You should have already completed all preceding steps found in the article Hosting your FlexSim licenses with lmtools, including all those under the headings "Preparation and Prerequisites" and "Activate licenses to your license server". At this point you're ready to install, configure, and start the service that will serve your FlexSim licenses.   Create the service Configure service permissions Start the service Check the service status Troubleshooting problems with the service   Create the service   We'll use lmtools to create your new licensing service.   On your license server, in your extracted download folder of FlexSim license server materials, right-click lmtools.exe and choose Run as administrator. Go to the Config Services tab. Create a new licensing service by typing FlexSim_License into the Service Name input field. The Service Name field looks like a dropdown selector, but you can click in it to type a new name. Use the 3 Browse buttons to specify the paths to files (lmgrd.exe, flexsim.lic, log.log) that are also included with the FlexSim license server materials. Check the boxes for Use Services and Start Server at Power Up. Press the Save Service button in the upper right. Confirm the save by choosing Yes. You may receive an error message regarding "Windows preferred path". This is normal and this message can be safely ignored.   Configure service permissions   Your new FlexSim_License service needs permissions set to function properly.   Click the Windows Start button or press the Windows key, then type “Services” into the search box in the Start menu, and press Enter. Windows will search for and open Windows Services Manager. Find FlexSim_License in the list of services. If it is missing from the list, see the section Troubleshooting the licensing service below. Open the FlexSim_License service’s Properties window by double-clicking its name. Go to the Log On tab. Choose the option to Log on as: Local System account. Press OK to close the FlexSim_License Properties window.   Start the service   While still in Windows Services Manager, use the Start link to start your new FlexSim_License service.     You should see a status bar showing the startup progress. The service usually starts in under a minute.   If there are any errors or other problems with starting the service, skip to the section Troubleshooting problems with the service.   Check the service status   After the service is started, head back to lmtools to check the log. You can view the service log from the Config Services tab, press the View Log... button, located toward the lower right of the Config Services panel.   You should find the following information in your log file:     lmgrd.exe is listening on port 26914. This is the port the licensing service will use when listening for client PC communication. The bootstrap license file flexsim.lic was found and loaded. (This is not a license file specific to you and does not contain your license info. FlexSim licenses use Trusted Storage and licenses are activated to your license server using flexsimserveractutil.exe). The flexsim.opt Options file was found and loaded. A list of product features activated in your server's Trusted Storage. Your feature set may differ somewhat from this example, depending on your license and product, but you should see several of the features above. 900 seconds is the minimum timeout allowed by FlexNet, and we configure our installation to use this minimum value using the options file. The flexsim.exe vendor daemon is using port 56914.   To close the log, press the Close Log button, toward the lower right of the Config Services panel in lmtools.   Troubleshooting problems with the service   Did everything work? If not, perhaps you have one of these issues:   The FlexSim_License service is not listed as an installed service in Windows’ services. The FlexSim_License service does not start manually. The FlexSim_License service does not start up automatically when the computer restarts.   If any of these apply to you, please check the following:   You ran lmtools as a user with admin rights, and right clicked the program to choose Run as Administrator. On the Config Services tab, you checked the boxes Use Services and Start Server at Power Up. There isn’t already a process running or service installed named FlexSim_License. lmgrd.exe, flexsim.exe, and all other files downloaded together with them are in the same folder, and in a file path that does not contain any folder named “FlexSim” (case insensitive). The FlexSim_License service must run as an account with proper permissions. It’s possible that the Local System Account setting specified in Configure service permissions above does not have adequate permissions, and you will need to specify the service to run under a different account. Work with your server administrator or IT department to determine an account with the proper permissions to run your license service. You could have a port conflict, where one or both of the ports specified in your flexsim.lic license file are in use by another service on your license server. Check the section Resolving port conflicts. Some anti-virus solutions prevent unrecognized services from running or accessing necessary functionality. If your license service won't start, try temporarily disabling any anti-virus solution installed on your license server. If this fixes the issue, work with your IT administrator to modify your anti-virus settings. Remember to reactivate your anti-virus software after this experiment.  

Introduction to lmtools   This article is a sort of table of contents to the various articles that will take you from start to finish in installing, licensing, configuring, and running your FlexSim license server using the lmtools license manager.   background info   Server-based vs Standalone licensing - Learn the differences between these two license models, and when you might choose one over the other. License managers - lmadmin vs lmtools - FlexSim supports these two FlexNet license managers. Learn the differences, and why FlexSim recommends lmtools.   Let's get started   When installing a new license server, start here at the top and work your way down the list of articles linked below. By the end you should be in good shape to properly host and serve your FlexSim licenses.   Each link should open in its own browser tab, so once you complete a sub-task just close that tab. Then back here in this main tab click the link to the next step.   The list of links below might seem intimidating, but conceptually it's just 4 main things we're about to work through:   Preparation and Prerequisites Activate licenses to your license server Configure the licensing service Configure client PCs   If you run into any problems, you can also find additional helpful resources linked at the end of this article:   Troubleshooting Related links     1) Preparation and Prerequisites   System Requirements - almost any Windows computer could act as your license server. Click inside for the details. Download files - download the required lmtools files and extract them to an appropriate folder on your license server. FlexNet Licensing Service 64 - FlexSim is licensed using Revenera's industry-standard FlexNet licensing platform. This article prepares your license server with the background service necessary for hosting your FlexSim licenses.   2) Activate licenses to your license server   Choose the right steps below to license your server, depending on whether or not your license server can communicate over the internet directly with FlexSim's main license server.   • Online, Internet-enabled systems   License Server - Activation - Online - Activate your FlexSim licenses to your license server directly over the Internet. Should be easy-peasy. • Secure / Offline / Air-gapped systems   If your license server will not connect to the Internet (or if for any reason it cannot communicate with FlexSim's license servers) there are a few extra steps to get up and running. You've got this!   Configure Trusted Storage - Your new license server has a secure storage area for holding license info, but first it must authenticate with FlexSim's main license server. License Server - Activation - XML / Offline - the manual steps to activate your FlexSim licenses onto your license server.   3) Configure the licensing service   Configure your license service - use FlexNet's lmtools license manager to create and configure the service that will serve up your FlexSim seats. Add Windows Firewall exceptions - your licensing service needs to communicate with other PCs on the network. This will get you started.   4) Configure client PCs   With your license server installed and configured, it's finally time for your license server to fulfill its destiny and serve licenses to your client PCs.   Make sure you know the IP address or fully qualified domain name for your license server, as well as the license service port number (see #1 under Check the service status). You'll use your server's address/name and service port when configuring the client PCs.   FlexSim Version Numbering - your FlexSim license is for a particular version of FlexSim. If your software maintenance is not current, you may need to use an older version of the software. In this article you'll learn how licensing works for a given version number and where to download an appropriate version of FlexSim that will work with your license. With an appropriate version of FlexSim installed on the client PCs, you're ready to configure them to communicate with your license server. There are two ways a client PC can be configured. Choose the method below that most closely matches the main use case for your client PC:  Single-user client PCs - this method configures settings that are saved on a per-user basis. Multi-user client PCs - usually appropriate for a university computer lab or other shared-PC situation, where the configuration should be computer-based. Verify client PC licensing - Not sure if your client PC is getting licensed properly? Dive in to find out how to tell your client PC is successfully getting a license from your new license server   Troubleshooting   Isn't there a law in the universe that if something can go wrong, it will? If you're stuck in a licensing black hole, these tips might be just the thing to help you get moving.   Client/server connectivity - if the client PC and the license server can't communicate, the client PC won't be able to get a license. Troubleshooting tips - when you're pretty certain that connectivity isn't an issue, but your client PC still isn't getting a license, check here for some ideas.   Related Links   FlexSim's license file - your new licensing service uses a license file to specify port numbers. Get more background on license files and ports here.  

The instructions below are for offline/Manual XML licensing. If your server successfully connects to the Internet and to FlexSim's main license server, you can try our simpler online license activation instructions. Getting ready If you're configuring a new license server, please stop now and follow the complete license server installation instructions. This shorter guide just focuses on one piece of the installation instructions: license activation. We've broken the activation step out into this standalone article for convenience in subsequent licensing procedures, like upgrading your license server. These instructions assume that: you followed the steps outlined in our license server installation instructions including download of all required files and installation of the FlexNet Licensing Service; FlexSim's license server files were extracted to the location C:\FlexSim_LMTOOLS. When should I use XML/offline licensing? If your license server cannot connect to the Internet or is blocked from direct communication with FlexSim's license activation servers then you will need to activate your license manually . This article guides you through the manual activation steps. If you're not sure, go ahead and try an online activation first. Activating your license server online is faster and simpler. If online activation fails due to communications on your license server being blocked, you can fall back to this offline activation guide. Activate your license NOTE: If this is the first time a license has been activated to this license server you must first configure trusted storage. On your license server, run the flexsimserveractutil.exe program (C:\FlexSim_LMTOOLS\flexsimserveractutil\flexsimserveractutil.exe) by right-clicking and selecting Run as Administrator. Create manual activation requests In the FlexSim ServerActUtil program, go to Tools > Manual Activation > Generate Request. Enter a valid Activation ID. Enter a Count (seat quantity) for your license. NOTE: If you have a 20-seat license but want to host 12 seats on this server and 8 seats somewhere else, you can do so. Simply enter 12 for the Count value. Browse to select an Output File. Press Generate. You've just saved a new XML activation request to the location you selected. Repeat steps 1-5 above to generate an activation request for all license codes you intend to activate on this license server. Submit your manual activation requests Transfer your XML activation requests to a computer with Internet access. From your Internet-connected computer, open a web browser and login to your FlexSim Account. Click the Licenses link in the header, then choose Manual XML in the Licenses submenu. Upload your XML files by dragging them onto the drop zone. Your uploaded XML requests will be processed. Upon completion, you will be prompted to download each XML response. Process your manual activation responses Transfer your downloaded XML activation responses to the offline license server you are licensing. In the FlexSim ServerActUtil program, go to Tools > Manual Activation > Process Response. Browse to an XML activation response file. Press Process. FlexSim should give you an indication of successful processing of your activation, and activation for that XML request will be complete. Successfully Processed Response Repeat steps 1-5 to process the XML activation responses for any other XML activation requests. Is this a license server upgrade? If this license activation is part of upgrading the license on your license server, don't forget to reread license files. If you have any questions or problems, please search our Answers Community for possible solutions. There is a good chance someone else has already asked your question. Still not finding what you're looking for? Submit a new question and we'll check it out. If you're including any confidential information, such as license codes, be sure to mark your question as private! You can also contact your local FlexSim distributor for live phone, web, or email help.

The instructions below are for Internet-connected license servers.   If your server cannot connect to the Internet or to FlexSim's main license server, try our offline/Manual XML license activation instructions.   Getting ready   If you're configuring a new license server, please stop now and follow the complete license server installation instructions.   This shorter guide just focuses on one piece of the installation instructions: license activation. We've broken the activation step out into this standalone article for convenience in subsequent licensing procedures, like upgrading your license server.   These instructions assume that:   you followed the steps outlined in our license server installation instructions including download of all required files and installation of the FlexNet Licensing Service; FlexSim's license server files were extracted to the location C:\FlexSim_LMTOOLS.   Online vs XML/offline licensing   Online activation is faster and easier, so if your license server connects to the Internet, follow the instructions below to activate your seats to your server. If your server is not connected to the Internet, or communication with FlexSim's servers is blocked, you can try the offline/XML activation method.   Endpoints, protocols, firewalls   When your license server activates a license over the the Internet the FlexSim server activation utility communicates with one or more of the following FlexSim servers via HTTP (port 80) and HTTPS (port 443):   www.flexsim.com sw.flexsim.com sw1.flexsim.com license.flexsim.com   Your license server should be able to communicate across the Internet with these addresses in order to successfully activate your licenses online.   Activate your license   On your license server, run the flexsimserveractutil.exe program (C:\FlexSim_LMTOOLS\flexsimserveractutil\flexsimserveractutil.exe) by right-clicking and selecting Run as Administrator.     In the FlexSim ServerActUtil program, go to Connect > Activate.     Enter the Activation ID and Count (seat quantity) for your license.   NOTE: If you have a 20-seat license but want to host 12 seats on this server and 8 seats somewhere else, you can do so. Simply enter 12 for the Count value.   Press Activate.   After a few seconds, and several status messages, you should receive an indication of success.     Repeat the steps above to activate any other license codes you are hosting on this license server.   Reread license files   If this license activation follows a license return, either as part of upgrading the license on your license server or some other procedure, don't forget to reread license files.   If you have any questions or problems, please search our Answers Community for possible solutions. There is a good chance someone else has already asked your question. Still not finding what you're looking for? Submit a new question and we'll check it out. If you're including any confidential information, such as license codes, be sure to mark your question as private! You can also contact your local FlexSim distributor for live phone, web, or email help.