FloWorks 25.1.0 is now available (15 April). This version of FloWorks is intended for use with FlexSim 2025 Update 1. If you are using FloWorks with FlexSim 2024, please update to FloWorks version 24.0.8. If you are using FloWorks with FlexSim 2024 Update 2, please update to FloWorks version 24.2.2. If you are using FloWorks with FlexSim 2025 (LTS), please update to FloWorks version 25.0.2. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV (talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes View the full release notes in the online documentation. FloWorks 25.1.0 (15 April 2025) All changes in version 25.0.2 FloWorks 25.0.2 (15 April 2025) All changes in version 24.0.8. Improvement: Updated FloWorks tutorials Bug fix: merged duplicate "Modules" folders in offline User Manual FloWorks 25.0.1 (21 January 2025) FloWorks was not loading correctly in FlexSim 25.0.2. FlexSim Compatibility Note: This release of FloWorks is for FlexSim 25.0.2 and higher versions. For FlexSim 25.0.0 and FlexSim 25.0.1, please use FloWorks 25.0.0 or upgrade your FlexSim version. FloWorks 25.0.0 (19 December 2024) Improvement: FlowConveyor can be reversed. All bug fixes in FloWorks 24.2.1 below. FloWorks 24.2.2 (15 April 2025) All changes in version v24.0.8. Bug fix: merged duplicate "Modules" folders in offline User Manual FloWorks 24.2.1 (19 December 2024) Improvement: Made Disconnect Flow Objects properties more clear. All bug fixes in FloWorks 24.0.6 below. FloWorks 24.2.0 (6 August 2024) Bug fix: removed flicker due to unnecessary repaint in ApplyImpactFactor QuickProperties panel. All bug fixes in FloWorks 24.0.4 below. FloWorks 24.1.1 (6 August 2024) Bug fix: removed flicker due to unnecessary repaint in ApplyImpactFactor QuickProperties panel. All bug fixes in FloWorks 24.0.4 below. FloWorks 24.1.0 (17 April 2024) Feature: new "Apply Impact Factor" activity in ProcessFlow. Feature: new "Connect Flow Objects" and "Disconnect Flow Objects" activities in ProcessFlow. All bug fixes in FloWorks 24.0.3 below. FloWorks 24.0.8 (15 April 2025) Improvement: Setting .content of multi-product tank will now increase or decrease layers as if there was inflow or outflow. Improvement: Internal build tools updated to ensure for example FloWorks FlexScript API documentation is always updated and Table of Contents of online and offline manual are synchronized. Improvement: Installer no longer contains the build number in the filename (e.g. FloWorks_25.0.1.msi instead of FloWorks_25.0.1.2348721.msi). Improvement: More actions create a module dependency, such as creating a FloWorks object through Object.create . Improvement: Start joint of a flow pipe can now be dragged too; also added controls on the segments to drag the whole pipe in z-direction. Improvement: Impact ID in functions like FlowObject.stop() are now Variant instead of treenode . Backwards Compatibility Note: The following may change the way updated models behave. Improvement: Setting trigger interval will now cancel and recalculate already scheduled trigger. See the extended note at Set Flow Trigger - "Interval (each)". FloWorks 24.0.7 (21 January 2025) FloWorks was not loading correctly in FlexSim 24.0.8. FlexSim Compatibility Note: This release of FloWorks is for FlexSim 24.0.8 and higher versions. For FlexSim 24.0.7 and earlier, please use FloWorks 24.0.6 or upgrade your FlexSim version. FloWorks 24.0.6 (19 December 2024) Bug fix: Flow Mixer stops with error when pulling product from an invalid port. Bug fix: Reactor vessel shape was not correctly upgraded to 24.0 from older versions. Bug fix: FlowConveyor content visualization was incorrect. Bug fix: SharedResource showed exception and didn't work correctly. Improvement: Impact events can be resumed with a Variant id identifier instead of treenode eventObject . Improvement: Fixed many incorrect tooltips in the FloWorks ProcessFlow activities. FloWorks 24.0.5 (27 August 2024) Bug fix: Version 24.0.4 installer contained an incorrect module (.t) file Bug fix: Removed ProcessFlow activities which are only available from 24.1 from the drag/drop library FloWorks 24.0.4 (6 August 2024) Bug fix: FlowToItem was not behaving correctly when an item buffer was used. Bug fix: Fixed a timing issue when FlowToItem got starved while an item was being released. Bug fix: Fixed some rounding issues in event scheduling. Bug fix: Fixed Quick Properties product combo when product has been deleted. Bug fix: Missing states 19 and 20 added to state profile. Bug fix: Fixed several issues in FlowConveyor visualization. Bug fix: Invalid curved FlowConveyor animation fixed. Bug fix: Invalid initial content for Segmented Pipe fixed. Bug fix: "FlowConveyor content changes are not allowed" error (and subsequent exception) fixed. Improvment: Curved conveyor now also supports FlowConveyor length property. Improvement: Tank label hidden in FlowItems (FlowVessel and FlowTruck). Improvement: Cleaned up the variables in the FlowItems' model tree. Improvement: Tank size/position and max content changed for FlowTruck, also as FlowTaskExecuter. Improvement: Slight optimization in preventing unnecessary FlowControl events. Improvement: Added SetMaxContent for FlowToItem and improved handling for Flow Tanks. FloWorks 24.0.3 (17 April 2024) QuickProperties behavior improved. Fixed invalid manual references. Fixed missing code completion documentation. FloWorks 24.0.2 (6 March 2024) Made activity path references in warning message more clear. Restore missing Flow Trigger Process Flow activities to the library. Fixed Tank level indicator settings for some tank shapes. Add Accumulating checkbox to the Conveyor properties. FloWorks 24.0.1 (5 February 2024) Added vertical splitter to Mixer recipe editor and other small layout improvements. Fixed missing icons in statistics panel pin menus. Flow Polygon Tank property panels fixed and documentation updated. Added "Fill Sideways" property for Flow Polygon Tank. IsMultiProduct setting on Flow Tank is now a proper property. Renamed Flow Tank shapes from Cylindric and Rectangular to Tank and Container, respectively. Fixed "Copy Production Plan" button in Flow To Item properties. Some objects were not correctly reset. ItemToFlow statistics were accessible through .output instead of .input . Breaking changes: Deprecated the input.triggerAmount , input.triggerInterval , output.triggerAmount , and output.triggerInterval properties. FlowObject.stats.input and FlowObject.stats.output now return a Tracked Variable. Cylindric level indicator now expects size of bounding box instead of center and radius. The update script will try to convert these for you. FloWorks 24.0.0 (14 January 2024) All bug fixes in FloWorks 23.0.5 below. Improved warning and error messages throughout Fixed rounding issue in Mass Flow Conveyor

FlexSim 2025 Update 1 is now available for download. You can view the Release Notes in the online user manual. FlexSim 25.1.0 Release Notes For more in-depth discussion of the new features, check out the official software release page: FlexSim 2025 Update 1: Change Object Class, Exports, AGVs, Timed Travel, and more If you have bug reports or other feedback on the software, please create a new post in the Bug Report space or Development space.

RailWorks 25.0.1 is now available (19 March 2025). This version of RailWorks is intended for use with FlexSim 2025. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to developmentbrflexsim@flexsbr.com.br. Rail Network: New feature in RailWorks The Rail Network feature provides users with an intuitive and efficient way to design and connect railway systems. With a user-friendly interface, this tool enables seamless track placement, automatic node linking, and real-time validation to ensure smooth rail operations. Users can quickly define routes, junctions, and stations while leveraging smart snapping and alignment aids to simplify complex track layouts. This feature is designed for both beginners and advanced users, offering powerful tools to build scalable and efficient rail networks with minimal effort. New Speed Table: New feature in RailWorks Offering more speed possibilities to configurate all the movement parameters, the new speed table covers all movement speeds, acceleration and deceleration parameters, making the model more plausible and adherent to the real world process. About Railworks The FlexSim Brazil RailWorks module consists of premade custom objects, designed to represent a real environment for the Rail problem modeling, with less configuration. Our approach is to unite 3D modeling with the Process Flow functionality, allowing object configuration and visualization through the native 3D FlexSim solution, and the rail system events to be triggered by the Process Flow, using not only defaults FlexSim Process Flow activities, but also new ones developed by our team. Release Notes View the full release notes in the online documentation. RailWorks 25.0.1 (19 March 2025) Features Feature: Rail Network A new way to create and connect your rails into the model. Simple as network nodes, now you can connect the RailNetwork nodes and easily create your own rail tracks. Feature: New Speed table Offering more speed possibilities to configurate all the movement parameters, the new speed table covers all movement speeds, acceleration and deceleration parameters, making the model more plausible and adherent to the real world process. Bug-Fixes Fixed moveWagon auto decouple operation. Fixed a bug where SendToPortal was not freeing rails. RailWorks 24.2.7 (17 January 2025) Bug-Fixes Fixed moveWagon auto decouple operation. Fixed a bug where SendToPortal was not freeing rails. RailWorks 24.2.6 (17 October 2024) Bug-Fixes Improved couple and decouple internal operations. Improved offset calculations internal operations. Fixed a bug where all flowItem classes was the same in different stations. Fixed a bug with passenger locomotive. RailWorks 24.2.5 (25 September 2024) Bug-Fixes Fixed a bug on creating Station object.

FlexSim 2025 Update 1 Beta is now available. FlexSim 25.1.0 Release Notes To get the beta, log in to your account at https://account.flexsim.com, then go to the Downloads section, and click on More Versions. It will be at the top of the list. The More Versions button does not appear when logged in as a guest account. The beta is available only to licensed accounts and accounts that have a license shared with them. Learn more about downloading the best version of FlexSim for your license here. If you have bug reports or other feedback on the software, please create a new post in the Bug Report space or Development space.

FloWorks 25.0.1 is now available (21 January). This version of FloWorks is intended for use with FlexSim 2025 (LTS). If you are using FloWorks with FlexSim 2024, please update to FloWorks version 24.0.7. If you are using FloWorks with FlexSim 2024 Update 2, please update to FloWorks version 24.2.1. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV (talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes View the full release notes in the online documentation. FloWorks 25.0.1 (21 January 2025) FloWorks was not loading correctly in FlexSim 25.0.2. FlexSim Compatibility Note: This release of FloWorks is for FlexSim 25.0.2 and higher versions. It may not work with FlexSim 25.0.1 and earlier. FloWorks 25.0.0 (19 December 2024) Improvement: FlowConveyor can be reversed. All bug fixes in FloWorks 24.2.1 below. FloWorks 24.2.1 (19 December 2024) Improvement: Made Disconnect Flow Objects properties more clear. All bug fixes in FloWorks 24.0.6 below. FloWorks 24.2.0 (6 August 2024) Bug fix: removed flicker due to unnecessary repaint in ApplyImpactFactor QuickProperties panel. All bug fixes in FloWorks 24.0.4 below. FloWorks 24.1.1 (6 August 2024) Bug fix: removed flicker due to unnecessary repaint in ApplyImpactFactor QuickProperties panel. All bug fixes in FloWorks 24.0.4 below. FloWorks 24.1.0 (17 April 2024) Feature: new "Apply Impact Factor" activity in ProcessFlow. Feature: new "Connect Flow Objects" and "Disconnect Flow Objects" activities in ProcessFlow. All bug fixes in FloWorks 24.0.3 below. FloWorks 24.0.7 (21 January 2025) FloWorks was not loading correctly in FlexSim 24.0.8. FlexSim Compatibility Note: This release of FloWorks is for FlexSim 24.0.8 and higher versions. For FlexSim 24.0.7 and earlier, please use FloWorks 24.0.7. FloWorks 24.0.6 (19 December 2024) Bug fix: Flow Mixer stops with error when pulling product from an invalid port. Bug fix: Reactor vessel shape was not correctly upgraded to 24.0 from older versions. Bug fix: FlowConveyor content visualization was incorrect. Bug fix: SharedResource showed exception and didn't work correctly. Improvement: Impact events can be resumed with a Variant id identifier instead of treenode eventObject . Improvement: Fixed many incorrect tooltips in the FloWorks ProcessFlow activities. FloWorks 24.0.5 (27 August 2024) Bug fix: Version 24.0.4 installer contained an incorrect module (.t) file Bug fix: Removed ProcessFlow activities which are only available from 24.1 from the drag/drop library FloWorks 24.0.4 (6 August 2024) Bug fix: FlowToItem was not behaving correctly when an item buffer was used. Bug fix: Fixed a timing issue when FlowToItem got starved while an item was being released. Bug fix: Fixed some rounding issues in event scheduling. Bug fix: Fixed Quick Properties product combo when product has been deleted. Bug fix: Missing states 19 and 20 added to state profile. Bug fix: Fixed several issues in FlowConveyor visualization. Bug fix: Invalid curved FlowConveyor animation fixed. Bug fix: Invalid initial content for Segmented Pipe fixed. Bug fix: "FlowConveyor content changes are not allowed" error (and subsequent exception) fixed. Improvment: Curved conveyor now also supports FlowConveyor length property. Improvement: Tank label hidden in FlowItems (FlowVessel and FlowTruck). Improvement: Cleaned up the variables in the FlowItems' model tree. Improvement: Tank size/position and max content changed for FlowTruck, also as FlowTaskExecuter. Improvement: Slight optimization in preventing unnecessary FlowControl events. Improvement: Added SetMaxContent for FlowToItem and improved handling for Flow Tanks. FloWorks 24.0.3 (17 April 2024) QuickProperties behavior improved. Fixed invalid manual references. Fixed missing code completion documentation. FloWorks 24.0.2 (6 March 2024) Made activity path references in warning message more clear. Restore missing Flow Trigger Process Flow activities to the library. Fixed Tank level indicator settings for some tank shapes. Add Accumulating checkbox to the Conveyor properties. FloWorks 24.0.1 (5 February 2024) Added vertical splitter to Mixer recipe editor and other small layout improvements. Fixed missing icons in statistics panel pin menus. Flow Polygon Tank property panels fixed and documentation updated. Added "Fill Sideways" property for Flow Polygon Tank. IsMultiProduct setting on Flow Tank is now a proper property. Renamed Flow Tank shapes from Cylindric and Rectangular to Tank and Container, respectively. Fixed "Copy Production Plan" button in Flow To Item properties. Some objects were not correctly reset. ItemToFlow statistics were accessible through .output instead of .input . Breaking changes: Deprecated the input.triggerAmount , input.triggerInterval , output.triggerAmount , and output.triggerInterval properties. FlowObject.stats.input and FlowObject.stats.output now return a Tracked Variable. Cylindric level indicator now expects size of bounding box instead of center and radius. The update script will try to convert these for you. FloWorks 24.0.0 (14 January 2024) All bug fixes in FloWorks 23.0.5 below. Improved warning and error messages throughout Fixed rounding issue in Mass Flow Conveyor

FlexSim 2025 is now available for download. You can view the Release Notes in the online user manual. FlexSim 25.0.0 Release Notes For more in-depth discussion of the new features, check out the official software release page: FlexSim 2025: Container Object, Task Sequence Queue, and more If you have bug reports or other feedback on the software, please create a new post in the Bug Report space or Development space.

FlexSim 2025 Beta is now available. FlexSim 25.0.0 Release Notes To get the beta, log in to your account at https://account.flexsim.com, then go to the Downloads section, and click on More Versions. It will be at the top of the list. The More Versions button does not appear when logged in as a guest account. The beta is available only to licensed accounts and accounts that have a license shared with them. Learn more about downloading the best version of FlexSim for your license here. If you have bug reports or other feedback on the software, please create a new post in the Bug Report space or Development space.

FloWorks 24.2.0 is now available (6 August). This version of FloWorks is intended for use with FlexSim 2024 Update 2. If you are using FloWorks with FlexSim 2024 (LTS), please update to FloWorks version 24.0.5 (LTS). If you are using FloWorks with FlexSim 2024 Update 1, please update to FloWorks version 24.1.1. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV (talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes View the full release notes in the online documentation. FloWorks 24.2.0 (6 August 2024) Bug fix: removed flicker due to unnecessary repaint in ApplyImpactFactor QuickProperties panel. All bug fixes in FloWorks 24.0.4 below. FloWorks 24.1.1 (6 August 2024) Bug fix: removed flicker due to unnecessary repaint in ApplyImpactFactor QuickProperties panel. All bug fixes in FloWorks 24.0.4 below. FloWorks 24.1.0 (17 April 2024) Feature: new "Apply Impact Factor" activity in ProcessFlow. Feature: new "Connect Flow Objects" and "Disconnect Flow Objects" activities in ProcessFlow. All bug fixes in FloWorks 24.0.3 below. FloWorks 24.0.5 (27 August 2024) Bug fix: Version 24.0.4 installer contained an incorrect module (.t) file Bug fix: Removed ProcessFlow activities which are only available from 24.1 from the drag/drop library FloWorks 24.0.4 (6 August 2024) Bug fix: FlowToItem was not behaving correctly when an item buffer was used. Bug fix: Fixed a timing issue when FlowToItem got starved while an item was being released. Bug fix: Fixed some rounding issues in event scheduling. Bug fix: Fixed Quick Properties product combo when product has been deleted. Bug fix: Missing states 19 and 20 added to state profile. Bug fix: Fixed several issues in FlowConveyor visualization. Bug fix: Invalid curved FlowConveyor animation fixed. Bug fix: Invalid initial content for Segmented Pipe fixed. Bug fix: "FlowConveyor content changes are not allowed" error (and subsequent exception) fixed. Improvment: Curved conveyor now also supports FlowConveyor length property. Improvement: Tank label hidden in FlowItems (FlowVessel and FlowTruck). Improvement: Cleaned up the variables in the FlowItems' model tree. Improvement: Tank size/position and max content changed for FlowTruck, also as FlowTaskExecuter. Improvement: Slight optimization in preventing unnecessary FlowControl events. Improvement: Added SetMaxContent for FlowToItem and improved handling for Flow Tanks. FloWorks 24.0.3 (17 April 2024) QuickProperties behavior improved. Fixed invalid manual references. Fixed missing code completion documentation. FloWorks 24.0.2 (6 March 2024) Made activity path references in warning message more clear. Restore missing Flow Trigger Process Flow activities to the library. Fixed Tank level indicator settings for some tank shapes. Add Accumulating checkbox to the Conveyor properties. FloWorks 24.0.1 (5 February 2024) Added vertical splitter to Mixer recipe editor and other small layout improvements. Fixed missing icons in statistics panel pin menus. Flow Polygon Tank property panels fixed and documentation updated. Added "Fill Sideways" property for Flow Polygon Tank. IsMultiProduct setting on Flow Tank is now a proper property. Renamed Flow Tank shapes from Cylindric and Rectangular to Tank and Container, respectively. Fixed "Copy Production Plan" button in Flow To Item properties. Some objects were not correctly reset. ItemToFlow statistics were accessible through .output instead of .input . Breaking changes: Deprecated the input.triggerAmount , input.triggerInterval , output.triggerAmount , and output.triggerInterval properties. FlowObject.stats.input and FlowObject.stats.output now return a Tracked Variable. Cylindric level indicator now expects size of bounding box instead of center and radius. The update script will try to convert these for you. FloWorks 24.0.0 (14 January 2024) All bug fixes in FloWorks 23.0.5 below. Improved warning and error messages throughout Fixed rounding issue in Mass Flow Conveyor

FlexSim 2024 Update 2 is now available for download. You can view the Release Notes in the online user manual. FlexSim 24.2.0 Release Notes For more in-depth discussion of the new features, check out the official software release page: FlexSim 2024 Update 2: Curve Fitter, Process Flow Breakpoints, and more If you have bug reports or other feedback on the software, please create a new idea in the Bug Report space or Development space.

FlexSim 2024 Update 2 Beta is now available. FlexSim 24.2.0 Release Notes To get the beta, log in to your account at https://account.flexsim.com, then go to the Downloads section, and click on More Versions. It will be at the top of the list. The More Versions button does not appear when logged in as a guest account. The beta is available only to licensed accounts and accounts that have a license shared with them. Learn more about downloading the best version of FlexSim for your license here. If you have bug reports or other feedback on the software, please create a new post in the Bug Report space or Development space.

FloWorks 24.1.0 is now available (17 April 2024). This version of FloWorks is intended for use with FlexSim 2024 Update 1. If you are using FloWorks with FlexSim 2024 (LTS), please use FloWorks version 24.0.3 (LTS). All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV ( talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes View the full release notes in the online documentation. FloWorks 24.1.0 (17 April 2024) Feature: new "Apply Impact Factor" activity in ProcessFlow. Feature: new "Connect Flow Objects" and "Disconnect Flow Objects" activities in ProcessFlow. All bug fixes in FloWorks 24.0.3 below. FloWorks 24.0.3 (17 April 2024) QuickProperties behavior improved. Fixed invalid manual references. Fixed missing code completion documentation. FloWorks 24.0.2 (6 March 2024) Made activity path references in warning message more clear. Restore missing Flow Trigger Process Flow activities to the library. Fixed Tank level indicator settings for some tank shapes. Add Accumulating checkbox to the Conveyor properties. FloWorks 24.0.1 (5 February 2024) Added vertical splitter to Mixer recipe editor and other small layout improvements. Fixed missing icons in statistics panel pin menus. Flow Polygon Tank property panels fixed and documentation updated. Added "Fill Sideways" property for Flow Polygon Tank. IsMultiProduct setting on Flow Tank is now a proper property. Renamed Flow Tank shapes from Cylindric and Rectangular to Tank and Container, respectively. Fixed "Copy Production Plan" button in Flow To Item properties. Some objects were not correctly reset. ItemToFlow statistics were accessible through .output instead of .input . Breaking changes: Deprecated the input.triggerAmount , input.triggerInterval , output.triggerAmount , and output.triggerInterval properties. FlowObject.stats.input and FlowObject.stats.output now return a Tracked Variable. Cylindric level indicator now expects size of bounding box instead of center and radius. The update script will try to convert these for you. FloWorks 24.0.0 (14 January 2024) All bug fixes in FloWorks 23.0.5 below. Improved warning and error messages throughout Fixed rounding issue in Mass Flow Conveyor

FlexSim 2024 Update 1 is now available for download. You can view the Release Notes in the online user manual. FlexSim 24.1.0 Release Notes If you have bug reports or other feedback on the software, please email dev@flexsim.com or create a new idea in the Bug Report space or Development space.

Railworks 24.0.1 is now available (02 April 2024). This version of RailWorks is intended for use with FlexSim 2024. Railworks 2023.0 will become LTS, for any use cases with updated bug fixes use the latest 23.0 version available. If you are using RailWorks with FlexSim 2023 (LTS), please use RailWorks version 23.0.6 (LTS). If you are using RailWorks with FlexSim 2023 Update 2, please use RailWorks version 23.2.3. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to dev@flexsimbrasil.com.br. Signal: New feature in railworks This new feature adds a 3D object called Signalized Rail, a track with signals that can control train traffic with precise speed changes, sight and safety distances for rail reservations and signal advances. You can configure signal aspects, sight distance and train safety distance with just this object.For more information read 3Dobjects. Importance of the Signal A signal in a railroad system is a way of controlling train traffic speeds, ensuring safety and maximizing the flow. There are different types of signals for different cases and countries, the most common being speed control signals on sections to prevent train collisions. These signals change their appearance in order to indicate a reduction in speed, and can have different aspects for different speed changes. This type of sign is the new railworks feature. About Railworks The FlexSim Brazil RailWorks module consists of premade custom objects, designed to represent a real environment for the Rail problem modeling, with less configuration. Our approach is to unite 3D modeling with the Process Flow functionality, allowing object configuration and visualization through the native 3D FlexSim solution, and the rail system events to be triggered by the Process Flow, using not only defaults FlexSim Process Flow activities, but also new ones developed by our team. Release Notes View the full release notes in the online documentation. RailWorks 24.0.1 (02 April 2024) Bug-Fixes All bug fixes in RailWorks 23.2.3 below. Features New object:Introducing signalized rails - tracks equipped with signs at their ends for improved traffic control and safety at critical network points. Learn more about signaled rails and practice using them on the 3D objects page. Feature:Take control of your rail network with the new rail signaling control feature. Configure aspect signals, customize their colors, set speed correspondences, and define safety or sighting distances for a more realistic train operation experience. Feature: New picklist options to set destination in MoveTrain and MoveWagon activities. RailWorks 23.2.3 (18 March 2024) Bug-Fixes All bug fixes in RailWorks 23.0.6 below. MoveWagon Label Control Improvements: Enhanced the user interface for the MoveWagon label control. OnPass Speed Alteration Fix: Compositions with wagons attached change speeds correctly and consistently. AssingTo labels on MoveWagon Fix: The creation of a new label works with individual wagons on MoveWagon. RailWorks 23.0.6 (18 March 2024) Bug-Fixes Consistent Parked Wagons Positioning: Wagons now position themselves alongside other wagons more consistently. Rail Reservation Logic Optimized: Improved logic for rail reservation to ensure smooth operation. Refined Rail Control Point Triggers: More precise behavior for RailControlPoint's onPass, onContinue, and onArrival triggers. Smoother Undo Functionality: Improved responsiveness and reliability of the undo function (Ctrl+Z). Automatic Brakes Optimized: Automatic brakes now stop on the correct rail for better train control. Wagon Creation Streamlined: Wagon creation now adapts its position automatically when placed on multiple rails. Copy & Paste Errors Resolved:Fixed exceptions that occurred during copy and paste operations. Train Creation Collisions Addressed: Inconsistent collisions during train creation have been eliminated. Enhanced Locomotive Interaction: Improved interaction between compartments and leading locomotives for more realistic behavior. Departure Rail Control Point Fix: Fixed an issue where moving a wagon wouldn't release the departure Rail Control Point. Automatic Braking Refined: Improved automatic braking for scenarios with low acceleration and high speeds. Multiple Rail Braking Enhanced: Resolved issues with braking zones spanning multiple rails. Limited Station Parking: Locomotives destined to a Station no longer allowed to enter while occupied. Better Composition Positioning on Curved Rails: Movement on CurvedRails is now smoother. Added Locomotive and Wagon icons to FlowItemBin. Modelling fixes: Preventive fixes to improve modelling experience. Performance Enhancements Faster Rail Connections: Optimized rail automatic connection for improved performance. MoveWagon Streamlined: Object selection offers more consistent behavior when detaching wagons from larger compositions. Streamlined ConnectPoint Creation: Made changes to ConnectPoint creation for better performance. Optimized Pathfinding: Enhanced path discovery algorithms to improve overall performance. Status Window Consolidation: Review and behavior correction of status bubble on flowitems and task executers.

FlexSim 2024 Update 1 Beta is now available. FlexSim 24.1.0 Release Notes To get the beta, log in to your account at https://account.flexsim.com, then go to the Downloads section, and click on More Versions. It will be at the top of the list. The More Versions button does not appear when logged in as a guest account. The beta is available only to licensed accounts and accounts that have a license shared with them. Learn more about downloading the best version of FlexSim for your license here. If you have bug reports or other feedback on the software, please email dev@flexsim.com or create a new idea in the Bug Report space or Development space.

FloWorks 24.0.5 is now available (27 August 2024). This version of FloWorks is intended for use with FlexSim 2024. If you are using FloWorks with FlexSim 2023 (LTS), please use FloWorks version 23.0.5 (LTS). If you are using FloWorks with FlexSim 2023 Update 2, please use FloWorks version 23.2.2. For FlexSim 2024 Update 1 or FlexSim 2024 Update 2, please use the FloWorks version starting with 24.1 or 24.2, respectively. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV ( talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes View the full release notes in the online documentation. FloWorks 24.0.5 (27 August 2024) Bug fix: Version 24.0.4 installer contained an incorrect module (.t) file Bug fix: Removed ProcessFlow activities which are only available from 24.1 from the drag/drop library FloWorks 24.0.4 (6 August 2024) Bug fix: FlowToItem was not behaving correctly when an item buffer was used. Bug fix: Fixed a timing issue when FlowToItem got starved while an item was being released. Bug fix: Fixed some rounding issues in event scheduling. Bug fix: Fixed Quick Properties product combo when product has been deleted. Bug fix: Missing states 19 and 20 added to state profile. Bug fix: Fixed several issues in FlowConveyor visualization. Bug fix: Invalid curved FlowConveyor animation fixed. Bug fix: Invalid initial content for Segmented Pipe fixed. Bug fix: "FlowConveyor content changes are not allowed" error (and subsequent exception) fixed. Improvment: Curved conveyor now also supports FlowConveyor length property. Improvement: Tank label hidden in FlowItems (FlowVessel and FlowTruck). Improvement: Cleaned up the variables in the FlowItems' model tree. Improvement: Tank size/position and max content changed for FlowTruck, also as FlowTaskExecuter. Improvement: Slight optimization in preventing unnecessary FlowControl events. Improvement: Added SetMaxContent for FlowToItem and improved handling for Flow Tanks. FloWorks 24.0.3 (17 April 2024) QuickProperties behavior improved. Fixed invalid manual references. Fixed missing code completion documentation FloWorks 24.0.2 (6 March 2024) Made activity path references in warning message more clear Restore missing Flow Trigger Process Flow activities to the library Fixed Tank level indicator settings for some tank shapes Add Accumulating checkbox to the Conveyor properties FloWorks 24.0.1 (5 February 2024) Added vertical splitter to Mixer recipe editor and other small layout improvements. Fixed missing icons in statistics panel pin menus. Flow Polygon Tank property panels fixed and documentation updated. Added "Fill Sideways" property for Flow Polygon Tank. IsMultiProduct setting on Flow Tank is now a proper property. Renamed Flow Tank shapes from Cylindric and Rectangular to Tank and Container, respectively. Fixed "Copy Production Plan" button in Flow To Item properties. Some objects were not correctly reset. ItemToFlow statistics were accessible through .output instead of .input . Breaking changes: Deprecated the input.triggerAmount , input.triggerInterval , output.triggerAmount , and output.triggerInterval properties. FlowObject.stats.input and FlowObject.stats.output now return a Tracked Variable. Cylindric level indicator now expects size of bounding box instead of center and radius. The update script will try to convert these for you. FloWorks 24.0.0 (14 January 2024) All bug fixes in FloWorks 23.0.5 below. Improved warning and error messages throughout Fixed rounding issue in Mass Flow Conveyor FloWorks 23.2.2 All bug fixes in FloWorks 23.0.5 below. FloWorks 23.2.1 (7 November 2023) All bug fixes in FloWorks 23.0.4 below. FloWorks 23.2.0 (10 August 2023) All bug fixes in FloWorks 23.0.3 below. FloWorks 23.1.3 All bug fixes in FloWorks 23.0.5 below. FloWorks 23.1.2 (7 November 2023) All bug fixes in FloWorks 23.0.4 below. FloWorks 23.1.1 (26 July 2023) All bug fixes in FloWorks 23.0.3 below. FloWorks 23.1.0 (12 April 2023) Segmented Pipe: removed virtual content and fixed properties Changed default content of flow tanks and mixer from 50,000 to 1,000. All bug fixes in FloWorks 23.0.2 below. FloWorks 23.0.5 Rounding error mode added to Flow control. Improved error message when new content exceeds max content Added ratios function to FlowComposition Error message doesn't show time when stepping, but shows it when running Bug fix: Flow Pipe "Calculate Max. Content From Size" was not working Bug fix: Statistics nodes content, input and output checked during rate precalculation Bug fix: Flow control group panel Statistics renamed to Tracked Variables Bug fix: FlowComposition interface fixed Bug fix: GetProductTypeAmount function fixed for new flow conveyor Bug fix: Tank full event is not scheduled in some cases Bug fix: Flow rates are not always converted when using non-standard units Bug fix: FlowPipe max content update in QuickProperties also updates the current content Bug fix: Set flow rate activity does not always set both in and outflow rate Bug fix: Level indicator is not allowed to be set to 0 Bug fix: Several Segmented Pipe draw issues fixed Bug fix: Names of FloWorks ProcessFlow activities were made more consistent with FlexSim style Bug fix: Set Product Type activity shows list of defined products when using a product table Bug fix: Name dropdown of ProcessFlow statistics popup also working for FloWorks activities Bug fix: Fixed On Full / On Empty event sometimes firing twice for the same tank top / bottom FloWorks 23.0.4 (7 November 2023) Bug fix: Fixed several errors in Flow Conveyor content calculations Bug fix: Additional checks on input / output and triggers when rounding content Backwards Compatibility Note: The following change may change the way updated models behave. Bug fix: Fixed an issue with binding of interface classes. This sometimes caused replications to get initialized incorrectly in an existing FlexSim experimenter instance. FloWorks 23.0.3 (26 July 2023) Bug fix: Module dependency shows invalid module version number All bug fixes in FloWorks 22.0.7 below. FloWorks 23.0.2 (12 April 2023) Moved flow control to toolbox Support time series, level triggered event and workability in Tools.create and Tools.get Added context menu option to disable time series in toolbox Added dot syntax to create flow controls, get the default flow control, and request recalculation of a flow control's network All bug fixes in FloWorks 22.0.6 below. FloWorks 23.0.1 (16 March 2023) All bug fixes in FloWorks 22.0.5 below. FloWorks 23.0.0 (6 January 2023) Improvement: FlowConveyor snapping improved between conveyors. Improvement: Made FlowConveyor properties available in property tables. Improvement: Extra FlowConveyor options added, such as virtual length support. Improvement: Compare Properties enabled for all active FloWorks objects. Improvement: Toolbox items "Level Triggered Event" and "Time Series" support disabled icon. Improvement: MassFlowConveyor supports stacked products. All bug fixes in FloWorks 22.0.4 below (please note the Known Issues information there).

FlexSim 2024 is now available for download. You can view the Release Notes in the online user manual. FlexSim 24.0.0 Release Notes For more in-depth discussion of the new features, check out the official software release page: FlexSim 2024: Workspaces, Person Visuals, USD Support, and more If you have bug reports or other feedback on the software, please email dev@flexsim.com or create a new idea in the Bug Report space or Development space.

FlexSim 2024 Beta is now available. (Updated November 20) FlexSim 24.0.0 Release Notes To get the beta, log in to your account at https://account.flexsim.com, then go to the Downloads section, and click on More Versions. It will be at the top of the list. The More Versions button does not appear when logged in as a guest account. The beta is available only to licensed accounts and accounts that have a license shared with them. Learn more about downloading the best version of FlexSim for your license here. If you have bug reports or other feedback on the software, please email dev@flexsim.com or create a new idea in the Bug Report space or Development space.

FloWorks 23.2.0 is now available (10 August 2023). This version of FloWorks is intended for use with FlexSim 2023 Update 2. If you are using FloWorks with FlexSim 2023 (LTS), please use FloWorks version 23.0.3 (LTS). If you are using FloWorks with FlexSim 2023 Update 1, please use FloWorks version 23.1.1. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV ( talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes View the full release notes in the online documentation. FloWorks 23.2.0 Updated FloWorks for FlexSim 2023 Update 2. FloWorks 23.1.1 All bug fixes in FloWorks 23.0.3 below. FloWorks 23.1.0 (12 April 2023) Segmented Pipe: removed virtual content and fixed properties Changed default content of flow tanks and mixer from 50,000 to 1,000. All bug fixes in FloWorks 23.0.2 below. FloWorks 23.0.3 Bug fix: Module dependency shows invalid module version number All bug fixes in FloWorks 22.0.7 below. FloWorks 23.0.2 (12 April 2023) Moved flow control to toolbox Support time series, level triggered event and workability in Tools.create and Tools.get Added context menu option to disable time series in toolbox Added dot syntax to create flow controls, get the default flow control, and request recalculation of a flow control's network All bug fixes in FloWorks 22.0.6 below. FloWorks 22.0.7 Bug fix: Multi-product FlowTank blocks simulation when layer is small but nonzero, due to rounding error. FloWorks 22.0.6 (12 April 2023) Bug fix: Loading Arm processing time defaults to 10. Bug fix: fixed length³ to volume conversion for models in non-metric units Bug fix: fixed error message "FlowConveyor content changes are not allowed" Bug fix: flow conveyor density calculation was incorrect with non-metric units Bug fix: icon grid was not filtering correctly when A-connecting Bug fix: flow conveyor properties panel fixed Bug fix: added vertices editor to polygon flow tank quick properties Bug fix: after the first vessel, vessels were positioned incorrectly in the loading point Bug fix: quick properties now shows "Max. rate" for Loading Arm and "Max. inflow" for Flow Sink. Bug fix: removed duplicate Input / Output / Content change events from event selection list Bug fix: corrected input / output in on change event at end of warmup Bug fix: on empty and on full event would sometimes fire twice

FlexSim 2023 Update 2 is now available for download. You can view the Release Notes in the online user manual. FlexSim 23.2.0 Release Notes For more in-depth discussion of the new features, check out the official software release page: FlexSim 2023 Update 2: NVIDIA Omniverse, USD, Restricted Models, and more If you have bug reports or other feedback on the software, please email dev@flexsim.com or create a new idea in the Bug Report space or Development space.

FlexSim 2023 Update 2 Beta is now available. (Updated July 21) FlexSim 23.2.0 Release Notes To get the beta, log in to your account at https://account.flexsim.com, then go to the Downloads section, and click on More Versions. It will be at the top of the list. The More Versions button does not appear when logged in as a guest account. The beta is available only to licensed accounts and accounts that have a license shared with them. Learn more about downloading the best version of FlexSim for your license here. If you have bug reports or other feedback on the software, please email dev@flexsim.com or create a new idea in the Bug Report space or Development space.