You may find it necessary to check the status of your licenses. Perhaps you're trying to diagnose some issue, or you want to check which license you have activated.   Here we explain how to view the licenses activated to your PC, and their status.   View your licenses   Open FlexSim. From the main menu, go to Help > License Activation. Go to the View Licenses tab. Press the View Licenses button. You should see a list of fulfillment information, or a message indicating that there are no licenses on your PC.   What does it all mean?   If you have licenses on your PC, each license listed includes a block with status and license info, including whether the license is fully trusted and enabled or broken, the unique fulfillment ID that pertains to this specific license activation, and more. You'll also see INCREMENT blocks for each feature that makes up your license.   Take action   Check the article Licensing Procedures under the Standalone Licensing heading for instructions if you need to repair or return your license or do other sorts of license maintenance.

You may find occasion to check the status of your licenses. Perhaps you're trying to diagnose some issue, or you want to check which license is activated, or how many seats. Here we explain how to view the licenses activated to your license server, and their status. Assumed configurations All steps below assume that you followed the installation instructions as described in our license server installation instructions, and that all FlexSim's license server files were extracted to the location C:\FlexSim_LMTOOLS. Throughout these instructions we will reference files inside that folder. View License Rights On your license server, run the flexsimserveractutil.exe program (C:\FlexSim_LMTOOLS\flexsimserveractutil\flexsimserveractutil.exe) by right-clicking and selecting Run as Administrator. In the FlexSim ServerActUtil program, go to Tools > View License Rights. An information block is printed for each license activated to your license server. You will find listed the unique fulfillment ID for each activation, along with the license code (also called an activation ID and listed here as entitlement ID), its status (fully trusted/enabled, broken, etc.), the number of seats activated, and for timed licenses, an expiration date. Take Action Check the article Licensing Procedures under the Network Licensing heading for instructions if you need to repair or return your license or do any other sort of license maintenance.

Preparation   You may want to brush up on how a license version is related to a product version.   When you understand what version of FlexSim will work with your license, download and install an appropriate software version for your license.   If your computer is not connected to the Internet, you will need to transfer FlexSim's installer to your computer on a USB drive or some other method.   You will also need to be able to transfer XML license files to and from your offline computer.   NOTE: If this is the first time a license has been activated on this computer, an initial XML request/response communication will be needed to configure your local Trusted Storage.   This means that for a first ever license activation on a given computer, complete the steps below for just a single Activation ID - that will configure your computer's Trusted Storage.   Once that is complete, repeat again the entire Manual XML activation process for that initial Activation ID and any other Activation IDs that will be installed to this computer.   Find your licenses   Log in to your FlexSim Account, click the Licenses link in the top menu. In the Licenses submenu, choose List. Expand the various product and version folders to find the Activation ID you wish to activate. An Activation ID looks similar to this example: yourcompany.com01-ABCDE-FGHIJ-KLMNO-FSENT16.2   Create manual activation requests   Open FlexSim Software. In FlexSim's main menu, Go to Help > License Activation. Click the Advanced tab. Go to the Manual Activation sub-tab. Enter a valid Activation ID into the field (see the Find your licenses heading, above). Click the Generate Request button. You will be prompted to save an XML file. Choose a location and filename to save your XML activation request. If this is your first time ever activating any FlexSim licenses on this PC, only generate an XML request for one activation ID (see red-highlighted note above). Otherwise, repeat steps 4-6 for all licenses you wish to activate on this PC, so that all your XML activation request files can be transferred at one time.   Submit your manual activation requests   Transfer your XML activation requests to a computer with Internet access. From your Internet-connected computer, open a web browser and login to your FlexSim Account. Click the Licenses link in the header, then choose Manual XML in the Licenses submenu. Upload your XML files by dragging them onto the drop zone. Your uploaded XML requests will be processed. Upon completion, you will be prompted to download each XML response.   Process your manual activation responses   Transfer your downloaded XML activation responses to the offline computer you are licensing. In FlexSim, using the same licensing interface where you generated your request, click the Process Response button. Browse to an XML activation response file. FlexSim should give you an indication of successful processing of your activation, and your activation will be complete. Repeat to process the XML activation responses for any other licenses you are manually activating.   IMPORTANT NOTE   If this is the first time a license has been activated on this computer, an initial request/response communication will only serve to configure your local Trusted Storage.   This means that for a first ever license activation on a given computer, after this first request/response has been successfully processed on the offline computer, a 2nd request using the same license code will need to be generated/uploaded/processed/downloaded/processed to fully activate your license.   This is a one-time event per-computer. Subsequent license activations to the same system require only one request/response XML pair. If you have any questions or problems, please search our Community for possible solutions. There is a good chance someone else has already asked your question.   Still not finding what you're looking for? Licensed users can submit a support request and we'll check it out.

Introduction to lmtools   This article is a sort of table of contents to the various articles that will take you from start to finish in installing, licensing, configuring, and running your FlexSim license server using the lmtools license manager.   background info   Server-based vs Standalone licensing - Learn the differences between these two license models, and when you might choose one over the other. License managers - lmadmin vs lmtools - FlexSim supports these two FlexNet license managers. Learn the differences, and why FlexSim recommends lmtools.   Let's get started   When installing a new license server, start here at the top and work your way down the list of articles linked below. By the end you should be in good shape to properly host and serve your FlexSim licenses.   Each link should open in its own browser tab, so once you complete a sub-task just close that tab. Then back here in this main tab click the link to the next step.   The list of links below might seem intimidating, but conceptually it's just 4 main things we're about to work through:   Preparation and Prerequisites Activate licenses to your license server Configure the licensing service Configure client PCs   If you run into any problems, you can also find additional helpful resources linked at the end of this article:   Troubleshooting Related links     1) Preparation and Prerequisites   System Requirements - almost any Windows computer could act as your license server. Click inside for the details. Download files - download the required lmtools files and extract them to an appropriate folder on your license server. FlexNet Licensing Service 64 - FlexSim is licensed using Revenera's industry-standard FlexNet licensing platform. This article prepares your license server with the background service necessary for hosting your FlexSim licenses.   2) Activate licenses to your license server   Choose the right steps below to license your server, depending on whether or not your license server can communicate over the internet directly with FlexSim's main license server.   • Online, Internet-enabled systems   License Server - Activation - Online - Activate your FlexSim licenses to your license server directly over the Internet. Should be easy-peasy. • Secure / Offline / Air-gapped systems   If your license server will not connect to the Internet (or if for any reason it cannot communicate with FlexSim's license servers) there are a few extra steps to get up and running. You've got this!   Configure Trusted Storage - Your new license server has a secure storage area for holding license info, but first it must authenticate with FlexSim's main license server. License Server - Activation - XML / Offline - the manual steps to activate your FlexSim licenses onto your license server.   3) Configure the licensing service   Configure your license service - use FlexNet's lmtools license manager to create and configure the service that will serve up your FlexSim seats. Add Windows Firewall exceptions - your licensing service needs to communicate with other PCs on the network. This will get you started.   4) Configure client PCs   With your license server installed and configured, it's finally time for your license server to fulfill its destiny and serve licenses to your client PCs.   Make sure you know the IP address or fully qualified domain name for your license server, as well as the license service port number (see #1 under Check the service status). You'll use your server's address/name and service port when configuring the client PCs.   FlexSim Version Numbering - your FlexSim license is for a particular version of FlexSim. If your software maintenance is not current, you may need to use an older version of the software. In this article you'll learn how licensing works for a given version number and where to download an appropriate version of FlexSim that will work with your license. With an appropriate version of FlexSim installed on the client PCs, you're ready to configure them to communicate with your license server. There are two ways a client PC can be configured. Choose the method below that most closely matches the main use case for your client PC:  Single-user client PCs - this method configures settings that are saved on a per-user basis. Multi-user client PCs - usually appropriate for a university computer lab or other shared-PC situation, where the configuration should be computer-based. Verify client PC licensing - Not sure if your client PC is getting licensed properly? Dive in to find out how to tell your client PC is successfully getting a license from your new license server   Troubleshooting   Isn't there a law in the universe that if something can go wrong, it will? If you're stuck in a licensing black hole, these tips might be just the thing to help you get moving.   Client/server connectivity - if the client PC and the license server can't communicate, the client PC won't be able to get a license. Troubleshooting tips - when you're pretty certain that connectivity isn't an issue, but your client PC still isn't getting a license, check here for some ideas.   Related Links   FlexSim's license file - your new licensing service uses a license file to specify port numbers. Get more background on license files and ports here.  

Assumed configurations   All steps below assume that you followed the installation instructions as described in our license server installation instructions, and that all FlexSim's license server files were extracted to the location C:\FlexSim_LMTOOLS. Throughout these instructions we will reference files inside that folder.   Reread the license   Within your FlexSim_LMTOOLS folder, right-click lmtools.exe and choose Run as administrator. You may need to accept a permissions prompt. Go to the Start/Stop/Reread tab. Choose the FlexNet License service for your FlexSim licenses. The name of the service could be FlexSim_License, but the service could have been given a different name. Press the ReRead License File button. Close lmtools.

Remembering the proper credentials To log in to lmadmin's Administration area you need know the port number your license server manager is hosting on and your lmadmin admin password. lmadmin's default port number for serving its web-based user interface is 8090. There is a very good chance that your system is hosting lmadmin on its default port. On your license server, open a browser and go to http://127.0.0.1:8090 to see if this will open lmadmin's web-based interface. The default login information for lmadmin's Adminstration area is username admin and password admin. Upon your first logging in to the Administration area you would have been prompted to create your own new password consisting of at least 8 characters. If you have forgotten either the port number or your admin password, there is unfortunately no way to recover these. You will need to uninstall, then reinstall lmadmin. If you do not wish to do so at this time, you should be able to start serving your upgraded FlexSim licenses by restarting the lmadmin64 Windows service. Logging in to lmadmin Use a web browser to connect to the lmadmin service at https://127.0.0.1:8090 (specify a different custom port besides 8090, as necessary). The FLEXnet Publisher interface should open. Click on Administration to sign in. After logging in to the Administration portal, click the Vendor Daemon Configuration tab on the bottom left. Click on the flexsim daemon. Reread the license If there is a Start button, that means that your flexsim vendor daemon is currently stopped. Press the Start button to start the vendor daemon using your upgraded licenses. If there is a Reread License Files button, that means that your flexsim vendor daemon is currently running, and serving the old licenses. Press the Reread License Files to start serving your newly activated and upgraded licenses.

Introduction Several times per year we release a new feature-version of FlexSim Simulation Software. In order for your PCs to be able to run a licensed version of the upgraded software, you'll need to upgrade your standalone FlexSim license. Licenses with a current maintenance subscription are eligible to be upgraded to the new version. If you don't understand how licensing works for different FlexSim versions, please review our Answers article FlexSim Version Numbering. Overview After installing your new version of FlexSim, there are 3 main steps to upgrading your standalone license: Return the licenses you intend to upgrade Upgrade your licenses Activate the upgraded license Several of these steps have their own fully documented procedures. We'll link you to those resources below. 1. Return the licenses you intend to upgrade The steps to return a standalone license are fully documented. Choose the link below that best matches your needs, depending on whether your PC can connect to the Internet: Standalone - Return - Online Standalone - Return - XML / Offline Be sure to return ALL licenses you wish to upgrade. 2. Upgrade your licenses NOTE: Licenses with expired maintenance will not upgrade. Timed licenses do not upgrade. Only permanent (not timed) licenses under current maintenance can be upgraded. Log in to your FlexSim Account. If you were already logged in to your FlexSim Account, in the top navigation menu hover over your initials icon and choose Reload Account. Now in the top navigation menu, choose Licenses > List. Check that the available seat count is equal to the total. All of a license’s seats should be returned for it to upgrade. Click on the Upgrade Licenses button. If you have several licenses to upgrade and all are owned by or shared with your FlexSim Account, they will all be upgraded at once. Please be patient while the upgrade process works in the background. When the page refreshes, eligible licenses will have a new activation ID for the latest version of the software. Your license code indicates its version at the end of the code to help you know what versions your license will properly activate. Review license code format. You'll be able to use the upgraded license codes in the next step. 3. Activate the upgraded licenses The steps to activate a standalone license are fully documented. Choose the link below that best matches your needs, depending on whether your PC can connect to the Internet: Standalone - Activation - Online Standalone - Activation - XML / Offline If you have any questions or problems, please search our Answers Community for possible solutions. There is a good chance someone else has already asked your question. Still not finding what you're looking for? Submit a new question and we'll check it out. If you're including any confidential information, such as license codes, be sure to mark your question as private! You can also contact your local FlexSim distributor for live phone, web, or email help.

Preparation   You will need to be able to transfer plaintext XML license files to and from your offline computer.   Create manual return requests   Open FlexSim Software. In FlexSim's main menu, Go to Help > License Activation. Click the Advanced tab. Go to the Manual Return sub-tab. Each of your activated licenses is listed in the dropdown selector. Select a license you want to return. Click the Generate Request button. You will be prompted to save an XML file. Choose a location and filename to save your XML return request. Repeat for all licenses you wish to return, so that all your XML return request files can be transferred at one time.   Submit your manual return requests   Transfer your XML return requests to a computer with Internet access. From your Internet-connected computer, open a web browser and login to your FlexSim Account. Click the Licenses link in your FlexSim Account's page header. Click the Manual XML link in the submenu. Upload your XML file by dragging it onto the drop zone, or click the drop zone and browse to your XML file. Your uploaded XML request will be processed. Upon completion, you will be prompted to download the XML response. Download the response XML file. Repeat for any licenses you are manually returning, so that all your XML return response files can be transferred back to your offline PC at one time.   Process your manual return responses   Transfer your downloaded XML return responses to the offline computer you are un-licensing. In FlexSim, using the same licensing interface where you generated your request, click the Process Response button. Browse to an XML return response file. FlexSim should give you an indication of successful processing of your return, and your return will be complete. Repeat to process the XML return responses for any other licenses you are manually returning.   If you have any questions or problems, please search our Answers Community for possible solutions. There is a good chance someone else has already asked your question. Still not finding what you're looking for? Submit a new question and we'll check it out. If you're including any confidential information, such as license codes, be sure to mark your question as private! You can also contact your local FlexSim distributor for live phone, web, or email help.