virtual component. 18. When we create a drawing and save it, it will appear in (BILL OF MATERIALS / PARTS LIST) DRAWING FORMAT as described in the drawing that we already created a drawing 19. The status item is already created, just use it, we know in the drawing if the drawing is already approved. This item applies to the model, but the model and the drawing must agree, so when approved, this will apply to the model and the drawing at the same time. In spite of the selection, it should be possible to mark all items and to approve all at once. 20. qty-for-multi-body-pattern-bill-of-materials https://forums.autodesk.com/t5/inventor-ideas/qty-for-multi-body-pattern-bill-of-materials/idi-p/8270448 21. WEIGHT FOR VIEW REPRESENTATION, TO DRAW FILTR FOR LEVEL OF DETAILS - Currently, we get weight with levels of detail, but we are not able to get a detail level filter for the drawing. We are able to turn on the representation view filter for the drawing, but we do not get weight. If we copy the detail level to the view of the representation, then we will change something in the level of detail so the changes will not automatically be reflected in the view. We must delete the view of the representation, re-transfer the new level of detail to the view of the representation, and then turn the detail level again into the drawing. 22. I hope it will be in new BILL OF MATERIALS to implement the level of detail for parts https://forums.autodesk.com/t5/inventor-ideas/level-of-detail-for-parts/idi-p/3822718   Czech version   Pro výkres: Funkce:    1. FILTR PRO ROZPISKU https://forums.autodesk.com/t5/inventor-ideas/filter-settings-for-bill-of-materials/idi-p/6777047 2. FUNKCE ZPĚT A V PŘED PRO ROZPISKU http://forums.autodesk.com/t5/inventor-ideas/allow-undo-in-bom/idc-p/6535801#M14070 3. ROZPISKA VŽDY OTEVŘENÁ http://forums.autodesk.com/t5/inventor-ideastation/bill-of-materials-always-open-assembly-mode/idi-p/3793424 4. PŘEJMENOVÁNÍ SOUBORŮ BEZ VAULT http://forums.autodesk.com/t5/inventor-ideastation/inventor-renaming-tool-without-vault/idi-p/3909724 - DOPLNĚNÍ PŘEJMENOVÁNÍ https://forums.autodesk.com/t5/inventor-ideas/ilogic-design-copy-new-function/idi-p/7603482 5. VYTVOŘIT MENU SEZNAM PRO-fx-UŽIVATELSKÉ PARAMETRY V ROZPISCE https://forums.autodesk.com/t5/inventor-ideas/create-drop-down-menu-part-fx-user-parameter-to-assembly-bill-of/idi-p/6768246 6. link-ROZPISKA DO EXCELU AUTOMATICKY https://forums.autodesk.com/t5/inventor-ideas/link-parts-list-to-excel-automatically/idc-p/6776965#M15829 7. frame-generator-ZMĚNA DEFINICE PRO POLOŽKY V ROZPISCE https://forums.autodesk.com/t5/inventor-ideas/frame-generator-change-definitions-the-item-in-a-bill-of/idi-p/6777126 8. ROZPISKA PRO OBJEMOVÁ TĚLESA IPT https://forums.autodesk.com/t5/inventor-ideas/bill-of-materials-in-ipt-for-multibody/idi-p/7519167 9. VÍCE VARIANT PRO KUSOVNÍK https://forums.autodesk.com/t5/inventor-ideas/more-keys-for-parts-list/idi-p/7690004 10. CELKOVÁ HMOTNOST - Vyberu si položky, které chci dát do hmotnosti nebo zaškrtnu All hmotnost pro všechny položky. 11. KOMBINACE KUSOVNÍKŮ - Máme sestavy o 30000až50000 aktivních komponentách (Total Occurences in Activ Dokument) někdo i více proto se hlavní sestavy dělají v AutoCadu. Funkce: přes tlačítko =KOMBINACE KUSOVNÍKU= označím sestavy ve složce, tyto informace se mi načtou do kusovníku, spočítají se mi všechny stejné kusy a můžu dělat kusovník pro hlavní sestavu. Toto pak můžu vytisknout a přiložit k hlavní sestavě v AutoCadu. Pokud změním něco v Inventoru, vždy budu mít aktuální hlavní kusovník. 12. SEZNAM VÝKRESOVÉ DOKUMENTACE - Seznam všech výkresu shora dolů. Rozpad výkresů 13. TLAČÍTKO POUŽÍT 14. HROMADNÝ TISK https://forums.autodesk.com/t5/inventor-ideas/summary-print/idi-p/8357049 15. TISK-Můžu vybrat všechny položky k tisku nebo jen některé. 16. ZOOM 17. Možnost vytvářet řádky bez nutnosti použití virtuální komponenty 18. Když vytvoříme výkres a uložíme ho, objeví se v rozpisce/kusovník FORMÁT podle toho poznáme v rozpisce, že již jsme vytvářeli výkres 19. Položka stavu je již vtvořena, stačí jen použít, poznáme u výkresu, jestli je už výkres schválen. Tato položka platí sice pro model, ale model a výkres musí souhlasit, proto když dáme schváleno, bude to platit pro model i výkres současně. Přes výběr by mělo být možné označit všechny položky a všechny schválit najednou 20. SEČTENÍ A ROZPOZNÁNÍ OBJEMOVÝCH TĚLES V ROZPISCE PO PŘEVODU https://forums.autodesk.com/t5/inventor-ideas/qty-for-multi-body-pattern-bill-of-materials/idi-p/8270448 21. HMOTNOST PRO POHLEDOVOU REPREZENTACI, FILTR DO VÝKRESU PRO ÚROVEŇ DETAILU - V současnosti získáme hmotnost s úrovně detailu, ale nejsme schopni získat filtr úrovně detailu pro výkres. Jsme schopní zapnout filtr Pohledu reprezentace pro výkres, ale nedostaneme s pohledu hmotnost. Pokud zkopírujeme úroveň detailu do pohledu reprezentace, tak potom něco změníme v úrovni detailu, tak se nám změny nepromítnou automaticky do pohledu. Musíme daný pohled reprezentace smazat, znovu přenést novou úroveň detailu do pohledu reprezentace a pak zase zapnout úroveň detailu ve výkresu. 22.Doufám, že bude v novém kusovníku úroveň detailu pro ipt https://forums.autodesk.com/t5/inventor-ideas/level-of-detail-for-parts/idi-p/3822718 Show More

Feature Recognition for Sheet metal Ability to change the k-factor for the radius for a part from step format.  Video link https://www.youtube.com/watch?v=5PVpLB3UgzQ Show More

iParts After change Parametr Name is not update in Table. Please see video link and the pictures. If you like Idea, then vote. video link https://www.youtube.com/watch?v=RXz_ztbh6P4   Next Context Show More

When creating a 2D drawing of a parts using inventor, can marked lines come into the drawing as a different layer so they can be set as a different colour, This feature is there when you export a part but not when you are making a drawing of that part.   Left is how it currently works, right is how I'm suggesting it work.    Show More

Please Add to the Hole Feature tool, Slot, Hex and Square Holes.   Reason: The hole feature has a few benefits over other methods of creating shaped holes and would really increase the friendliness of the program for the users. It is often over looked b/c you can do most of the stuff hole feature can already do using sketches and using the shapes there... But Hole Feature is better b/c it uses allows the use of automatic Hole Tables. And it also can provide recommended hole clearances for various sizes fasteners. It's just much faster and simpler too. Currently we are using punches in sheet metal to help us remember what the hole clearances are. But Punches do not function the same way as holes. Not to mention if you don't include custom sizes in those punches and now you have to delete the feature. Where-as the hole tool you can just edit the feature and easily adjust as needed. Plus the constraints are easy too.   I think it also works better with iMates but I could be wrong.   Example of Holes     This suggestion kinda duplicates the Hole Feature request for Slots as seen in all these links. But this expands on their requests to other commonly used shapes.   https://forums.autodesk.com/t5/inventor-ideas/slot-feature-creation-in-modeling-mode/idi-p/4601899#comments https://forums.autodesk.com/t5/inventor-ideas/hole-to-slot-slot-to-hole/idi-p/8689133 https://forums.autodesk.com/t5/inventor-ideas/inventor-hole-table-to-pickup-slot-center-point/idc-p/11324061#M45950 https://forums.autodesk.com/t5/inventor-ideas/hole-feature-slot/idc-p/11324056#M45949 https://forums.autodesk.com/t5/inventor-ideas/constrain-to-the-center-of-a-slot-or-center-of-a-square/idi-p/8462914 As a benefit for all the ideas... This gives Autodesk Developers more reason to work on this b/c they can sit down and work on this chunk of work all at once. It does need attention as shown below... I'm sure there's others. https://forums.autodesk.com/t5/inventor-ideas/sheet-metal-fold-tool-flat-pattern-hole-table-needs-to-detect/idi-p/9185146 Show More

Folded models should be able to represent the finished product where as the flat pattern may not be derived directly from that.  A part that is created using the contour roll feature which then has holes punched in it more than likely requires the holes to be placed after being formed.  However the flat pattern will show the holes so the only way now to remove them is to fill them in with material.  I think an easy way to control this would be to put a check box in the cut dialog which essentially does not display that feature in the flat pattern. Show More

When creating a mirrored version of a sheet metal part in an assembly, the mirrored part doesn't inherit the the Sheet Metal Rule, thickness and unfold rule of the original part.   This is very annoying because without manually editing it, I'm unable to generate flat patterns. When I modify the thickness of the original part, I also have to edit the settings of the mirrored part again. Show More

Function procedure: https://www.youtube.com/watch?v=lewI1Jt7NEQ   You select a folder. The folder contains different formats. Summary Print recognizes the format automatically and sends it to the correct printer or plotter. Saves one day working with prints. When previewing prints in Inventor, you can also zoom in on drawing as in AutoCAD   English version Czech version Vybereš složku. Složka obsahuje různé formáty. Summary Print pozná automaticky formát a pošle na správnou tiskárnu nebo plotr.     Show More

Now, I think it is indispensable the Mudibody model in the sheet metal environment. And you, what do you think about this? Show More

Improvement is to have window select of multiple sketch profiles for sheet metal cut feature, just like it is available for extrusion, holes, and other features.   Show More

Sheet metal fold Missing preview. Creo has a preview. Show More

Tolerance for Extrude Please see the link and see the pictures https://www.youtube.com/watch?v=NcaFfc5B89o&feature=youtu.be   Show More

Bill of materials in ipt for multibody   https://www.solidsolutions.co.uk/blog/2016/01/creating-bom-tables-in-multi-body-part-documents/#.WgAIM4h76Uk Show More

Sheet Metal Twisted. Please see the picture and video link. If you like Idea, then vote. https://www.youtube.com/watch?v=rNdOIY8LzEY Show More

Please see the pictures and link. Ability to set Layer. If you like it, please vote. Layer for If https://youtu.be/t7zIzfTO8q8 Layer for Styles Editor Layer for Appearance https://modthemachine.typepad.com/my_weblog/2010/10/changing-drawing-curves-to-match-assembly-color.html Simple Coloring https://youtu.be/RnuUKtfebSI Show More