Trusted Storage FlexSim is licensed using FlexNet's Trusted Storage. Trusted Storage is a secure storage area FlexNet creates on your license server where it keeps encrypted and hashed license information for licensing FlexSim. Before you can activate a FlexSim license to your license server, its Trusted Storage must be configured. This is done by your license server authenticating with FlexSim's main license server. Below we'll cover configuring Trusted Storage on your license server. If you're here looking for instructions for standalone licensing, check out the article Standalone - Configure Trusted Storage. I haven't configured Trusted Storage before - why now? When your license server communicates over the Internet with FlexSim, this initial Trusted Storage configuration happens automatically and invisibly during the course of the license server's first license activation. The first time you activate a FlexSim license to your license server, your license server and FlexSim's main license server authenticate with each other, configuring your local Trusted Storage, and then immediately activating the requested license. In other words: Internet-connected activation = automatic and transparent Trusted Storage configuration. But you're here because your license server can't communicate over the Internet with FlexSim's main license server. Consequently, your Trusted Storage configuration must be completed manually before activating any license. Create a Trusted Storage config request On your license server, in your extracted download folder of FlexSim license server materials, navigate into the folder flexsimserveractutil. Right-click flexsimserveractutil.exe and select Run as administrator. In the FlexSim ServerActUtil program, go to Tools > Manual Activation > Generate Request. Enter a valid Activation ID. You can use our special activation ID configure-ts, but any valid activation ID can work. Enter 1 for the Count (seat quantity). Click Browse to select an Output File. Choose a filename for the saved request. We used configure-ts.xml. Press Save. Press Generate. You've just saved a new XML activation request in the location you selected. You can confirm this is a Trusted Storage config request by viewing the saved XML file in a text editor like Notepad. A configuration request will lack the TrustedHostInformation tag. If your configure.xml file contains that tag, that means your Trusted Storage is already configured. In that case, you can move on to the offline license activation steps for your license server. Otherwise, continue configuring your Trusted Storage below. Submit your Trusted Storage configuration request Transfer your Trusted Storage config request XML file from your chosen save location to a computer with Internet access. From your Internet-connected computer, open a web browser and login to any FlexSim Account - even a new guest account will work. Click the Licenses link in the header, then choose Manual XML in the Licenses submenu. Upload your XML request file by dragging it onto the drop zone. Your uploaded XML request will be processed. Upon completion, you will be prompted to download the XML response. Did you get a red error message instead of a green success indicator? A message "Fulfill count exceeded the available seat count" means that Trusted Storage is already configured on your license server. In that case, move on to the offline license activation steps for your license server. Otherwise, continue below to finish configuring your Trusted Storage. Process your manual activation responses Transfer your downloaded XML activation response to your offline license server. In the FlexSim ServerActUtil program, go to Tools > Manual Activation > Process Response. Browse to an XML activation response file. Press Process. FlexSim should give you an indication of successful processing of your config request. At this point your Trusted Storage should be fully configured. You are ready to activate your licenses. If you have any questions or problems, please search our Answers Community for possible solutions. There is a good chance someone else has already asked your question. Still not finding what you're looking for? Submit a new question and we'll check it out. If you're including any confidential information, such as license codes, be sure to mark your question as private! You can also contact your local FlexSim distributor for live phone, web, or email help.

Nesse vídeo, fazemos um overview sobre o FlexSim e demonstramos como modelar diretamente pelo 3D usando as conexões padrão disponíveis no software e as diferentes formas de inserir os objetos na área de modelagem (Grid). Também demonstramos como analisar de forma bem básica as estatísticas de cada um dos objetos e uma rápida introdução sobre o Dashboard e a variável estatística presente em cada um dos objetos individualmente. Para assistir o vídeo, acesse nosso canal do youtube.

This Kiva system demo model showcases some of the new AGV/AMR features that were added in FlexSim 2023, including new events and parameters to help with deadlock and allocation failure, and dynamic barrier management. You can update the layout through five parameters, and then click the “Build” button to re-build the system. FlexSim-2023-Kiva-System-Demo.fsm

A license server hosting FlexNet enabled products like FlexSim relies on a service called FlexNet Licensing Service 64. As of FlexSim version 25.2, FlexSim requires FlexNet Licensing Service 64 version 11.19.8.0 or higher.   Is FlexNet Licensing Service 64 already installed?   There is a chance that you already have a version of FlexNet Licensing Service 64 installed. Let’s check: Click the Start button or press the Windows key, then type “Services” into the search box in the Start menu, and press Enter. Windows will search for and open Windows Services Manager. If the list of services is not already sorted by name, click the Name column heading. Scroll down to services beginning with F. Do you see a FlexNet Licensing Service 64?   If you find that FlexNet Licensing Service 64 is not installed, or if you only have the 32-bit version (missing the ‘64’ in the service name), skip below to the heading Install the FlexNet Licensing Service.   Check the installed version of FlexNet Licensing Service 64   If FlexNet Licensing Service 64 is already installed, we should make sure it is version 11.19.8.0 or higher. If your FlexNet Licensing Service 64 has a lower version number, you will need to remove the older service and upgrade. We’ll get to those steps soon, but first, let’s check what version is installed:   In Windows Services Manager, scroll down to the entry for FlexNet Licensing Service 64. Double click the service name to open its Properties window. In the middle of the General tab, find the Path to executable. Copy the path location from just after the opening double quote (“) until the final backslash (\) before the filename. This is the path. It is probably something like C:\Program Files\Common Files\Macrovision Shared\FlexNet Publisher\. With the path now copied to your clipboard, note the name of the .exe. It is probably FNPLicensingService64.exe. Open a file explorer (Windows Key + E) and paste the path into the Address bar. Hit Enter to navigate to the path. Right click the .exe file that the service's Properties indicated is the service executable. Select Properties to view the .exe file’s properties. Navigate to the Properties window’s Details tab. The Product version should be version 11.19.8.0 or greater. Make sure that the Product name indicates 64-bit.   If you found that you don’t have FlexNet Licensing Service 64 installed, skip below to the heading Install the FlexNet Licensing Service.   If you found that your version number of FlexNet Licensing Service 64 is lower than 11.19.8.0, you will need to upgrade the service.   Upgrade FlexNet Licensing Service 64   To upgrade your FlexNet Licensing Service 64 to version 11.19.8.0, first complete the following: In Windows Services Manager, right click FlexNet Licensing Service 64 and choose Stop. Navigate to the Path to executable shown in the service’s properties. Rename the service’s .exe file by putting an underscore (_) in front of the .exe’s name. Continue with the instructions below under the heading Install FlexNet Licensing Service 64.   Install FlexNet Licensing Service 64   In your extracted download folder of FlexSim license server materials, navigate into the folder flexsimserveractutil. Right-click flexsimserveractutil.exe and select Run as administrator. Select the menu option Tools > Licensing Service > Install anchor service.   You should receive a confirmation that FlexNet Licensing Service 64 is now installed.     For further information on compatibility of various Flexnet licensing components, see Version Compatibility Between Components.  

Download the files Download FlexSim’s latest lmtools-related files here: https://flexs.im/lmtools-download You can browse archived versions of both lmtools and lmadmin here: https://flexs.im/licenseserver-archive Extract the download Once the download is complete, right-click the .zip archive and choose to Extract All… Save to a folder directly on your root drive. Your lmtools download folder Your extracted folder should end up looking something like this: In later instruction steps, any time we refer to the downloaded files, these are the files we're talking about. Note on location Technically you could save your download files in any folder, but we recommend right at the root drive level for convenience. If you choose to save your download folder in an alternate location, please make sure that the directory path doesn't include any folder named "FlexSim". Since Windows files are not case sensitive, this prohibition also applies to variations like "Flexsim" or "flexsim". We have seen instances where some versions of FlexNet licensing encounter errors when the name of the vendor daemon ("flexsim" in our case) is the same as a folder in the path. A folder that includes "FlexSim" as part of a larger name is fine. For example "FlexSim_Licensing" is a fine folder name. Examples of good paths: C:\FlexSim_LMTOOLS C:\licensing\vendors\FlexSim_LMTOOLS\ C:\Program Data\FlexSim_License\ Examples of bad paths (incompatible folder names bolded): C:\flexsim\ C:\licensing\vendors\Flexsim\ C:\Program Data\licensing\FlexSim\files\

tl;dr must be stable and persistent, always able to maintain a constant connection with the client software don't use a user's personal computer as a license server use a currently supported Microsoft OS bare-metal hardware, virtual hardware, cloud hosted - all are fine if the hardware meets the OS specifications, it meets the license server specifications configure your network and firewalls to allow the client-server communication Use an always-on, accessible server (not a user's PC) Your license server should be on a stable, persistent system that is always on and always accessible via a stable IP address or fully qualified domain name. A user’s personal system is not a good license server, unless they are only serving licenses to themselves, in which case please consider contacting your local FlexSim distributor to exchange for a standalone license. Operating System Hosting FlexSim licenses requires a currently supported version of Windows (desktop or server versions are supported). FlexSim and FlexNet do not support Windows operating systems that have reached their end-of-life. See Microsoft guidance on product lifecycle. You should perform all Microsoft Updates so that your operating system is fully patched prior to installing the license server software. In the future we hope to allow FlexSim licenses to be hosted on Linux or Mac license servers, in addition to Windows. Work toward multiplatform is ongoing. We do not currently have an estimated timeline. Server Hardware If your license server hardware meets the specifications required for the chosen Microsoft OS, it will be adequate to run the license server software. Hosting licenses is generally NOT a demanding workload. Please do not confuse these minimal license server hardware requirements with the different and more demanding system requirements for running FlexSim Simulation Software. Cloud Hosting Your license server could be hosted by a cloud provider or on premises, on a virtual machine, or a bare-metal OS. Keep in mind that your license server should be a stable, persistent server that client PCs can remain connected to. If your server setup works by creating and destroying new instances of a virtual machine each time you reboot, it is NOT suitable for use as a license server. You will lose your Trusted-Storage-based FlexSim licenses when the virtual machine is terminated. Networking, firewalls, connectivity For the client software to remain licensed, it must maintain a constant network connection to your license server. The exact details of such a configuration are up to you. If you want to limit client-server connections to the local network, allow access to the license server worldwide over a VPN, or make your licenses available over the public Internet, these are all decisions you must make and configure your network and firewalls accordingly such that your FlexSim client PCs can maintain a constant connection to the license server. Further networking guidance, including information regarding firewalls and port numbers, is found in the individual instructions for lmtools or lmadmin.

We have released a beta version of our bottling module. The module adds two new objects to the FlexSim 3D Library. The Mass Flow Conveyor (MFC) and the MFC Motor. The Mass Flow Conveyor allows you to define multiple lanes for flow items to move along. It is often used in bottling lines. Help files are included in the FlexSim User Manual to assist you. This beta version must be installed with FlexSim 2017 Update 2. 32-bit and 64-bit installers can be downloaded through the downloads section in the Modules tab of the FlexSim website: FlexSim Downloads The following are known issues: Acceleration implementation is not complete. Crossline Multiplier implementation is not complete. MFC.Motor property 'sections' is not working. Please post any feedback or bug reports either as a comment to this article or you can email them to dev@flexsim.com

Update June 27, 2017: Upgrade versions FloWorks 17.1.2 and FloWorks 17.0.5 are now available. These releases resolve an incompatibility that may result in errors on starting FlexSim when you install FloWorks in combination with certain other modules. If you want to use the (beta version of) the Emulation module, for example, you should upgrade FloWorks to this latest version. There are no functional changes. If you are using the LTS version (17.0.5) of FlexSim you should upgrade to FloWorks 17.0.5. Download FloWorks 17.1.2 if you are using FlexSim 2017 Update 1 (FlexSim 17.1.2). Both versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Bugs may be reported to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV ( talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license. For any questions, please email support@talumis.com. Release notes From FloWorks 17.0.4 to 17.0.5, and from FloWorks 17.1.1 to 17.1.2: Bug fix: Fixed errors when loading FloWorks with other modules dependent on Process Flow, such as the Emulation module. From FloWorks 17.0.3 to 17.0.4, and from FloWorks 17.1.0 to 17.1.1: The following bug fixes and usability improvements are available in both versions: Bug fix: Flow Conveyor with multiple inputs sometimes created too many update events. Bug fix: Flow Conveyor now allows input port at end of conveyor. Usability improvement: Pick list options updated to dot syntax, e.g. centerobject(current, 1) is now current.centerObjects[1]. Usability improvement: Changed object list dropdown to be more descriptive about input, output and center connections. Usability improvement: Changed input/output amount trigger template to increase current input/output instead of previous trigger amount Usability improvement: Added FloWorks options to User Event code dropdown. The following bug fixes apply to version 17.1.1 (FlexSim 2017 Update 1) only. Bug fix: Fixed exception when changing to first product of product table using scripting (thanks to Julio for reporting it) (product table is only available in FloWorks 17.1). Bug fix: Flow To Item releases item when pulling object downstream is unblocked (Bug was only present in FlexSim 17.1). Bug fix: Flow To Item now uses item.Type labels instead of deprecated setitemtype (getitemtype/setitemtype was deprecated in FlexSim 17.1). The release notes of older versions of FloWorks can be found here.

Why would I delete a fulfillment? You may need to manually delete a fulfillment from your PC if: Your license is broken. Sometimes you can fix this problem yourself by attempting a repair. However, you may get a message that the repair failed. "Repair: failure. Online return/repair request for the activation ID is not originated from the original client machine." In this case contact your local FlexSim distributor to explain the situation and let them take a look. Reference this post. If they determine it is best to delete the broken fulfillment, follow the instructions below to do so. Your distributor will then force-return the broken license so that it will be available for a new activation. You mistakenly requested a force-return of a license. If you later find the fulfillment that you thought was lost, that fulfillment is no longer able to be returned normally (because it was already force-returned). In these cases, and in a few other rare circumstances, you may find it necessary to manually remove a fulfillment from your computer. This process occurs exclusively on your computer without any communication with FlexSim's main license server. Delete your fulfillment FlexSim 23.0 or greater For FlexSim version 23.0.1 or greater, you can delete fulfillments using the License Activation window. From FlexSim's main menu, choose Help > License Activation. Under the Advanced tab, find the Delete sub-tab. Choose the fulfillment you'd like to remove from your computer and click Delete. Confirm your choice to remove the fulfillment from your computer. Currently licenses that are *BROKEN* do not show up in this list (how do licenses become broken?), so if this applies to your situation you will need to use the Older versions method below. Older versions Older FlexSim versions do not have a graphical interface for removing fulfillments, but you can still do so using a FlexScript command. Find the fulfillment ID The first step is to find the fulfillment ID of the license you want to return. This is an identifier unique to the activation you're removing. View your licenses to find the fulfillment ID you wish to remove from your PC. Prepare your delete command Once you know your broken fulfillment ID, you're ready to build the command that will remove it from your computer. licenseactivation(LA_DELETE_FULFILLMENT_RECORD, "paste entire 'FID_...' fulfillmentID here"); Be sure to paste the complete fulfillment ID into the 2nd parameter. Depending on your software's licensed state, you may be able to run this command directly in a script window. If not, we'll work around that limitation by using an object's reset trigger. Execute the delete command There are two ways to manually delete your fulfillment: Run the command in a script window Use a 3D object's reset trigger Run in a Script window If your FlexSim installation is still licensed, you can open a Script window to run FlexScript commands: Run the command console. You will be prompted to confirm that you truly want to remove the fulfillment: Choose Yes to remove the fulfillment. Use a 3D object's reset trigger If your FlexSim software is not licensed the Script command console is not available. Instead, do the following: Create a new model. Drag any object into the 3D view. Create a reset trigger on that object. Enter the FlexScript command into the reset trigger. Press OK to save the script. Reset the model. Choose Yes to confirm that you truly want to remove the fulfillment. If you have any questions or problems, please search our Answers Community for possible solutions. There is a good chance someone else has already asked your question. Still not finding what you're looking for? Submit a new question and we'll check it out. If you're including any confidential information, such as license codes, be sure to mark your question as private! You can also contact your local FlexSim distributor for live phone, web, or email help.

Have you received this licensing error? Operations error: 7032 Invalid fulfillment ID: FID_ ... (entire fulfillment ID listed) You may encounter this error during an attempted license return. This error means that the license server has no record of your license activation, and therefore is not able to recognize the return action from your unknown activation. This error should only be encountered under a few rare circumstances: 1. Rollback on FlexSim's main license server FlexSim's main license server could be rolled back to an earlier time due to a necessary database restoration in order to mitigate database corruption or other unforeseen issues or circumstances. License actions, such as license activations or returns, that occurred after the last viable backup was saved, but before its restoration, will be lost. The solution for any license affected will consist of one or both of the following: If an activation occurred during the lost time period you would need to manually remove any un-returnable fulfillments. Standalone - Delete fulfillment License Server - Delete fulfillment If a license return occurred during the time period, you should contact your local FlexSim distributor to request a force-return. Explain the error and this situation. 2. Change to FlexSim's licensing infrastructure Your FlexSim product has reached End-of-Life and the license server under which your license was originally activated has been retired. This situation is outlined in FlexSim's End User License Agreement > Software End-of-life. As of this writing, FlexSim has never retired any of our FlexNet licensing infrastructure and we currently have no plans to do so. This item is included here for completeness' sake and in the event that such future licensing changes occur. If you are using software past its End-of-Life date and you think this problem may be affecting you, please contact your local FlexSim distributor.

It may be necessary in rare circumstances to manually delete a fulfillment from your license server. You may need to do this if you mistakenly requested a force-return of your license, if FlexSim's main license server was rolled back to an earlier point in time, or some other rare circumstance.   This manual process occurs exclusively on your license server without any communication with FlexSim's main license server. This procedure applies to both online and offline/secure/air-gapped license servers.   Assumed configurations   All steps below assume that you followed the installation instructions as described in our license server installation instructions, and that all FlexSim's license server files were extracted to the location C:\FlexSim_LMTOOLS. Throughout these instructions we will reference files inside that folder.   Find your fulfillment ID   On your license server, run the flexsimserveractutil.exe program (C:\FlexSim_LMTOOLS\flexsimserveractutil\flexsimserveractutil.exe) by right-clicking and selecting Run as Administrator.     In the FlexSim ServerActUtil program, go to Tools > View License Rights.     Copy the Fulfillment ID for the Activation ID you intend to manually delete by highlighting the Fulfillment ID and pressing Ctrl+C.     Delete the fulfillment   In the FlexSim ServerActUtil program, go to Connect > Delete.     Paste your fulfillment ID into the field. Press the Delete button.     You should receive an indication of success.     If you have any questions or problems, please search our Answers Community for possible solutions. There is a good chance someone else has already asked your question. Still not finding what you're looking for? Submit a new question and we'll check it out. If you're including any confidential information, such as license codes, be sure to mark your question as private! You can also contact your local FlexSim distributor for live phone, web, or email help.

You may find it necessary to check the status of your licenses. Perhaps you're trying to diagnose some issue, or you want to check which license you have activated.   Here we explain how to view the licenses activated to your PC, and their status.   View your licenses   Open FlexSim. From the main menu, go to Help > License Activation. Go to the View Licenses tab. Press the View Licenses button. You should see a list of fulfillment information, or a message indicating that there are no licenses on your PC.   What does it all mean?   If you have licenses on your PC, each license listed includes a block with status and license info, including whether the license is fully trusted and enabled or broken, the unique fulfillment ID that pertains to this specific license activation, and more. You'll also see INCREMENT blocks for each feature that makes up your license.   Take action   Check the article Licensing Procedures under the Standalone Licensing heading for instructions if you need to repair or return your license or do other sorts of license maintenance.

FlexSim 2022 introduced a Reinforcement Learning tool that enables you to configure your model to be used as an environment for reinforcement learning algorithms. That tool makes connecting to FlexSim from a reinforcement learning algorithm easier, but that tool is not absolutely necessary for this type of connectivity. The same socket communication protocols that are used by that tool are available generally in FlexScript. Attached (ChangeoverTimesRL_V22.0.fsm) is the FlexSim 2022 model that you build as part of the Using Reinforcement Learning documentation that walks you through the process of building and preparing a FlexSim model for reinforcement learning, training an agent within that model environment, evaluating the performance of the trained reinforcement learning model, and using that trained model in a real production environment. Also attached (ChangeoverTimesRL_V6.0.fsm) is a model built with FlexSim 6.0.2 from 2012 that does the exact same thing, but with custom FlexScript user commands instead of the Reinforcement Learning tool. You can use this model with the example python scripts and FlexSim 6.0.2 in the same way that you can use the other model with those same scripts in FlexSim 2022. I'm providing this FlexSim 6 model as an example that demonstrates how you can communicate between FlexSim and other programs. The Reinforcement Learning tool certainly makes this type of communication easier and simpler, with a nice UI for specifying RL-specific parameters, but the fundamental principles of how this works have been available in FlexSim for many years using FlexScript. Hopefully this example can help teach and inspire those who wish to control or communicate with FlexSim from external sources for purposes other than just reinforcement learning. FlexSim is flexible, and the possibilities are endless.

You may find occasion to check the status of your licenses. Perhaps you're trying to diagnose some issue, or you want to check which license is activated, or how many seats. Here we explain how to view the licenses activated to your license server, and their status. Assumed configurations All steps below assume that you followed the installation instructions as described in our license server installation instructions, and that all FlexSim's license server files were extracted to the location C:\FlexSim_LMTOOLS. Throughout these instructions we will reference files inside that folder. View License Rights On your license server, run the flexsimserveractutil.exe program (C:\FlexSim_LMTOOLS\flexsimserveractutil\flexsimserveractutil.exe) by right-clicking and selecting Run as Administrator. In the FlexSim ServerActUtil program, go to Tools > View License Rights. An information block is printed for each license activated to your license server. You will find listed the unique fulfillment ID for each activation, along with the license code (also called an activation ID and listed here as entitlement ID), its status (fully trusted/enabled, broken, etc.), the number of seats activated, and for timed licenses, an expiration date. Take Action Check the article Licensing Procedures under the Network Licensing heading for instructions if you need to repair or return your license or do any other sort of license maintenance.

[ FlexSim 2016 ] FlexSim 2016 Update 2 is available. FlexSim's start page will automatically notify you of the update and allow you to download and install the update from within FlexSim. To manually download the installer log in to your account at www.flexsim.com, then go to the Downloads section. If you have bug reports or other feedback on the software, please email dev@flexsim.com or create a new idea in the Development space. Release Notes Added support for STEP and IGES 3D shapes. Added a Quick Library popup when you double-click on empty space or A/S Connect to empty space in the 3D view. Improved object rotation manipulation in the 3D view. Added sorting to toolbox for top level items. Added the ability to use the query() command with partitioned lists, using ListName.$1 or ListName.PartitionIDStr syntax. Added support for the ON clause in SQL queries using the query() command. Added support for the ARRAY_AGG() aggregation function in SQL queries using the query() command, in the manner of PostgreSQL. Added an "Allow Multiple Pushes Before Back Order Fulfillment" setting to lists. Added a "Reevaluate All Values On Push" setting to lists. Added a Date Based feature to gantt charts. Updated the auto-numbering mechanism when naming new objects. Updated file browse dialogs to remember the last used directory. Changed the default directory for opening and saving user libraries to be within documentsdir(). Added a colors tab to the tracked variable dashboard chart. Updated the Presentation Builder interface to make the timeline more useable. Updated the Animation Creator interface. Updated the Stop Time interface. Added range and type validation to many edit fields. Overhauled the FlexSim Web Server interface. Added functionality to the Webserver to restrict access to certain models using Windows Authentication. Fixed a bug with the window docking system that caused sizing to not work properly sometimes. Fixed TimeTable Excel Import bug not working with Daily/Weekly Repeat table. Fixed the Visual Studio project files so they don't give you the linker errors when you compile flexsimcontent.dll with Visual Studio. Fixed a bug with cell heights and widths when inserting and deleting table rows or columns. Fixed line charts continuing to collect data beyond their collect time. Fixed the query() command so that it can be called within List fields. Included fixes listed in 16.0.5. Process Flow Improved Process Flow view performance. Added Split, Join, and Synchronize activities. Added right-click options for re-ranking activities in a block and removing an activity from a block. Added tooltips to activities that show you the activity type. Added copy and paste options to the Process Flow right-click menu. Populated field names of lists for SQL drop-down menu options. Updated Text editing interface to be more user friendly. Added an "Assign Event Object To" option to the Wait For Event and Event-Triggered Source. Fixed a bug with Zone Partitions not being able to be graphed. Fixed an issue with connectors losing their ranks when clicking and dragging them. Fixed the List Back Order Reevaluation Events so you can listen to activity events. Fixed the Experimenter duplicating TEs/FRs attached to Process Flow objects not properly duplicating the Process Flow instance. Fixed Sub Flows that have Resources pointing to 3D objects in the model not properly creating/destroying copies of the 3D object. Fixed Resources in Fixed Resource and Task Executer Process Flows losing their references when being updated by a user library. Fixed a bug with the Pull from List where releasing the token and leaving the back order on the list would not give you all of the pulled results when using the 'Assign To' option. Fixed a bug with capturing ProcessFlow views at resolutions larger than the window size. AGV Added new agvinfo() command options. Updated paths so that they can be contained within visual tools. Backwards Compatibility Note: the following changes may slightly change the way updated models behave. Fixed issues with routing through path junctions where 3 or more paths connect. Conveyor Fixed an issue with manually moving a waiting item off a conveyor with a restart delay.

[ FlexSim 2016 ] FlexSim 2016, version 16.0.5, is available. To download the installer log in to your account at www.flexsim.com, then go to the Downloads section and click on More Versions. If you have bug reports or other feedback on the software, please email dev@flexsim.com or create a new idea in the Development space. Release Notes Fixed sin() command not displaying in the Command Helper. Fixed a bug when shift-selecting entire rows and columns of global tables. Fixed C++ Variant comparisons where the primitive is on the left side. Fixed the return values for CURRENT_MINUTE, CURRENT_SECOND, and CURRENT_MILLISECOND in getmodelunit(). Fixed a bug with SQL parsing of FlexScript functions returning doubles in 32-bit FlexSim. Fixed some pin buttons in the Stats window. Fixed a bug in a Pull From List pick option. Fixed Crane and Robot speeds not scaling with model units. Fixed a bug with the From/To Lookup Table popup not putting quotes around table names. Fixed a bug with exporting Custom Chart data as CSV sometimes not working. Fixed some UI issues with the Edit Name box for User Libraries. Fixed an exception in the Set Label trigger popup. Conveyor Fixed header for OnMessage trigger of Photo Eyes. Fixed decision point rotation in a rotated container. Fixed a bug with calculating the time that items will split off from each other when an ahead item speeds up. Fixed a rare crashing issue with accumulated items. Fixed an issue with resuming nonaccumulating conveyors that weren't stopped. Process Flow Fixed a UI bug with the process flow variable panel in Quick Properties when opening a model. Fixed some instance references from showing just the name to now showing the path to better distinguish objects in containers. Fixed an extra line being added in the token Shared Assets list when requesting a Zone. Fixed the Quick Library so you can collapse sections. AGV Fixed issue with click-creating AGV control points before creating paths. Fixed issue with calling stopobject() on an agv when it has arrived at a control point at (near) zero speed.

FlexSim 2023 is now available for download. For more in-depth discussion of the new features, check out the official software release page: FlexSim 2023: Enhancements to Bonsai Integration (AI), Emulation, AGV/AMR, and more You can view the Release Notes in the online user manual. FlexSim 23.0.0 Release Notes If you have bug reports or other feedback on the software, please email dev@flexsim.com or create a new idea in the Development space.

FlexSim 2022 is now available for download. You can view the Release Notes in the online user manual. For more in depth discussion and videos of the new features, check out the official software release page. If you have bug reports or other feedback on the software, please email dev@flexsim.com or create a new idea in the Development space.

Preparation   You may want to brush up on how a license version is related to a product version.   When you understand what version of FlexSim will work with your license, download and install an appropriate software version for your license.   If your computer is not connected to the Internet, you will need to transfer FlexSim's installer to your computer on a USB drive or some other method.   You will also need to be able to transfer XML license files to and from your offline computer.   NOTE: If this is the first time a license has been activated on this computer, an initial XML request/response communication will be needed to configure your local Trusted Storage.   This means that for a first ever license activation on a given computer, complete the steps below for just a single Activation ID - that will configure your computer's Trusted Storage.   Once that is complete, repeat again the entire Manual XML activation process for that initial Activation ID and any other Activation IDs that will be installed to this computer.   Find your licenses   Log in to your FlexSim Account, click the Licenses link in the top menu. In the Licenses submenu, choose List. Expand the various product and version folders to find the Activation ID you wish to activate. An Activation ID looks similar to this example: yourcompany.com01-ABCDE-FGHIJ-KLMNO-FSENT16.2   Create manual activation requests   Open FlexSim Software. In FlexSim's main menu, Go to Help > License Activation. Click the Advanced tab. Go to the Manual Activation sub-tab. Enter a valid Activation ID into the field (see the Find your licenses heading, above). Click the Generate Request button. You will be prompted to save an XML file. Choose a location and filename to save your XML activation request. If this is your first time ever activating any FlexSim licenses on this PC, only generate an XML request for one activation ID (see red-highlighted note above). Otherwise, repeat steps 4-6 for all licenses you wish to activate on this PC, so that all your XML activation request files can be transferred at one time.   Submit your manual activation requests   Transfer your XML activation requests to a computer with Internet access. From your Internet-connected computer, open a web browser and login to your FlexSim Account. Click the Licenses link in the header, then choose Manual XML in the Licenses submenu. Upload your XML files by dragging them onto the drop zone. Your uploaded XML requests will be processed. Upon completion, you will be prompted to download each XML response.   Process your manual activation responses   Transfer your downloaded XML activation responses to the offline computer you are licensing. In FlexSim, using the same licensing interface where you generated your request, click the Process Response button. Browse to an XML activation response file. FlexSim should give you an indication of successful processing of your activation, and your activation will be complete. Repeat to process the XML activation responses for any other licenses you are manually activating.   IMPORTANT NOTE   If this is the first time a license has been activated on this computer, an initial request/response communication will only serve to configure your local Trusted Storage.   This means that for a first ever license activation on a given computer, after this first request/response has been successfully processed on the offline computer, a 2nd request using the same license code will need to be generated/uploaded/processed/downloaded/processed to fully activate your license.   This is a one-time event per-computer. Subsequent license activations to the same system require only one request/response XML pair. If you have any questions or problems, please search our Community for possible solutions. There is a good chance someone else has already asked your question.   Still not finding what you're looking for? Licensed users can submit a support request and we'll check it out.

FlexSim 2019 Update 1 Beta is available. (Updated 11 April 2019) IMPORTANT NOTE: The 15-Mar beta installer has a bug that causes the current installer to hang during the Cleaning Up stage when upgrading from the 15-Mar beta to a newer beta version. We have resolved the issue for future installers, but to avoid the error now, uninstall the 15-Mar beta using Add/Remove Programs before installing the new version. To get the beta, log in to your account at www.flexsim.com, then go to the Downloads section, and click on More Versions. It will be at the top of the list. If you have bug reports or other feedback on the software, please email dev@flexsim.com or create a new idea in the Development space. Release Notes Added a new graphical interface to the Calculated Table for building queries. Updated the UI for editing rack dimensions. Added more options for customizing people visuals. Moved operator shape options from the Operator tab to Quick Properties. Improved edit modes by using right-click to cancel the current action instead of immediately exiting the mode. Added global preferences for process flow and dashboard library options. Added the FlexScript API reference to the user manual and made it accessible outside of FlexSim. Added toolbar support for adding multiple model background drawings. Adjusted how the floor Z and grid Z settings work to improve multi-floor modeling. Updated the table view to show more helpful information for certain data types. Added support for pointer data in bundles. Added a pointer type to tracked variables. Added support for the NULLIF SQL keyword. Added support for linking combo boxes to nodes with pointer data. Improved the gantt chart. Updated how tree files are saved to improve saving certain datatypes. Updated pulling from lists to throw an exception when passing a bad query. Fixed a bug with the normal map lighting calculation. Fixed an issue with the picking focus when using drawsurrogate within a drawsurrogate object. Fixed exceptions on an array table that doesn't have column header information. Fixed an issue related to moving items that had not been released. Backwards Compatibility Note: the following changes may slightly change the way updated models behave. Updated the internal structure of the Rack object's variables. Removed the rackgetcontenttable() command. Removed support for running the simulation from a loaded state file. Process Flow Added an option to the container to center its title when the contents are hidden. Added a limit to the number of activity panels displayed in quick properties. Added a Milestone activity. People Added a Healthcare environment option. Added an Elevator Bank object. Added a Prop object and more options for object visuals. Added tables that automatically collect statistics for people models. Added people chart templates. Added a People Settings object to the toolbox for people models. Improved the names of people created with the Create Person activity. AGV Updated the distancetotravel() calculation to work with moving AGVs. A* Added support for multiple grids. Adjusted how conditions are defined to improve performance.