FloWorks 24.2.0 is now available (6 August). This version of FloWorks is intended for use with FlexSim 2024 Update 2. If you are using FloWorks with FlexSim 2024 (LTS), please update to FloWorks version 24.0.5 (LTS). If you are using FloWorks with FlexSim 2024 Update 1, please update to FloWorks version 24.1.1. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV (talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes View the full release notes in the online documentation. FloWorks 24.2.0 (6 August 2024) Bug fix: removed flicker due to unnecessary repaint in ApplyImpactFactor QuickProperties panel. All bug fixes in FloWorks 24.0.4 below. FloWorks 24.1.1 (6 August 2024) Bug fix: removed flicker due to unnecessary repaint in ApplyImpactFactor QuickProperties panel. All bug fixes in FloWorks 24.0.4 below. FloWorks 24.1.0 (17 April 2024) Feature: new "Apply Impact Factor" activity in ProcessFlow. Feature: new "Connect Flow Objects" and "Disconnect Flow Objects" activities in ProcessFlow. All bug fixes in FloWorks 24.0.3 below. FloWorks 24.0.5 (27 August 2024) Bug fix: Version 24.0.4 installer contained an incorrect module (.t) file Bug fix: Removed ProcessFlow activities which are only available from 24.1 from the drag/drop library FloWorks 24.0.4 (6 August 2024) Bug fix: FlowToItem was not behaving correctly when an item buffer was used. Bug fix: Fixed a timing issue when FlowToItem got starved while an item was being released. Bug fix: Fixed some rounding issues in event scheduling. Bug fix: Fixed Quick Properties product combo when product has been deleted. Bug fix: Missing states 19 and 20 added to state profile. Bug fix: Fixed several issues in FlowConveyor visualization. Bug fix: Invalid curved FlowConveyor animation fixed. Bug fix: Invalid initial content for Segmented Pipe fixed. Bug fix: "FlowConveyor content changes are not allowed" error (and subsequent exception) fixed. Improvment: Curved conveyor now also supports FlowConveyor length property. Improvement: Tank label hidden in FlowItems (FlowVessel and FlowTruck). Improvement: Cleaned up the variables in the FlowItems' model tree. Improvement: Tank size/position and max content changed for FlowTruck, also as FlowTaskExecuter. Improvement: Slight optimization in preventing unnecessary FlowControl events. Improvement: Added SetMaxContent for FlowToItem and improved handling for Flow Tanks. FloWorks 24.0.3 (17 April 2024) QuickProperties behavior improved. Fixed invalid manual references. Fixed missing code completion documentation. FloWorks 24.0.2 (6 March 2024) Made activity path references in warning message more clear. Restore missing Flow Trigger Process Flow activities to the library. Fixed Tank level indicator settings for some tank shapes. Add Accumulating checkbox to the Conveyor properties. FloWorks 24.0.1 (5 February 2024) Added vertical splitter to Mixer recipe editor and other small layout improvements. Fixed missing icons in statistics panel pin menus. Flow Polygon Tank property panels fixed and documentation updated. Added "Fill Sideways" property for Flow Polygon Tank. IsMultiProduct setting on Flow Tank is now a proper property. Renamed Flow Tank shapes from Cylindric and Rectangular to Tank and Container, respectively. Fixed "Copy Production Plan" button in Flow To Item properties. Some objects were not correctly reset. ItemToFlow statistics were accessible through .output instead of .input . Breaking changes: Deprecated the input.triggerAmount , input.triggerInterval , output.triggerAmount , and output.triggerInterval properties. FlowObject.stats.input and FlowObject.stats.output now return a Tracked Variable. Cylindric level indicator now expects size of bounding box instead of center and radius. The update script will try to convert these for you. FloWorks 24.0.0 (14 January 2024) All bug fixes in FloWorks 23.0.5 below. Improved warning and error messages throughout Fixed rounding issue in Mass Flow Conveyor

FloWorks 25.1.0 is now available (15 April). This version of FloWorks is intended for use with FlexSim 2025 Update 1. If you are using FloWorks with FlexSim 2024, please update to FloWorks version 24.0.8. If you are using FloWorks with FlexSim 2024 Update 2, please update to FloWorks version 24.2.2. If you are using FloWorks with FlexSim 2025 (LTS), please update to FloWorks version 25.0.2. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV (talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes View the full release notes in the online documentation. FloWorks 25.1.0 (15 April 2025) All changes in version 25.0.2 FloWorks 25.0.2 (15 April 2025) All changes in version 24.0.8. Improvement: Updated FloWorks tutorials Bug fix: merged duplicate "Modules" folders in offline User Manual FloWorks 25.0.1 (21 January 2025) FloWorks was not loading correctly in FlexSim 25.0.2. FlexSim Compatibility Note: This release of FloWorks is for FlexSim 25.0.2 and higher versions. For FlexSim 25.0.0 and FlexSim 25.0.1, please use FloWorks 25.0.0 or upgrade your FlexSim version. FloWorks 25.0.0 (19 December 2024) Improvement: FlowConveyor can be reversed. All bug fixes in FloWorks 24.2.1 below. FloWorks 24.2.2 (15 April 2025) All changes in version v24.0.8. Bug fix: merged duplicate "Modules" folders in offline User Manual FloWorks 24.2.1 (19 December 2024) Improvement: Made Disconnect Flow Objects properties more clear. All bug fixes in FloWorks 24.0.6 below. FloWorks 24.2.0 (6 August 2024) Bug fix: removed flicker due to unnecessary repaint in ApplyImpactFactor QuickProperties panel. All bug fixes in FloWorks 24.0.4 below. FloWorks 24.1.1 (6 August 2024) Bug fix: removed flicker due to unnecessary repaint in ApplyImpactFactor QuickProperties panel. All bug fixes in FloWorks 24.0.4 below. FloWorks 24.1.0 (17 April 2024) Feature: new "Apply Impact Factor" activity in ProcessFlow. Feature: new "Connect Flow Objects" and "Disconnect Flow Objects" activities in ProcessFlow. All bug fixes in FloWorks 24.0.3 below. FloWorks 24.0.8 (15 April 2025) Improvement: Setting .content of multi-product tank will now increase or decrease layers as if there was inflow or outflow. Improvement: Internal build tools updated to ensure for example FloWorks FlexScript API documentation is always updated and Table of Contents of online and offline manual are synchronized. Improvement: Installer no longer contains the build number in the filename (e.g. FloWorks_25.0.1.msi instead of FloWorks_25.0.1.2348721.msi). Improvement: More actions create a module dependency, such as creating a FloWorks object through Object.create . Improvement: Start joint of a flow pipe can now be dragged too; also added controls on the segments to drag the whole pipe in z-direction. Improvement: Impact ID in functions like FlowObject.stop() are now Variant instead of treenode . Backwards Compatibility Note: The following may change the way updated models behave. Improvement: Setting trigger interval will now cancel and recalculate already scheduled trigger. See the extended note at Set Flow Trigger - "Interval (each)". FloWorks 24.0.7 (21 January 2025) FloWorks was not loading correctly in FlexSim 24.0.8. FlexSim Compatibility Note: This release of FloWorks is for FlexSim 24.0.8 and higher versions. For FlexSim 24.0.7 and earlier, please use FloWorks 24.0.6 or upgrade your FlexSim version. FloWorks 24.0.6 (19 December 2024) Bug fix: Flow Mixer stops with error when pulling product from an invalid port. Bug fix: Reactor vessel shape was not correctly upgraded to 24.0 from older versions. Bug fix: FlowConveyor content visualization was incorrect. Bug fix: SharedResource showed exception and didn't work correctly. Improvement: Impact events can be resumed with a Variant id identifier instead of treenode eventObject . Improvement: Fixed many incorrect tooltips in the FloWorks ProcessFlow activities. FloWorks 24.0.5 (27 August 2024) Bug fix: Version 24.0.4 installer contained an incorrect module (.t) file Bug fix: Removed ProcessFlow activities which are only available from 24.1 from the drag/drop library FloWorks 24.0.4 (6 August 2024) Bug fix: FlowToItem was not behaving correctly when an item buffer was used. Bug fix: Fixed a timing issue when FlowToItem got starved while an item was being released. Bug fix: Fixed some rounding issues in event scheduling. Bug fix: Fixed Quick Properties product combo when product has been deleted. Bug fix: Missing states 19 and 20 added to state profile. Bug fix: Fixed several issues in FlowConveyor visualization. Bug fix: Invalid curved FlowConveyor animation fixed. Bug fix: Invalid initial content for Segmented Pipe fixed. Bug fix: "FlowConveyor content changes are not allowed" error (and subsequent exception) fixed. Improvment: Curved conveyor now also supports FlowConveyor length property. Improvement: Tank label hidden in FlowItems (FlowVessel and FlowTruck). Improvement: Cleaned up the variables in the FlowItems' model tree. Improvement: Tank size/position and max content changed for FlowTruck, also as FlowTaskExecuter. Improvement: Slight optimization in preventing unnecessary FlowControl events. Improvement: Added SetMaxContent for FlowToItem and improved handling for Flow Tanks. FloWorks 24.0.3 (17 April 2024) QuickProperties behavior improved. Fixed invalid manual references. Fixed missing code completion documentation. FloWorks 24.0.2 (6 March 2024) Made activity path references in warning message more clear. Restore missing Flow Trigger Process Flow activities to the library. Fixed Tank level indicator settings for some tank shapes. Add Accumulating checkbox to the Conveyor properties. FloWorks 24.0.1 (5 February 2024) Added vertical splitter to Mixer recipe editor and other small layout improvements. Fixed missing icons in statistics panel pin menus. Flow Polygon Tank property panels fixed and documentation updated. Added "Fill Sideways" property for Flow Polygon Tank. IsMultiProduct setting on Flow Tank is now a proper property. Renamed Flow Tank shapes from Cylindric and Rectangular to Tank and Container, respectively. Fixed "Copy Production Plan" button in Flow To Item properties. Some objects were not correctly reset. ItemToFlow statistics were accessible through .output instead of .input . Breaking changes: Deprecated the input.triggerAmount , input.triggerInterval , output.triggerAmount , and output.triggerInterval properties. FlowObject.stats.input and FlowObject.stats.output now return a Tracked Variable. Cylindric level indicator now expects size of bounding box instead of center and radius. The update script will try to convert these for you. FloWorks 24.0.0 (14 January 2024) All bug fixes in FloWorks 23.0.5 below. Improved warning and error messages throughout Fixed rounding issue in Mass Flow Conveyor

FloWorks 24.0.5 is now available (27 August 2024). This version of FloWorks is intended for use with FlexSim 2024. If you are using FloWorks with FlexSim 2023 (LTS), please use FloWorks version 23.0.5 (LTS). If you are using FloWorks with FlexSim 2023 Update 2, please use FloWorks version 23.2.2. For FlexSim 2024 Update 1 or FlexSim 2024 Update 2, please use the FloWorks version starting with 24.1 or 24.2, respectively. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV ( talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes View the full release notes in the online documentation. FloWorks 24.0.5 (27 August 2024) Bug fix: Version 24.0.4 installer contained an incorrect module (.t) file Bug fix: Removed ProcessFlow activities which are only available from 24.1 from the drag/drop library FloWorks 24.0.4 (6 August 2024) Bug fix: FlowToItem was not behaving correctly when an item buffer was used. Bug fix: Fixed a timing issue when FlowToItem got starved while an item was being released. Bug fix: Fixed some rounding issues in event scheduling. Bug fix: Fixed Quick Properties product combo when product has been deleted. Bug fix: Missing states 19 and 20 added to state profile. Bug fix: Fixed several issues in FlowConveyor visualization. Bug fix: Invalid curved FlowConveyor animation fixed. Bug fix: Invalid initial content for Segmented Pipe fixed. Bug fix: "FlowConveyor content changes are not allowed" error (and subsequent exception) fixed. Improvment: Curved conveyor now also supports FlowConveyor length property. Improvement: Tank label hidden in FlowItems (FlowVessel and FlowTruck). Improvement: Cleaned up the variables in the FlowItems' model tree. Improvement: Tank size/position and max content changed for FlowTruck, also as FlowTaskExecuter. Improvement: Slight optimization in preventing unnecessary FlowControl events. Improvement: Added SetMaxContent for FlowToItem and improved handling for Flow Tanks. FloWorks 24.0.3 (17 April 2024) QuickProperties behavior improved. Fixed invalid manual references. Fixed missing code completion documentation FloWorks 24.0.2 (6 March 2024) Made activity path references in warning message more clear Restore missing Flow Trigger Process Flow activities to the library Fixed Tank level indicator settings for some tank shapes Add Accumulating checkbox to the Conveyor properties FloWorks 24.0.1 (5 February 2024) Added vertical splitter to Mixer recipe editor and other small layout improvements. Fixed missing icons in statistics panel pin menus. Flow Polygon Tank property panels fixed and documentation updated. Added "Fill Sideways" property for Flow Polygon Tank. IsMultiProduct setting on Flow Tank is now a proper property. Renamed Flow Tank shapes from Cylindric and Rectangular to Tank and Container, respectively. Fixed "Copy Production Plan" button in Flow To Item properties. Some objects were not correctly reset. ItemToFlow statistics were accessible through .output instead of .input . Breaking changes: Deprecated the input.triggerAmount , input.triggerInterval , output.triggerAmount , and output.triggerInterval properties. FlowObject.stats.input and FlowObject.stats.output now return a Tracked Variable. Cylindric level indicator now expects size of bounding box instead of center and radius. The update script will try to convert these for you. FloWorks 24.0.0 (14 January 2024) All bug fixes in FloWorks 23.0.5 below. Improved warning and error messages throughout Fixed rounding issue in Mass Flow Conveyor FloWorks 23.2.2 All bug fixes in FloWorks 23.0.5 below. FloWorks 23.2.1 (7 November 2023) All bug fixes in FloWorks 23.0.4 below. FloWorks 23.2.0 (10 August 2023) All bug fixes in FloWorks 23.0.3 below. FloWorks 23.1.3 All bug fixes in FloWorks 23.0.5 below. FloWorks 23.1.2 (7 November 2023) All bug fixes in FloWorks 23.0.4 below. FloWorks 23.1.1 (26 July 2023) All bug fixes in FloWorks 23.0.3 below. FloWorks 23.1.0 (12 April 2023) Segmented Pipe: removed virtual content and fixed properties Changed default content of flow tanks and mixer from 50,000 to 1,000. All bug fixes in FloWorks 23.0.2 below. FloWorks 23.0.5 Rounding error mode added to Flow control. Improved error message when new content exceeds max content Added ratios function to FlowComposition Error message doesn't show time when stepping, but shows it when running Bug fix: Flow Pipe "Calculate Max. Content From Size" was not working Bug fix: Statistics nodes content, input and output checked during rate precalculation Bug fix: Flow control group panel Statistics renamed to Tracked Variables Bug fix: FlowComposition interface fixed Bug fix: GetProductTypeAmount function fixed for new flow conveyor Bug fix: Tank full event is not scheduled in some cases Bug fix: Flow rates are not always converted when using non-standard units Bug fix: FlowPipe max content update in QuickProperties also updates the current content Bug fix: Set flow rate activity does not always set both in and outflow rate Bug fix: Level indicator is not allowed to be set to 0 Bug fix: Several Segmented Pipe draw issues fixed Bug fix: Names of FloWorks ProcessFlow activities were made more consistent with FlexSim style Bug fix: Set Product Type activity shows list of defined products when using a product table Bug fix: Name dropdown of ProcessFlow statistics popup also working for FloWorks activities Bug fix: Fixed On Full / On Empty event sometimes firing twice for the same tank top / bottom FloWorks 23.0.4 (7 November 2023) Bug fix: Fixed several errors in Flow Conveyor content calculations Bug fix: Additional checks on input / output and triggers when rounding content Backwards Compatibility Note: The following change may change the way updated models behave. Bug fix: Fixed an issue with binding of interface classes. This sometimes caused replications to get initialized incorrectly in an existing FlexSim experimenter instance. FloWorks 23.0.3 (26 July 2023) Bug fix: Module dependency shows invalid module version number All bug fixes in FloWorks 22.0.7 below. FloWorks 23.0.2 (12 April 2023) Moved flow control to toolbox Support time series, level triggered event and workability in Tools.create and Tools.get Added context menu option to disable time series in toolbox Added dot syntax to create flow controls, get the default flow control, and request recalculation of a flow control's network All bug fixes in FloWorks 22.0.6 below. FloWorks 23.0.1 (16 March 2023) All bug fixes in FloWorks 22.0.5 below. FloWorks 23.0.0 (6 January 2023) Improvement: FlowConveyor snapping improved between conveyors. Improvement: Made FlowConveyor properties available in property tables. Improvement: Extra FlowConveyor options added, such as virtual length support. Improvement: Compare Properties enabled for all active FloWorks objects. Improvement: Toolbox items "Level Triggered Event" and "Time Series" support disabled icon. Improvement: MassFlowConveyor supports stacked products. All bug fixes in FloWorks 22.0.4 below (please note the Known Issues information there).

FloWorks 25.0.1 is now available (21 January). This version of FloWorks is intended for use with FlexSim 2025 (LTS). If you are using FloWorks with FlexSim 2024, please update to FloWorks version 24.0.7. If you are using FloWorks with FlexSim 2024 Update 2, please update to FloWorks version 24.2.1. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV (talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes View the full release notes in the online documentation. FloWorks 25.0.1 (21 January 2025) FloWorks was not loading correctly in FlexSim 25.0.2. FlexSim Compatibility Note: This release of FloWorks is for FlexSim 25.0.2 and higher versions. It may not work with FlexSim 25.0.1 and earlier. FloWorks 25.0.0 (19 December 2024) Improvement: FlowConveyor can be reversed. All bug fixes in FloWorks 24.2.1 below. FloWorks 24.2.1 (19 December 2024) Improvement: Made Disconnect Flow Objects properties more clear. All bug fixes in FloWorks 24.0.6 below. FloWorks 24.2.0 (6 August 2024) Bug fix: removed flicker due to unnecessary repaint in ApplyImpactFactor QuickProperties panel. All bug fixes in FloWorks 24.0.4 below. FloWorks 24.1.1 (6 August 2024) Bug fix: removed flicker due to unnecessary repaint in ApplyImpactFactor QuickProperties panel. All bug fixes in FloWorks 24.0.4 below. FloWorks 24.1.0 (17 April 2024) Feature: new "Apply Impact Factor" activity in ProcessFlow. Feature: new "Connect Flow Objects" and "Disconnect Flow Objects" activities in ProcessFlow. All bug fixes in FloWorks 24.0.3 below. FloWorks 24.0.7 (21 January 2025) FloWorks was not loading correctly in FlexSim 24.0.8. FlexSim Compatibility Note: This release of FloWorks is for FlexSim 24.0.8 and higher versions. For FlexSim 24.0.7 and earlier, please use FloWorks 24.0.7. FloWorks 24.0.6 (19 December 2024) Bug fix: Flow Mixer stops with error when pulling product from an invalid port. Bug fix: Reactor vessel shape was not correctly upgraded to 24.0 from older versions. Bug fix: FlowConveyor content visualization was incorrect. Bug fix: SharedResource showed exception and didn't work correctly. Improvement: Impact events can be resumed with a Variant id identifier instead of treenode eventObject . Improvement: Fixed many incorrect tooltips in the FloWorks ProcessFlow activities. FloWorks 24.0.5 (27 August 2024) Bug fix: Version 24.0.4 installer contained an incorrect module (.t) file Bug fix: Removed ProcessFlow activities which are only available from 24.1 from the drag/drop library FloWorks 24.0.4 (6 August 2024) Bug fix: FlowToItem was not behaving correctly when an item buffer was used. Bug fix: Fixed a timing issue when FlowToItem got starved while an item was being released. Bug fix: Fixed some rounding issues in event scheduling. Bug fix: Fixed Quick Properties product combo when product has been deleted. Bug fix: Missing states 19 and 20 added to state profile. Bug fix: Fixed several issues in FlowConveyor visualization. Bug fix: Invalid curved FlowConveyor animation fixed. Bug fix: Invalid initial content for Segmented Pipe fixed. Bug fix: "FlowConveyor content changes are not allowed" error (and subsequent exception) fixed. Improvment: Curved conveyor now also supports FlowConveyor length property. Improvement: Tank label hidden in FlowItems (FlowVessel and FlowTruck). Improvement: Cleaned up the variables in the FlowItems' model tree. Improvement: Tank size/position and max content changed for FlowTruck, also as FlowTaskExecuter. Improvement: Slight optimization in preventing unnecessary FlowControl events. Improvement: Added SetMaxContent for FlowToItem and improved handling for Flow Tanks. FloWorks 24.0.3 (17 April 2024) QuickProperties behavior improved. Fixed invalid manual references. Fixed missing code completion documentation. FloWorks 24.0.2 (6 March 2024) Made activity path references in warning message more clear. Restore missing Flow Trigger Process Flow activities to the library. Fixed Tank level indicator settings for some tank shapes. Add Accumulating checkbox to the Conveyor properties. FloWorks 24.0.1 (5 February 2024) Added vertical splitter to Mixer recipe editor and other small layout improvements. Fixed missing icons in statistics panel pin menus. Flow Polygon Tank property panels fixed and documentation updated. Added "Fill Sideways" property for Flow Polygon Tank. IsMultiProduct setting on Flow Tank is now a proper property. Renamed Flow Tank shapes from Cylindric and Rectangular to Tank and Container, respectively. Fixed "Copy Production Plan" button in Flow To Item properties. Some objects were not correctly reset. ItemToFlow statistics were accessible through .output instead of .input . Breaking changes: Deprecated the input.triggerAmount , input.triggerInterval , output.triggerAmount , and output.triggerInterval properties. FlowObject.stats.input and FlowObject.stats.output now return a Tracked Variable. Cylindric level indicator now expects size of bounding box instead of center and radius. The update script will try to convert these for you. FloWorks 24.0.0 (14 January 2024) All bug fixes in FloWorks 23.0.5 below. Improved warning and error messages throughout Fixed rounding issue in Mass Flow Conveyor

FloWorks 24.1.0 is now available (17 April 2024). This version of FloWorks is intended for use with FlexSim 2024 Update 1. If you are using FloWorks with FlexSim 2024 (LTS), please use FloWorks version 24.0.3 (LTS). All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV ( talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes View the full release notes in the online documentation. FloWorks 24.1.0 (17 April 2024) Feature: new "Apply Impact Factor" activity in ProcessFlow. Feature: new "Connect Flow Objects" and "Disconnect Flow Objects" activities in ProcessFlow. All bug fixes in FloWorks 24.0.3 below. FloWorks 24.0.3 (17 April 2024) QuickProperties behavior improved. Fixed invalid manual references. Fixed missing code completion documentation. FloWorks 24.0.2 (6 March 2024) Made activity path references in warning message more clear. Restore missing Flow Trigger Process Flow activities to the library. Fixed Tank level indicator settings for some tank shapes. Add Accumulating checkbox to the Conveyor properties. FloWorks 24.0.1 (5 February 2024) Added vertical splitter to Mixer recipe editor and other small layout improvements. Fixed missing icons in statistics panel pin menus. Flow Polygon Tank property panels fixed and documentation updated. Added "Fill Sideways" property for Flow Polygon Tank. IsMultiProduct setting on Flow Tank is now a proper property. Renamed Flow Tank shapes from Cylindric and Rectangular to Tank and Container, respectively. Fixed "Copy Production Plan" button in Flow To Item properties. Some objects were not correctly reset. ItemToFlow statistics were accessible through .output instead of .input . Breaking changes: Deprecated the input.triggerAmount , input.triggerInterval , output.triggerAmount , and output.triggerInterval properties. FlowObject.stats.input and FlowObject.stats.output now return a Tracked Variable. Cylindric level indicator now expects size of bounding box instead of center and radius. The update script will try to convert these for you. FloWorks 24.0.0 (14 January 2024) All bug fixes in FloWorks 23.0.5 below. Improved warning and error messages throughout Fixed rounding issue in Mass Flow Conveyor

27 July: Bug fix releases 22.0.7, 23.0.3 and 23.0.1 are now available. FloWorks 23.1.0 is now available (12 April 2023). This version of FloWorks is intended for use with FlexSim 2023 Update 1. If you are using FloWorks with FlexSim 2022, please use FloWorks version 22.0.6. If you are using FloWorks with FlexSim 2023 (LTS) please use FloWorks version 23.0.2. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV ( talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes View the full release notes in the online documentation. FloWorks 23.1.1 All bug fixes in FloWorks 23.0.3 below. FloWorks 23.1.0 (12 April 2023) Segmented Pipe: removed virtual content and fixed properties Changed default content of flow tanks and mixer from 50,000 to 1,000. All bug fixes in FloWorks 23.0.2 below. FloWorks 23.0.3 Bug fix: Module dependency shows invalid module version number All bug fixes in FloWorks 22.0.7 below. FloWorks 23.0.2 (12 April 2023) Moved flow control to toolbox Support time series, level triggered event and workability in Tools.create and Tools.get Added context menu option to disable time series in toolbox Added dot syntax to create flow controls, get the default flow control, and request recalculation of a flow control's network All bug fixes in FloWorks 22.0.6 below. FloWorks 22.0.7 Bug fix: Multi-product FlowTank blocks simulation when layer is small but nonzero, due to rounding error. FloWorks 22.0.6 (12 April 2023) Bug fix: Loading Arm processing time defaults to 10. Bug fix: fixed length³ to volume conversion for models in non-metric units Bug fix: fixed error message "FlowConveyor content changes are not allowed" Bug fix: flow conveyor density calculation was incorrect with non-metric units Bug fix: icon grid was not filtering correctly when A-connecting Bug fix: flow conveyor properties panel fixed Bug fix: added vertices editor to polygon flow tank quick properties Bug fix: after the first vessel, vessels were positioned incorrectly in the loading point Bug fix: quick properties now shows "Max. rate" for Loading Arm and "Max. inflow" for Flow Sink. Bug fix: removed duplicate Input / Output / Content change events from event selection list Bug fix: corrected input / output in on change event at end of warmup Bug fix: on empty and on full event would sometimes fire twice

FloWorks 23.2.0 is now available (10 August 2023). This version of FloWorks is intended for use with FlexSim 2023 Update 2. If you are using FloWorks with FlexSim 2023 (LTS), please use FloWorks version 23.0.3 (LTS). If you are using FloWorks with FlexSim 2023 Update 1, please use FloWorks version 23.1.1. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV ( talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes View the full release notes in the online documentation. FloWorks 23.2.0 Updated FloWorks for FlexSim 2023 Update 2. FloWorks 23.1.1 All bug fixes in FloWorks 23.0.3 below. FloWorks 23.1.0 (12 April 2023) Segmented Pipe: removed virtual content and fixed properties Changed default content of flow tanks and mixer from 50,000 to 1,000. All bug fixes in FloWorks 23.0.2 below. FloWorks 23.0.3 Bug fix: Module dependency shows invalid module version number All bug fixes in FloWorks 22.0.7 below. FloWorks 23.0.2 (12 April 2023) Moved flow control to toolbox Support time series, level triggered event and workability in Tools.create and Tools.get Added context menu option to disable time series in toolbox Added dot syntax to create flow controls, get the default flow control, and request recalculation of a flow control's network All bug fixes in FloWorks 22.0.6 below. FloWorks 22.0.7 Bug fix: Multi-product FlowTank blocks simulation when layer is small but nonzero, due to rounding error. FloWorks 22.0.6 (12 April 2023) Bug fix: Loading Arm processing time defaults to 10. Bug fix: fixed length³ to volume conversion for models in non-metric units Bug fix: fixed error message "FlowConveyor content changes are not allowed" Bug fix: flow conveyor density calculation was incorrect with non-metric units Bug fix: icon grid was not filtering correctly when A-connecting Bug fix: flow conveyor properties panel fixed Bug fix: added vertices editor to polygon flow tank quick properties Bug fix: after the first vessel, vessels were positioned incorrectly in the loading point Bug fix: quick properties now shows "Max. rate" for Loading Arm and "Max. inflow" for Flow Sink. Bug fix: removed duplicate Input / Output / Content change events from event selection list Bug fix: corrected input / output in on change event at end of warmup Bug fix: on empty and on full event would sometimes fire twice

FloWorks 22.2.0 is now available (31 August 2022). This version of FloWorks is intended for use with FlexSim 2022 Update 2. If you are using FloWorks with FlexSim 2022 Update 1, please use FloWorks version 22.1.1. If you are using FlexSim 2022 (LTS) please use FloWorks version 22.0.2. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV ( talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes FloWorks 22.2.0 New: Added a Flow Gauge object to measure and visualize the flow through a connection New: Added a Time Series object to the Toolbox as a source of daily, weekly or monthly changing values Improvement: Added several alternative shapes for Flow Source such as Plant and Well Improvement: Level Triggered Event now has an OnTriggerFired event that ProcessFlow can await Bug fix: Some additional issues with incorrect scaling when not using meters Bug fix: Flow tank level triggers issue with multiple levels (not) firing All bug fixes in FloWorks 22.0.2 below. Backwards Compatibility Note: The following change may change the way updated models behave. Flow Impact Event has been deprecated and may be removed in the future. Picklist options for applying impact factors have been added to FlexSim's own MTBF/MTTR and Timetable. As an improvement, the same picklist options are also available in Down Behaviors. FloWorks 22.1.1 All bug fixes in FloWorks 22.0.2 below. FloWorks 22.1.0 (12 May 2022) All bug fixes in FloWorks 22.0.1 below. FloWorks 22.0.2 Bug fix: FlowMixer.loadRecipe can handle re-ordered product tables Bug fix: Statistics are now correctly initialized for flow tanks created during run. FloWorks 22.0.1 (12 May 2022) Added support for Object Property Tables Bug fix: incorrect MassFlowConveyor content Bug fix: LoadingPoint issue with not-released positions (and status) Bug fix: Object created at incorrect scale when not using meters

The FloWorks module has been updated for FlexSim 2017 and is now available (December 2016). Update 1: Bug fix update 1 was released on Jan 23, 2017. Update 2: Bug fix update 2 and FloWorks 17.1 for FlexSim 2017 Update 1 were released on Apr 11, 2017. FloWorks is a 3rd party module developed and maintained by Talumis BV ( talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license. For any questions, please email support@talumis.com. Release notes FloWorks version 2017.0.1 (Jan 23, 2017) Bug fix: Missing names and items in Flow Item Bin fixed. Bug fix: Properties window for Flow Tank flow item now opens correctly. Bug fix: Resolved some minor issues with "Add to dashboard" pins. FloWorks version 2017.0.0 (Dec 22, 2016) FloWorks updated for FlexSim 2017 Flow Mixer now has a manual mode, that will put it in Idle mode after each batch until you manually call StartMixerRecipe. Allow Input Rate and Output Rate to be plotted versus time. New Workability and Level Triggered Event objects added with focus in particular on modelling of ports and offshore processes. Unfilled part of Flow Tank is no longer necessarily gray but takes the object color. When Impact Events are active on a FloWorks object, they will show a box around the object similar to the "stopobject" behavior in standard FlexSim. The color of the box varies from red (0) through yellow to green (1) to black (infinity) depending on the impact factor of the event. Dropdown lists for port actions improved. For example, you can now open or close a single port (OpenFlowIp c.s.), select an individual port to open, close input and open output, etc. Increased limits on number of objects and events when running unlicensed version in FlexSim Educational version. Bug fix: Can now add Object Groups to FloWorks charts. Bug fix: When changing a Flow Task Executer from vessel to truck, the TE's flow tank is correctly scaled and positioned on reset. Bug fix: The State display in the Quick Properties did not correctly show the state of the Loading Arm. Bug fix: Arrow heads can now be dragged by holding 'X' key instead of Alt. User commands consolidated and documentation updated: ConnectFlowObjectToOtherObject command rewritten and documented. All documentation in modules\FloWorks\help\Commands reformatted and automatically generated based on actual user commands. These help pages often provide more explanation on the parameters and their optional values, the return types, and more extensive examples than the FlexSim Command Helper pages. Integration with the Process Flow module: FloWorks options added to "Listener Initialized" trigger of "Wait for event" action. Dropdown lists for port actions improved. For example, you can now open or close a single port (OpenFlowIp c.s.), select an individual port to open, close input and open output, etc. Backwards Compatibility Note: the following change may slightly change the way updated models behave. The Item To Flow's OnItemEmptied trigger is now fired before the actual item is destroyed, so that you are still able to reference it in the trigger code.

Update: FloWorks 17.2.1 has been released on September 18. FloWorks 17.2.0 for FlexSim 2017 Update 2 has been released. This new version of FloWorks has some major changes to align it with recent updates to FlexSim, such as dot syntax, Process Flow templates, and a revised user manual. The bug fixes in this version are also available for FlexSim 2017 Update 1 as FloWorks version 17.1.3 and for FlexSim 2017 (LTS) as FloWorks version 17.0.6. FloWorks downloads can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV ( talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes FloWorks 17.2.1 Bug fix: Adding charts using "Pin" buttons would show error message. Bug fix: Incorrect reference in Wait For Event activity in Mixer recipe schedule template for Process Flow; disabled Repeat Schedule by default. Bug fix: FloWorks objects remove pending events from the list when they are destroyed. FloWorks 17.2.0 (September 1, 2017) For FlexSim version 17.1.x use FloWorks 17.1.3. For FlexSim version 17.0.x (LTS) use FloWorks 17.0.6. Added FlowObject class interface ("dot syntax") for majority of FloWorks objects. Can now access products by name when using FloWorks product table ( e.g. source.product = "Raw material" instead of source.product = 3 ). Can define recipes for products in the products table and dynamically load / execute them on Flow Mixers. Added Process Flow templates for mixers executing production schedule and flow tank with cleaning / certification. Updated Pin to Dashboard buttons to use Statistics Collectors to collect data. Revised most of the user manual (tutorials are missing, will be re-released in a future version). Bug fix: Calling SelectFlowIp and SelectFlowOp with multiple ports produced FlexSim error. Bug fix: When using a product table, sometimes the Product dropdown would not show the correct product when opening Properties. Bug fix: Flow Conveyor would not suspend correctly when output flow restricted. FloWorks 17.1.3 For FlexSim version 17.2.x use FloWorks 17.2.0. For FlexSim version 17.0.x (LTS) use FloWorks 17.0.6. Bug fix: Calling SelectFlowIp and SelectFlowOp with multiple ports produced FlexSim error. Bug fix: When using a product table, sometimes the Product dropdown would not show the correct product when opening Properties. Bug fix: Flow Conveyor and Mass Flow Conveyor can cause FlexSim to crash, when used in combination with a product table. Bug fix: Flow Conveyor would not suspend correctly when output flow restricted. FloWorks 17.0.6 For FlexSim version 17.2.x use FloWorks 17.2.0. For FlexSim version 17.1.x (LTS) use FloWorks 17.1.3. Bug fix: Calling SelectFlowIp and SelectFlowOp with multiple ports produced FlexSim error.

FloWorks 17.2.0 will be released in parallel with FlexSim 2017 Update 2. This new version of FloWorks has some major changes to align it with recent updates to FlexSim, such as dot syntax, Process Flow templates, and a revised user manual. Therefore we are releasing it as a public beta. The latest beta version, released August 21, can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Click "More Versions" to show the Beta release. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV (talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes Note: the bug fixes will also be available in versions 17.1.3 and 17.0.6, where applicable. Added FlowObject class interface ("dot syntax") for majority of FloWorks objects. Can now access products by name when using FloWorks product table (e.g. source.product = "Raw material" instead of source.product = 3 ). Can define recipes for products in the products table and dynamically load / execute them on Flow Mixers. Added Process Flow templates for mixers executing production schedule and flow tank with cleaning / certification. Updated Pin to Dashboard buttons to use Statistics Collectors to collect data. Revised most of the user manual (tutorials are missing, will be re-released in a future version). Bug fix: Calling SelectFlowIp and SelectFlowOp with multiple ports produced FlexSim error. Bug fix: When using a product table, sometimes the Product dropdown would not show the correct product when opening Properties. Bug fix: Flow Conveyor would not suspend correctly when output flow restricted.

Você tem dúvidas sobre o que é, ou como funciona o FloWorks? Este Tutorial, composto de 3 vídeos, garante um overview sobre o FloWorks: Vídeos: Introdução ao FloWorks: O que é? Como funciona? Como construir um modelo com o FloWorks: Aprenda a reproduzir um modelo simples Analisando Sistemas com o FloWorks: Observe um exemplo de análise de modelo com o FloWorks Esperamos que aproveitem mais este vídeo tutorial.

O link que segue leva a um vídeo no qual é apresentado um exemplo de Análise de Sistema utilizando-se o módulo FloWorks FlexSim. No vídeo, um modelo Portuário é analisado com o objetivo de encontrar o gargalo do Sistema. Vídeo Tutorial: FloWorks - Análise de Modelo Esperamos que aproveitem mais este vídeo tutorial.

17 Mar: Bug fix releases 22.0.5, 22.2.3 and 23.0.1 are now available. FloWorks 23.0.0 is now available (06 January 2023). This version of FloWorks is intended for use with FlexSim 2023. If you are using FloWorks with FlexSim 2022 (LTS) you can upgrade to FloWorks version 22.0.4. If you are using FlexSim 2022 Update 2, you can upgrade to FloWorks version 22.2.2. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV (talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes FloWorks 23.0.1 All bug fixes in FloWorks 22.0.5 below. FloWorks 23.0.0 (6 January 2023) Improvement: FlowConveyor snapping improved between conveyors. Improvement: Made FlowConveyor properties available in property tables. Improvement: Extra FlowConveyor options added, such as virtual length support. Improvement: Compare Properties enabled for all active FloWorks objects. Improvement: Toolbox items "Level Triggered Event" and "Time Series" support disabled icon. Improvement: MassFlowConveyor supports stacked products. All bug fixes in FloWorks 22.0.4 below (please note the Known Issues information there). FloWorks 22.2.3 All bug fixes in FloWorks 22.0.5 below. FloWorks 22.2.2 (6 January 2023) All bug fixes in FloWorks 22.0.4 below. FloWorks 22.0.5 Bug fix: Content issues when using warmup time. Bug fix: Input and output trigger ammount issues when using warmup time. Bug fix: Solver crashed with (large) networks that contains cycles. Improvement: Complete new solver mode added, that improves solver times. Improvement: OnEmpty and OnFull are now fired when setting the content using script or ProcessFlow activity. FloWorks 22.0.4 (6 January 2023) Bug fix: Solved FlexSim crashing when FlowControl had invalid references in member list. Bug fix: Legacy flow conveyors were (silently) failing in some cases. Bug fix: Flow Amount for ItemToFlow and FlowToItem can be set correctly. Bug fix: When copying an object it sometimes lost its Flow Control reference. Bug fix: Requesting statistics through FlowObject.stats raised an error. Bug fix: When setting flow content through code the state is now correctly updated. Improvement: Small wording fixes in the user manual. Improvement: Updated tutorials. Improvement: Updated several outdated or incorrect tooltips.

O link que segue leva a um vídeo no qual é apresentado um exemplo de modelagem utilizando-se o módulo FloWorks FlexSim. No vídeo, modela-se um processo de fabricação de Suco de Laranja, desde sua extração até seu envase. Recursos do FloWorks utilizados no vídeo: ItemToFlow: Extração do suco FlowPipe: Transporte do fluido FlowTank: Armazenamento FlowMixer: Processo de mistura de conservantes Vídeo Tutorial: FloWorks Exemplo de Modelagem Esperamos que aproveitem mais este vídeo tutorial.

O link que segue leva a um vídeo no qual é apresentada uma Visão Geral sobre o módulo FloWorks FlexSim. Os tópicos abordados no vídeo são: O que é o FloWorks? Qual a aplicação do módulo FloWorks? Qual a diferença entre FloWorks e o módulo de Fluidos? Quais os principais objetos da biblioteca FloWorks? Algumas propriedades interessantes do Módulo. Vídeo Tutorial: FloWorks Overview Esperamos que aproveitem mais este vídeo tutorial.

FloWorks 22.0.0 is now available (21 December 2021). This version of FloWorks is intended for use with FlexSim 2022. If you are using FloWorks with FlexSim 2021 (LTS) you can upgrade to FloWorks version 21.0.5. If you are using FlexSim 2021 Update 2, you can upgrade to FloWorks version 21.2.1. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV ( talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes FloWorks 22.0.0 Fixed and updated statistics pins. Tutorials revised and updated (thanks, @Clair!). All bug fixes in FloWorks 21.2.1 below. All bug fixes in FloWorks 21.0.5 below. FloWorks 21.2.1 New: (segmented) flow pipe has option to suppress "Product Out Changed" event from product 0 to initial product. Bug fix: changed wording in tutorial 2 so it can be completed again. Bug fix: FlowVessel and FlowTruck flow item issues fixed All bug fixes in FloWorks 21.0.5 below. Backwards Compatibility Note: The following change may change the way updated models behave. (Segmented) flow pipe no longer fires the "Product Out Changed" event for zero-width layers (e.g. as created by the Pass Product Downstream trigger). FloWorks 21.0.5 Bug fix: when impact event ends, when no recalculation is necessary, the flow object state is now re-determined. Bug fix: SetFlowConveyorSpeed function fixed. Bug fixes to solver: incorrect flow with full tank-type objects. Bug fix: FlowConveyor approximately full/empty issues fixed. Bug fix: FlowConveyor settings (width, speed, ...) could not be set in quick properties.

Update June 27, 2017: Upgrade versions FloWorks 17.1.2 and FloWorks 17.0.5 are now available. These releases resolve an incompatibility that may result in errors on starting FlexSim when you install FloWorks in combination with certain other modules. If you want to use the (beta version of) the Emulation module, for example, you should upgrade FloWorks to this latest version. There are no functional changes. If you are using the LTS version (17.0.5) of FlexSim you should upgrade to FloWorks 17.0.5. Download FloWorks 17.1.2 if you are using FlexSim 2017 Update 1 (FlexSim 17.1.2). Both versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Bugs may be reported to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV ( talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license. For any questions, please email support@talumis.com. Release notes From FloWorks 17.0.4 to 17.0.5, and from FloWorks 17.1.1 to 17.1.2: Bug fix: Fixed errors when loading FloWorks with other modules dependent on Process Flow, such as the Emulation module. From FloWorks 17.0.3 to 17.0.4, and from FloWorks 17.1.0 to 17.1.1: The following bug fixes and usability improvements are available in both versions: Bug fix: Flow Conveyor with multiple inputs sometimes created too many update events. Bug fix: Flow Conveyor now allows input port at end of conveyor. Usability improvement: Pick list options updated to dot syntax, e.g. centerobject(current, 1) is now current.centerObjects[1]. Usability improvement: Changed object list dropdown to be more descriptive about input, output and center connections. Usability improvement: Changed input/output amount trigger template to increase current input/output instead of previous trigger amount Usability improvement: Added FloWorks options to User Event code dropdown. The following bug fixes apply to version 17.1.1 (FlexSim 2017 Update 1) only. Bug fix: Fixed exception when changing to first product of product table using scripting (thanks to Julio for reporting it) (product table is only available in FloWorks 17.1). Bug fix: Flow To Item releases item when pulling object downstream is unblocked (Bug was only present in FlexSim 17.1). Bug fix: Flow To Item now uses item.Type labels instead of deprecated setitemtype (getitemtype/setitemtype was deprecated in FlexSim 17.1). The release notes of older versions of FloWorks can be found here.

UPDATE (January 22, 2021): FloWorks 20.0.5 is now available. Except for critical bug fixes, this is likely to be the final bug fix release for FloWorks 2020. Please consider upgrading to FlexSim & FloWorks 2021. UPDATE (December 23, 2020): FloWorks 20.0.4 is now available. UPDATE (June 15, 2020): FloWorks 20.1.2 is now available. UPDATE (February 4, 2020): FloWorks 20.0.1 is now available. FloWorks 20.0.0 is now available (16 December 2019). This version of FloWorks is intended for use with FlexSim 2020. If you are using FloWorks with FlexSim 2019 LTS, please use FloWorks version 19.0.8. If you are using FlexSim 2019 Update 2, please use FloWorks version 19.2.2. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV ( talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes FloWorks 20.1.3 (20 August 2020) All bug fixes included in FloWorks 20.0.2 below. FloWorks 20.1.2 (15 June 2020) Bug fix: Fixed exception in release of Flow To Item. Bug fix: Removed internal output to console. Bug fix: Removed redundant license check in old solver. FloWorks 20.1.1 (23 April 2020) Bug fix: Update script for FloWorks Custom Action activities. Bug fix / improvement: Library grid updated. FloWorks 20.1.0 (17 April 2020) Release for FlexSim 2020 Update 1. FloWorks 20.0.5 Bug fix: All products shown as black in some cases where product color table was broken. Bug fix: Items would sometimes not exit from previously blocked Item To Flow. Bug fix: Network solver gave incorrect result in some models using output ratios. FloWorks 20.0.4 Bug fix: Flow conveyor sometimes lags because of unnecessarily many content blocks. Bug fix: Removed redundant license check in model limit panel. Backwards Compatibility Note: The following change may change the way updated models behave. Bug fix: Several issues in the network flow calculation resolved. Bug fix: Flow pipe passes name instead of product ID in first On Product Out Change after reset. FloWorks 20.0.3 (02 September 2020) Bug fix: Input / output triggers were sometimes scheduled at infinity. FloWorks 20.0.2 (20 August 2020) Bug fix: Set content activity uses FlowTank in code header. Added "Max. content" option to picklist. Bug fix: Process Flow activity did not correctly set relative output trigger amount. Bug fix: Flow item tank reset content at end of warmup. Bug fix: Adding Process Flow activity created module dependency. Bug fix: Documentation for flow processor updated. Bug fix: Update script for FloWorks Custom Action activities. Bug fix / improvement: Library grid updated. Bug fix: Fixed exception in release of Flow To Item. Bug fix: Removed internal output to console. Bug fix: Removed redundant license check in old solver. FloWorks 20.0.1 (04 February 2020) Bug fix: Fixed incorrect berth configurations. Bug fix: Removed popup during startup. Bug fix: MODE_RESTART_FALLING was sometimes incorrectly #define d the same as MODE_RESTART_RISING . Bug fix: Several bug fixes and improved stability for the new (beta) solver. Documentation: updated Tank trigger levels description. FloWorks 20.0.0 (13 December 2019) Feature: Added Process Flow activities for FloWorks. Feature: Added Process Flow templates for Basic Berth and Tank Pool. User request: Added option not to checkout FloWorks license. Bug fix: Removed inconsistent behavior after (de)activating license. Bug fix: Tank level trigger could cause event list to become unsorted. Bug fix: Max. Object Depth setting in FloWorks charts was ignored.

FloWorks 18.1.0 is now available (10 April 2018). This version of FloWorks is intended for use with FlexSim 2018 Update 1. Update: Bug fix version 18.1.1 has been released on 18 April. In addition, FloWorks 18.0.2 has been released, containing bug fixes for FlexSim 2018 (LTS) users. All versions can be found in the Downloads section of your FlexSim account on the 3rd party modules tab. Please do not hesitate to report any bugs, usability improvements and feature requests to support@talumis.com. About FloWorks FloWorks is a 3rd party module developed and maintained by Talumis BV ( talumis.com). It provides faster and more accurate modelling and calculation of fluid systems than the default FlexSim fluid library. It is especially useful within the oil, gas, and bulk industry both for production and supply chain optimization. This module requires a FloWorks license with active maintenance. For any questions, please email support@talumis.com. Release notes Changes in FloWorks 18.1.1 Bug fix: "Change" field should be hidden on all Task Executers except Flow Task Execture. Bug fix: Changing configuration of Flow Task Executer would cause strange behavior because the window was closed before all scripts had finished executing. Bug fix: Some objects like Berth and Loading Arm no longer worked because code properties got untoggled. Changes in FloWorks 18.1.0 Pumps, valves, blenders and splitters are now different shapes of the same "Flow Processor". Truck loading points and Berths are now different shapes of the same "Loading Point". Cylindrical tanks, rectangular tanks, tanks with polygon base area and flow piles are now different shapes of the same "Flow Tank". Added button to flow tank to calculate physical size based on specified max. content. Flow pipe has animation to help visualize if material is flowing and how fast. Added post-step delay and trigger to multi-compartment loading controller steps. Added Start Impact Event and End Impact Event triggers. FloWorks chart templates have been added to the library. All changes to version 18.0.2 listed below. Changes in FloWorks 18.0.2 (for FlexSim 2018 LTS) Bug fix: Conveyor sometimes stops incorrectly. Improvement: Objects try to avoid On State Change when state has not changed.