There should be an option to have two parts list of the same assembly but have different BOM Views. In one Parts List, I need to show the "Structured" BOM View. In a second Parts List, I need to show the "Parts Only" BOM View.     Show More

It would be nice to have the option of having multiple revision tables on one sheet. We may go through multiple customer revisions before we sent it to the shop so the first time the shop sees the drawing, they do not want to see "Rev 3". Show More

There should be a way to have two different parts list of the same assembly, but allow the cells to show different values. For example I want to have one part list that shows ITEM as 1 and 2. Then I want another part list that has ITEM as "-" for both. A     Show More

We need the capability to balloon an assembly on a drawing and set the balloon BOM view to "Structured" or "Parts Only". Then be able to place a parts list and have an option to keep that parts list linked to the balloons or disconnect them. If they are disconnected, this allows that parts list to be a "Structured" or a "Parts Only" BOM View. This also applies for any overwritten/static values. Similar point as idea #3 in this post from Feb 2019 https://forums.autodesk.com/t5/inventor-ideas/more-on-balloons-and-parts-lists/idi-p/8583547 I mainly want to create a ticket just for that one idea though.  Show More

Hatch rotation in Drawing should aligned to longest Edge of hatched area  The angle of the hatching should always refer to the main outline or the symmetry lines of the sections. (See the following example:) Examples of hatching orientation The following rules must be observed when hatching: The spacing of the hatching lines is adapted to the size of the component. If cutting surfaces of several parts meet, the hatching lines of the different cutting surfaces are drawn opposite each other at 45° or 135° and the spacing is drawn accordingly narrower or wider. A breakout that is not in the cutting plane can be recognized by hatching that is slightly offset from the cut. Show More

Usage of Break command also for Lines or Center Marks. This function could reduce space of Views and dimensioning       Show More

  Please add the ability to save or preset the user-defined custom colors in the Windows color dialogs in the drawing environment. Currently, custom colors are not retained after a restart of Inventor. The Edge Properties in particular are often modified with custom colors.       Show More

Instead of manually entering the scale, let me use scroll (or Ctrl+Scroll) to change the hatch scale value.   Same for angle and offset 😉     Show More

Please add a 3rd option so that the QTY is for only the visible holes of that size in that view:   Show More

If you suppress a drawing view that has ballooned items, all those balloons should not count towards the status of being ballooned: i.e., only unsuppressed views' ballons should count towards the ballooned status. The reason I'd like this is when I can't quite decide how I want to show a layout; so I move a view off the paper and suppress it. Show More

If the dimension setting for text orientation is set to "Inline" then if the text does not fit inside the extension lines the text is moved automatically outside, but is the text orientation is set to "Parallel" then the text will stay inside the extension lines.   Is there a way the text and move automatically outside the extension line for both if the text will not fit between.   Refer to this post for details.  Re: Move text to outside dimension lines if to large to fit between extension lines - Autodesk Community - Inventor   Donald Show More

in Assembly mode, we need to open parts before opening drawing... If we could select parts in model tree, right clic, open drawing it could be very appreciate! Show More

This is only visual but it would be nice if we could see the text when we are moving it around : Would it take too much ressources for nothing/too laggy? Thanks   Show More

There are still too many commands where it is not possible to assign a keyboard shortcut. Mainly for commands that can be accessed via the right mouse button.         Show More

Hi everyone, When I create an Inventor drawing, it generates objects based on solids. But when I export an idw to ACAD dwg all lines get exploded, and there's no way to select objects, only lines. Is it possible to export from IDW to DWG keeping objets like solids without becoming a sheet full of losed lines? Thanks in advance!! Show More

Problem: The scale of the hatching changes relative to the parent view and has to be changed manually (or with iLogic Rule) each time. According to the ISO and DSTU standards given in the textbooks, the hatching should be the same as in other images of this part.   When you build a section with a scale, the hatching is performed correctly (just like on the parent view). The main problem is that when we use scaling views, we should have the same approach to hatching. Now (including the latest version of IV2025.1), when building sections with scaling in/out, the hatching scale does not change (A-A), but when building a hatching element in Detail View (B), it does (see Fig. below).   This difference cannot be explained; the hatching scale in the enlarged views should be the same. The previous request at https://forums.autodesk.com/t5/inventor-ideas/auto-scaled-hatches/idi-p/5568621 was Archived with comment “… it is unclear what the request is …” Show More

Hello,   Maybe more people run in through this problem. But is is very annoying that when you place a Detail and then delete it, that it still continues the numbering of the details. For example; you place detail A, then delete it. Then when you place a detail, it will go up "+1" to B. Is there maybe a way to reset the detail counter? Or maybe have an array/list that you can see wich details have been used? The current version of changing the name of the detail, is pretty sensetive for errors. Show More

I think the replace reference tool is outdated and needs some improvements. Allow the user to choose whether the change applies to: The entire file (currently) The current sheet Selected sheets One view Selected views Show More

User wants a hole table optimization at short travel path. We know that this is basically a task of CAM software, but users would like to have the option of sorting the hole table according to different criteria. Currently, only sorting by description (hole type and diameter) is possible.   Show More