To go along with the launch of Flexsim 2018, we've put together a few sample models to show some of its features. Internet Cafe internetcafe.fsm This model shows off several of the new animations added to the Operator and Person flowitem. It also demonstrates how the Create Person activity can be used to attach a Person flowitem to an Instanced Process Flow. People with yellow shirts are attached to the ComputerUsers flow. They acquire a computer desk and then have an employee bring them over to their computer. Those in orange shirts are attached to the FoodCustomers flow. They buy drinks or snacks at the counter and then hang out at the tables. Casual Restaurant casualrestaurantredux.fsm Clinic clinic.fsm Grocery Store grocerystore.fsm Airport Security airportsecurity.fsm Bus Stop busstops.fsm

This model is a proof-of-concept example for combining FlexSim's GIS features with the power of mixed integer programming in python. The model simulates a distribution network of 'factories' (red icons) and 'warehouses' (blue icons). The factories produce the product you are selling, and then distribute the product to various warehouses in the network. Every day, each warehouse generates a random demand for the product. Once demand from each warehouse is known, the 'demand dispatcher' must determine which factory should produce and ship how much of the product to each warehouse, fulfilling all warehouses' demands at minimum total cost. Each factory has a maximum daily capacity of production and a per-unit cost of production. In addition, shipping costs must be taken into account from each factory to each warehouse. Given these factors and constraints, the problem of optimal dispatching boils down to the well-known min cost flow problem in optimization. I've created a simple python script that uses cvxpy to solve this min cost flow problem as a mixed integer program. The MIP is not exactly the same as the standard min cost flow problem, since total factory capacity may be more than total warehouse demand, and I'm using integer instead of continuous variables. Nevertheless, it is sufficient to demonstrate the capability. The Warehouse process flow generates daily demand for each warehouse and pushes it to a shared Demand list. The DemandDispatcher then pulls demand from the list, and marshals capacity, demand, and cost data into parameters that can be passed to python. Then it evaluates getMinCostFlow label on the process flow, passing those parameters in. The label is configured to connect to the getMinCostFlow function defined in the MinCostFlow.py module. This function formulates the MIP with cvxpy, solves the program, and then returns the optimal shipping quantities for each factory-warehouse pair, returning control back to FlexSim. Once the shipping quantities have been resolved, the DemandDispatcher process flow creates and labels 'Trucks' that are sent to each warehouse. Note that this travel mechanism is purely for animation purposes, letting you visualize how much product is being sent from factories to warehouses each day. Potential additions to this model could use inventory management strategies, simulating randomized lead times, etc. I've added several dashboards that show the cumulative average breakout for each warehouse of which factories supply that warehouse, as well as the cumulative average breakout for each factory of which warehouses that factory supplies. I've also added costing measures for the warehouses and factories. Some interesting insights that can be gleaned from this model are how shipping vs. production costs affect the balance of which factories will ship to which warehouses. For example, if your shipping costs are low relative to your production costs, then the min cost flow algorithm will push production to factories that are the lowest cost to produce, even if they are far away from the destination warehouse. High production cost factories are consequently relegated to little if any production. However, if shipping costs are high, the algorithm will localize production to the factories nearest their respective warehouses. In order to run this model, you need python properly configured, including: Install one of these python versions: 3.7, 3.8, 3.9, 3.10 Install the cvxpy and cvxopt packages: python -m pip install cvxpy cvxopt Make sure the python directory is part of your PATH environment variable Configure your Global Preferences (the Code tab) to use the associated python version. This model was built in FlexSim 22.1. MinCostFlow.zip

Attached are three models that can be used to see the VR capabilities of FlexSim. oculus-warehouse-demo4.fsm (built with FlexSim 7.7) oculustouchdemo-6.fsm (built with FlexSim 17.1) The zombie production game was also updated for VR. These models were primarily designed and tested with the Oculus Rift, but they work with the HTC Vive as well. The HTC Vive requires a more powerful graphics card than the Oculus Rift does to achieve similar performance. You need to maintain 90+ frames per second (File > Global Preferences > Graphics > Show FPS Counter) in order to avoid judder with the HTC Vive. The Oculus Rift will remain smooth at 45 FPS or higher due to asynchronous spacewarp in their driver. In any model in 17.1, you can teleport around by pointing and pressing the Vive touch pads or Oculus Touch thumb sticks as buttons. The position where the thumb presses the button on the Vive or the direction that the thumb stick is rotated on the Oculus Touch will affect the direction you are looking when you teleport. This control scheme is similar to the Oculus Home controls. Moving via teleporting minimizes the motion sickness felt by users who are unaccustomed to VR. In the touch demo model, you can push buttons to release conveyor merge lanes, move operator figurines to change the operator assignments, and control the crane. The code that handles the touch inputs is in the ModelOnPreDraw user command. See VR model custom code for a version of the model with more comments in the code. The warehouse demo model was built in 2015 and doesn’t have any interactive elements that work with the Oculus Touch or HTC Vive controllers. For optimal tracking, after you press the VR Mode button in FlexSim and put on the headset, make sure you recenter the headset in the VR settings while standing or sitting in the middle of your play area and looking straight forward. On the Vive, push the system button to open the Steam VR overlay, then press the Settings button near the bottom-right corner, then look straight forward and press the Reset Seated Position button. On the Oculus, press the Oculus home button and then press the Reset View in App button in the upper-right corner.

Example Usage of the New AutoCAD FlexScript API The following example models were demonstrated at the Autodesk University presentation Elevating Factory Design: FlexSim and the Future of Autodesk Fusion Digital Factory. Refer to that presentation for a demo of these models and additional discussion regarding the topics demonstrated by these examples. These examples require the Autodesk Interop FlexSim Module. Healthcare Auto-Build Example Demo_AutoCadAPI_ER_4.fsm Using the new AutoCAD FlexScript API, the data within dwg files can be read using FlexScript to automatically build simulation objects within the model. The script in this Healthcare example is contained in the AutoBuildFromDwg() user command in the Toolbox. This command reads the average location of blocks on the Bed Layer to create Bed Location objects. It also reads the lines on the Wall Layer to automatically create Wall objects and connect them to the A* Navigator for automatic pathfinding around the walls. Reading dwg data string filePath = param(1); AutoCAD.Database db = AutoCAD.Database(filePath); if (!db)             return -1; var iter = db.getBlockTable().getAt("*MODEL_SPACE").newIterator(); for (iter.start(); !iter.done(); iter.step()) {             var ent = iter.getEntity();             print("Entity:", ent.layer, ent.objectType);             if (ent.layer == "Bed Layer") {                         if (ent.is(AutoCAD.Polyline)) {                                     AutoCAD.Polyline polyline = ent.as(AutoCAD.Polyline);                         }             } } Creating a bed location treenode bedConfig = library().find("/people/Objects/Location>behaviour/eventfunctions/configs/Bed"); Object obj = Object.create("People::Location"); function_s(obj, "changeShape", bedConfig); Creating walls Object walls = Model.find("Walls"); if (walls) walls.destroy(); walls = Object.create("People::Walls"); treenode wallsSurrogate = walls.find(">visual/drawsurrogate"); Object libraryPillar = node("/?Pillar", library()); Object newPillar1 = createinstance(libraryPillar, wallsSurrogate); newPillar1.setLocation(0.0, 0.0, 0.0); Object newPillar2 = createinstance(libraryPillar, wallsSurrogate); newPillar2.setLocation(10.0, 0.0, 0.0); function_s(walls, "addWall", newPillar1, newPillar2); Asserting the A* Navigator, a Grid, and connecting Walls Object walls = Model.find("Walls"); Object aStarNavigator = model().find("AStarNavigator"); if (!aStarNavigator) {             aStarNavigator = createinstance(library().find("?AStarNavigator"), model()); } Object grid = aStarNavigator.find("Grid1"); if (!grid) {             grid = function_s(aStarNavigator, "createGrid", 0, 0, 0, 1, 1, 0);             grid.name = "Grid1"; } contextdragconnection(grid, walls, "A"); AGV Read/Write Dynamic Blocks Example POC_OHT_3_MoveOHB.fsm POC_OHT_3_MoveOHB.dwg (If this file is named differently when you download it from Answers, make sure you name it back to this exact name. It is referenced by name in the model.) The script in this AGV example is contained in the interopAutoCAD() user command in the Toolbox. This command reads the location and names of particular dynamic blocks in the dwg file in order to automatically create AGV path simulation objects based on the configuration of each type of dynamic block. Additionally, the script has examples of both reading data and writing data back to the dwg based on modifications of the AGV paths within the simulation. The script is only partially complete as a demonstration of the API’s capabilities; the script is not a fully-working, robust solution for any arbitrary dwg. Factory Design Utilities Proof of Concept Example Demo_AutoCadAPI_FDU_1.fsm This FDU example model contains many user commands in the Toolbox with various functionality. The primary example starts in the Load FDU Layout button’s OnPress code. By default, it calls the AutoBuildFromDwg() user command. Alternatively, it has unreachable example code for calling AutoBuildFromLayout(), which can read the layout data from an FDU LayoutData xml file rather than a dwg file. The AutoBuildFromDwg() user command reads factory-specific meta-data about each FDU block in the dwg file and automatically creates simulation objects for each. The simulation objects then load the custom 3D shapes from FDU representing each of those objects. The import script also sets labels with the various Factory properties from each object. Within the CreateSimulationObjects() and CreateInternalObjects() user commands—called from the CreateFactoryAssetInstance() command—are hard-coded checks for particularly factory asset family ids to determine what type of simulation objects to create. This is merely a proof-of-concept example for handling FDU assets via FlexScript without any changes to FDU assets themselves. Future enhancements may include options for including such simulation meta-data within FDU assets directly for a more robust, easier-to-use solution. This workflow brings all the new Autodesk interop features together for an exciting, new way to bring factory data into FlexSim. Once that data is in FlexSim, you can use its many existing features to analyze the system with live 3D animation and dashboard charts showing simulation results. You can validate the throughput of the layout, identify potential bottlenecks, and balance resource use.

As many of you have seen from our youtube video, we recently released an early beta version of a new FlexSim Agent module. This module can be downloaded from the Downloads section of your FlexSim account, under the Modules tab. Note that the Agent module will only work properly with FlexSim 20.1.1 or later. Here I'm posting some of the models I created and showed on the video. BasicProximitySystem.fsm TwoPhaseAGVSystem.fsm OnePhaseAGVSystem.fsm Boids.fsm AStarSystem.fsm RoomEvacuation.fsm HallwayTravel.fsm The AGV models aren't perfect (there's some tweaking needed, and there are some bugs that need to be fixed), put I'm putting them out there anyway. Since this is a beta version, I'm going to just upload unannounced module updates to the downloads section, so you can check the dates/versions on the downloads page against the version you have installed if you want to get the latest and greatest.

This small model shows how to batch various parts together to form 'valid' combinations as they become available. This differs from a regular combiner where the component quantities are set in advance of the components being accepted in the combiner (often based on the type of item on port 1 entry). The valid combinations are shown as the quantities required for a number of products in a global table "ProductPartQuantitiesGrid": By referencing the first picture and this table, you may be able to see that the model first constructs 4x Product2 followed by one product1 and a Product3. In the background process we are creating a token for each product which is then trying to pull all the parts needed while competing with the other products. This part of the process could be constrained in some way, for example where there is a target for the number of each product to produce over a time period. So these tokens are being created in the Object Process Flow of the object we're calling OpportunityCombiner at time zero based on the table shown above: Instead of the normal array generation this model creates a table label of the required parts for a product and stores it on the token. For Product1 that looks like this: Tables aren't quite fully supported as labels yet so the syntax is a little odd when using them - in this case we do it like this: Table(token.partsTable)[1]["Part"]  // evaluates to 'F' Setting the labels up so that syntax works is a bit more complex. Note that the partsTable label is actually a pointer to the data table label on the token - called partsTableData. To get the view shown above you need to right click on the label partsTabelData and select "Explore As Table". Hopefully in the future this may be more streamlined if more people start using labels as tables. The grid table doesn't play nice with sql, so another table creates itself at reset with a structure that is sql friendly: That means the label table can be created with this query: SELECT Part,Quantity FROM ProductPartQuantities WHERE Product=$1.product What remains for the product token just involves getting the parts (a subflow) and them moving the array of all items to the combiner (a queue in the example); stacking them together and releasing to the conveyor before looping back to try and produce another. Below you see the main flow with four tokens - one for each product defined in the grid. The subflow to get parts reads the token's table of parts for its product, and tries to get the correct quantities for each. This is similar to @Jordan Johnson 's solution for pulling from multiple lists, but is instead considering the table of parts from one list rather than arrays of resource lists and quantities. The key aspects of this flow are that 1. the first loop in the check section leaves the parts on the list, while the 'commit' section removes them 2. we exit the check loop by using the pull timeout when we fail to pull the required quantity of a part type 3. those that fail listen for pushes to the parts list 4. success full product pulls insert the items pulled to the tokens label 'allItems' for later use. Attached is the model. It should be relatively simple to transfer the process and tables to another model. OpportunisticCombiner.fsm

This model showcases the latest enhancements to the mass flow conveyor object, found in FlexSim 2023 Update 1. See several new features in action, including the Randomized fill order and Width Rules for conveyors. Mass-Flow-Bottling-Demo_23-1.fsm

This Kiva system demo model showcases some of the new AGV/AMR features that were added in FlexSim 2023, including new events and parameters to help with deadlock and allocation failure, and dynamic barrier management. You can update the layout through five parameters, and then click the “Build” button to re-build the system. FlexSim-2023-Kiva-System-Demo.fsm

This model is a proof-of-concept example demonstrating the integration of FlexSim with Python's Pyomo package to solve the Knapsack Problem. The model simulates a loading process of a logistic company. The truck has a weight capacity of 200 kg. The scenario includes 15 products, each with a specific weight and value. The product details are as follows: The objective is to determine which products to load onto the truck to maximize the total value of goods while ensuring the total weight does not exceed 200 kg. The ProductCreation Process Flow creates the products in a Queue. The General Process Flow has a Custom Code that creates a couple of Maps to store the products weights and values. It sets the capacity variable from the Parameters Table. These three parameters can be passed to python. Then it evaluates KnapsackProblem label on the Process Flow, passing those parameters in. The label is configured to connect to the KnapsackProblem function defined in the KnapsackProblem.py module. This function formulates the Knapsack Problem with Pyomo, solves the program, and then returns the optimal collection of products to be load onto the truck. Since the Decision Variables are binary, once the products are resolved, the values are stored in a Global Table, where 1 means that the product was selected. A Combiner uses this table to set the Component List. A forklift load the products and once completed, the truck leaves. When it enters the Sink a message is displayed showing the total weight and value loaded. Model Parameters There are two parameters that can be changed in this model. One is the Truck Capacity, which is the constraint of this problem. The value ranges from 100 to 300. There are three Global Tables in this model that store a different set of Weights and Values for each products. The table selected for the problem can also be changed using the GUI. Potential additions to this model could use priority for the products or include multiple trucks or constraints such as volume. Requirements to run the model In order to run this model, you need python properly configured, including: Install one of these python versions: 3.9, 3.10, 3.11 Install pyomo and highspy packages: python -m pip install pyomo highspy Make sure the python directory is part of your PATH environment variable. Configure your Global Preferences (the Code tab) to use the associated python version. This model was built in FlexSim 24.0 Knapsack_Problem.zip Troubleshooting If you are getting this error: exception: Code Binding Error: could not bind to function Node: /Tools/ProcessFlow/ProcessFlow>labels/KnapsackProblem Binding string: /**external python: */ /**/"KnapsackProblem"/**/ /** \nfunction name:*/ /**/"KnapsackProblem"/**/ Windows Error Code : 126 Check this post

Attached is a simple example of using the GIS Module. It contains a GIS Map with 8 Cities represented as points connected by driving routes. gis_example.fsm The model's Process Flow randomly generates tokens, which create items to be carried by trucks from one city to another. After a delay, the item is removed from the model. This very simple example demonstrates how to use the GIS Module to model movement of items from sources to destinations without any FixedResource objects. All the logic can be done through Process Flow to control what happens in the model. This model also demonstrates the Min Scale and Max Scale properties of a GIS Map object. By default, as you zoom the 3D view in and out, the 3D shapes on a GIS map scale so that they remain the same size on the screen, like abstract flat billboard images. When you zoom far out, because the items remain the same size, they seem really big relative to the map. Similarly, when you zoom far in, because the items remain the same size, they seem really small relative to the map. The Map object has Min Scale and Max Scale properties to cap the scaling up and down of objects as you zoom in and out, so that they will only scale up to a certain size and only scale down to a certain size. This makes it so they scale within a certain range, but don't get too big or too small. If you set both of these values to a particular number, then they will not scale at all, but rather be that particular size.

A number of questions on the forum involve racks being service by a combination of shuttles and elevators. There are solutions involving network, Astar and AGV navigators, but for this example we’re just going to use TaskExecuter FlowItems and conveyors. The elevator system in particular, as described to me, seemed it would benefit from the flexibility conveyors offer – particularly spacing options, and the possibility of having dog/power-and-free based travel. For the pick face we can just use the slot and item locations to give the task executers travel command, and we can use kinematics for loading and unloading tasks. This removes the need for network nodes or control points at each location and allows fine positioning of a ‘two spot’ shuttle in front of the slot. The system has been put into a container to represent the cell/aisle and it is this object that is the instance member of the ShuttleSystemProcess process flow. The cell is designed to be duplicated with each cell becoming a new member instance of the single process flow. It comprises two racks, two elevators (conveyor loops), and a shuttle return queue (also a conveyor but with no roller visual). The system assumes that by the time an inbound item arrives at the pickup position it has been assigned a slot in one of the racks in the cell – so you should assign a slot in the normal way before it reaches a shuttle. You can additionally request items for picking out of the racks by pushing the item to the global list ItemsToPick. Currently each shuttle will store and/or pick one item in one trip with a dedicated position for each. When doing both in a single trip, the order in which this happens will depend where along the level the slots are located. In the event that there are no remaining tasks but items still need to exit the cell, the shuttles at the front of the queue will be asked to circulate empty through the system, thereby allowing the outbound items to advance to the exit position. The number of shuttles in the system is a process flow variable. In the example system there are elevators at each end of the rack(s) with a number of carriers to transport shuttles to the levels. Both elevators have a process flow variable for the number of carriers to be generated. Shuttles are not allowed to pick from the same level at the same time but in order to keep the up-elevator moving the carriers can unload the shuttle to the level even if another is active on that level. The shuttles only travel along the face of the rack in one direction towards the down-elevator and once are collected by a carrier the next shuttle on that level can start its operations. It is possible to run the system with only one rack should you wish to view the operations without the second rack obscuring your view. Since different applications will use different rack dimensions the cell has a label method called “configureToRack” which will align the conveyors and decision points to Rack1 based on the level heights and size of the racks that the user has set for Rack1. There may be some limits to very small sizes when the conveyor decision points overlap. The second rack will be configured during this method call to mirror Rack1. Here’s an example invocation of this method for an instance of the cell: Model.find("RackShuttleSystem").as(Object).configureToRack The shuttles need levels to be the same height along the length of the rack. Some effort was made to configure the system based on the shuttle and carrier sizes, so you can try adjusting those to suit your needs and hopefully the alignment will work as needed. The elevator conveyor and shuttle speeds are not set by the alignment method so you can edit those in the usual way. This is an example for both learning and perhaps as a starting point for any project should you find the approach suits your application, modelling style and skills. ShuttleLiftAndRack.fsm Time taken: 1 day to build the working model - plus another to work around holes api for auto-alignment code. 17Nov Updated: to initalize shuttles at the load point (via fast entry) added shuttleQheight label for use to set the returnQ height in the cell (used by the alignment method) added a process flow variable 'shuttleLoadTime' for the time to un/load items. aligned shuttle kinematics to the speed and acceleration of the TE FlowItem.

Attached is a simple model that implements functionality for "pallet moles." These are small vehicles that move pallets forward in a racking system. The targeted behavior is a FIFO storage mechanism like what you would see in gravity flow racks. However, for incredibly deep storage, a gravity flow mechanism would result in unacceptable pressures exerted on the pallets at the front of the rack, especially when pallets collide with each other as they roll down the slot. These pallet moles solve these issues. They provide the forward movement that enables FIFO storage, without the unacceptable pressures that come with gravity flow. The functionality is implemented as two object process flows, one for the rack, and one for the pallet mole. As such, it is scalable to higher numbers of racks and moles. Just add the set of racks/moles that your model uses, and then make sure those objects are attached as instances of their respective object process flow. Moles can be moved between different slots in the racking system. If a mole needs to move to a different slot, it will request transport from a team of fork lifts. The fork lift picks the mole up from the slot, and moves it to the destination slot. RackMole.fsm

[ FlexSim 16.1.0 ] Attached is an example model that uses both of the new template process flows for AGV and AGV elevator control, available in FlexSim 2016 Update 1. Thanks @Katharina Albert (I believe), who provided the seed model, which I adjusted/extended as I implemented these process flows. This model enumerates many of the control point connections and path configurations you might use in an AGV model when using these template process flows.

This model shows a simple way of bringing together all the separate picks in an order to be consolidated in a putwall. It also shows a great way of tracking flowitems while on a conveyor through the use of tracked variable labels. A side concept is that the order reserves a slot in a rack for all of the picks. Conveyor-Routing-Order-Consolidation.fsm

This model shows a two-floor healthcare facility with an elevator connecting the two floors. Patients are moved on a gurney from different rooms and across floors. There is a dashboard with two checkboxes so you can turn on and off the visuals for the different floors. One unique feature of this model is that each patient has a constant companion who follows them throughout their care process. This could be used either to demonstrate that companions can be modeled in FlexSim, or as a basis for another modeler to copy. FlexSim-HC-2023-MultiFloor_With_Companion.fsm

Attached is a sample model that tracks social distancing metrics. I just grabbed one of our testing models, so it's not necessarily eye popping as far as visuals, but the basic concepts of social distancing metric tracking are in there. This model is implemented in the new 20.2 beta. It uses the new Agent module to detect proximity between objects. I added a proximity system, and added each operator as an agent in the system. I created an object that draws a "heat map" where proximity points happen. This is a visual tool called "HeatMap" in the model. If you send a message to the object it will add a "hot point" at the location of the sending object. I implemented the object's OnReset, OnMessage, and OnDraw triggers to do this. Once the heat map is set up, I have the proximity system send a message to the HeatMap from the involved agent object as part of it OnEnterProximity trigger. Second, I do some statistical tracking using a statistics collector named ProximityTimes. This listens to the agent proximity system's OnEnterProximity and OnExitProximity events, and collects data accordingly. The trickiest part to setting this up was sampling the actual event. For now (hopefully we'll get a better system in the future) you have to sample the event in the tree. In the Events tab of the statistics collector, press the sampler button, then in the tree navigate to the node at MODEL:/ProximitySystem>variables/behaviors/Proximity Behavior and hover the cursor over it to get the list of events. The ProximityTimes statistics collector collects individual times. This allowed me to add the "Time In Proximity" dashboard chart. For the other charts, I needed a calculated table to aggregate the values. The ProximityAggregates table aggregates the data needed for the other three dashboard charts: Total Proximity Time, Proximity Count, and Average Time In Proximity. SampleSocialDistancing.fsm

In a recent model I was building I needed a case packer that had some special abilities. This "Combiner" is different than a traditional library accessed Combiner because: 1) You can set how many containers can be packed at a time. (In my model 3 cases were packed simultaneously with each cycle. I call these "batches" in my logic. This variable is accessed as a label on the 3D object. 2) It assumes that all the flowitems being packed come from the same port, you can't have multiple sources of flowitems or have a recipe. Although it could be modified to allow for that. 3) It is very easy to set home many flowitems per container. This variable is accessed as a label on the 3D object. This could be changed easily as the itemtype or some other criteria changes while running the model. 4) If the flow of containers or flowitems is delayed, the machine can time out and release a partial batch or partially filled container. I have included a model control GUI so you can manually stop the sources and test this logic. Note the labels associated with max wait time in the object labels again. 5) After a batch of containers and flowitems has been collected, there is a RobotCycleTime that occurs that represents the moving of the flowitems into the containers, this time is ran one time for the entire batch. While this object may not be the final solution for a lot of instances, I believe that it is a good starting point for a lot of objects that will be needed in future models. The Process Flow is well documented to explain the logic. Note that this is an Object Process Flow and all instances will need to be connected to the logic in the process flow. CustomCasePacker.fsm 0

This supply chain demonstration model shows both a visual and statistical representation of a company's stock and backorder from day-to-day. The goal of the model was to predict shortages and backorder trends due to COVID-related disruptions. FlexSim's 3D view is used in a novel way to visualize the current stock and demand for each product. Each queue represents a different product SKU and each box represents a product unit, with red indicating product demand and blue indicating product availability. This model also contains a comprehensive set of dashboards to help visualize and interpret the data. Logistics_Supply-Shortages-Stockouts_v22-2.fsm

Note: the demo models were created specifically for the FlexSim user community who speak spanish, and all the explanations, statistics, and documentation available in the dashboard, GUIs, and Model Documentation are in Spanish. Nonetheless, given that 3D animation is a universal language, you are welcome to download these models regardless of the language you speak. Manipulación de material / Material handling Demo_Crossdocking.fsm En este modelo, llegan tres tipos de productos a dos zona de recepción. Un primer grupo de operarios se encarga de transportarlos a una zona de almacenamiento intermedio. Desde allí, otro grupo de operarios los clasifica según la ciudad a la que serán despachados. In this model, three types of products arrive at two reception areas. A first group of operators transports them to an intermediate storage area, where another group of workers sorts them according to the city they will be delivered to. Preparación de pedidos / Picking Demo_Picking.fsm En este modelo, los pedidos llegan de manera aleatoria a lo largo del día y son revisados y preparados por un operario. En este modelo, se puede modificar si los operarios realizan la preparación a pie o utilizando un vehículo, así como la ubicación del almacén de estibas y el número de operarios asignados. In this model, orders arrive randomly throughout the day, which are reviewed and prepared by an operator. In this model, you can change whether the operator does the picking on foot or using a vehicle, the location of the pallet zone, and the number of assigned operators. AGV - Vehículos de guiado automático Demo_AGV.fsm Este modelo demuestra la aplicación del módulo de AGVs de FlexSim, que permite simular sistemas que utilizan AGVs para el transporte automatizado de material. En este modelo, un AGV con capacidad para cinco productos se encarga de transportarlos entre dos zonas dentro de un proceso. This model demonstrates the application of the AGV module in FlexSim, which allows simulating systems that use AGVs for auomated material handling. In this model, an AGV with a capacity of five productos is responsible for transporting them between two zones within a process. Preparación de kits / Kitting Demo_Kitting.fsm Este modelo representa un proceso productivo que utiliza la técnica de preparación de pedidos. Mediante parámetros, es posible activar o desactivar estaciones de trabajo para evaluar el impacto en la productividad del proceso. This model represents a kitting process. Through parameters, it is possible to activate or deactivate workstations to evaluate the change in throughput statistics. Centro de vacunación / Vaccination center Demo_HC.fsm En este modelo se representan un sistema de atención de pacientes en un centro de vacunación. Los pacientes llegan de forma aleatoria, se registran y esperan hasta que una enfermera los vacune. This model represents a patient care system in a vaccination center. Patients arrive randomly, complete a registration process, and wait until they are vaccinated by a nurse. Cajero automático / ATM Demo_ATM.fsm En este modelo, se representan un sistema de retiro de dinero en cajeros automáticos (ATMs). Los usuarios llegan de forma aleatoria y realizan un retiro si hay un cajero disponible; de lo contrario ,esperan en la fila. This model represents a cash withdrawal system at ATMs. Users arrive randomly and proceed with a withdrawal if a cash machine is available; otherwise, they wait in line. Fluidos / Fluid Library Demo_Fluidos.fsm Este modelo representa un sistema de embotellado. Se generan, mezclan, procesan y finalmente embotellan dos tipos de fluidos. Después de embotellados, un operario los transporta a la zona de empaque. This model represents a bottling system. Two types of fluids are generated, mixed, processed, and finally bottled. After bottling, they are transported to the packaging area by an operator. Navegador GIS / GIS Navigator Demo_GIS.fsm Este modelo muestra cómo se utiliza el módulo GIS de FlexSim para determinar la ubicación óptima de un nuevo almacén, teniendo en cuenta una red de distribución específica. This model demonstrates how the GIS module of FlexSim is used to determined the optimal location for a new warehouse, considering a specific distribution network.

This sample model shows the flexibility and power of the mass flow conveyor object. It contains many examples of stations found in this production process, from depalletizing glass bottles all the way through final packaging. The model makes use of many custom shapes that add realism and visual appeal to the simulation. Mass-Flow-Bottling-Line-Custom-Shapes.fsm