Vault Ideas - Page 152

Anonymous · ‎07-12-2018

In the Copy Design application, why does the Exclude button act as a toggle yet none of the other buttons within the Actions column are? Currently, if you select any action option such as "copy", you can select any other option, but if you select "Exclude", you have to re-select "Exclude before you can select a different action.

m_hermann · ‎06-21-2018

Hi, Lifecycle transition for Quick Change 'Work in Progress' to 'Released' Action 'Options' need the activated option 'Check that dependent child files are "Released" . Or for what is this option?

RajSchmidt · ‎06-01-2018

Vault is configured to always show or retrieve the latest versions of everything. However, sometimes I want to retrieve not the version of an assembly with newest version of the components but rather the assembly in the last saved state. The same applies for the Latest/latest released toggle. It would be nice to have an option to pre-set this. Or if Vault would at least remember the settings I used the last time.

Anonymous · ‎05-31-2018

Is it possible to set the manual Change Revision button/command to an Admin only use? We have users (and I've seen this elsewhere) that will use this option to change the Revision of files as opposed to going through the proper lifecycle set and have Vault control/change the revision. This has, at times caused numerous issues when done by a typical user. Controlling this to a user with Admin rights would save a lot of headaches.

Anonymous · ‎05-29-2018

Using Empirical Model Data For GUI Auto Complete Wouldn't it be nice if the data in the vault could be used to infer the first constraint I was going to place or suggested parameter names based on those used previously etc.. Everyone loves a learning algorithm these days. Phil

Anonymous · ‎05-23-2018

Bonjour, Lorsque nous allons dans des sites où il n'y a pas de connexion internet nous faisons un "obtenir" des fichiers sur notre disque dur du portable. Nous ne pouvons malheureusement pas obtenir les objets personnalisés ni les articles. Par ailleurs il faut aller sur Windows pour consulter les fichiers. Il serait très intéressant d'avoir un mode Off-line de Vault pour garder l'interface. Salutations, Translation Offline access Hello, When we go to sites where there is no internet connection we do a "get" files on our laptop hard drive. Unfortunately we can not get custom objects or items. Besides, you have to go to Windows to consult the files. It would be very interesting to have an Off-line mode of Vault to keep the interface. Greetings,

Anonymous · ‎05-07-2018

Hi, I have the same problem as this topic: https://forums.autodesk.com/t5/vault-forum/batch-publish-to-pdf/m-p/7980064 I want to implement the PDF publish for new files --> I will do it inside a transition, no problem. But for "old" files that are already RELEASED, I need also to create all PDF files. I wanted to have a button similar to "Actions"/"Update view", so that I can publish all my old DWG files into PDF. The idea to create a Quick Change state that doesn't bump the revision, and then go again into RELEASED in order to publish the PDF is not the best option for me (I have several thousands of old drawings to publish) Thank you!

gilsdorf_e · ‎05-07-2018

I would like to know if there are any plans to consider NoSQL databases as Cassandra, HBase etc. as database for large Vault installations. If not, I would like to suggest it. With continuous growth of data, every admin of a large installation knows the pain of performance bottle necks with current relational implementation.

Anonymous · ‎05-03-2018

Bonjour, Quand on exporte ou importe des articles dans Vault on peut mettre en place un fichier de mappage des attributs. Etrangement ce fichier on ne peut pas enregistre ou charger le fichier dans Vault il faut l'enregistrer ailleurs ! Ce voudrait utiliser ce système pour une mise à jour des articles fournisseurs type palplanches d'Arcelor par exemple. Salutations, Translation Mapping files in Vault When exporting or importing items into Vault you can set up an attribute mapping file. Strangely this file can not save or load the file in Vault it must be saved elsewhere! This would like to use this system for an update of Arcelor type sheet pile suppliers for example. Greetings,

warren_ramsdale · ‎05-03-2018

Hi There, I use the same names for parts aand assemblies when doing sheet metal parts, for example, "folded metal" + "folded metal with PEM inserts fitted" which would be an assembly. both would be "metalpart.ipt" and "metalpart.asm". The problem is in Vault the "Large Icon" view mode does not differentiate between the two. One is an .ipt and one is an .asm, Maybe put an "P" or an "A" in the corners of the icons? Many thanks Warren

Anonymous · ‎04-19-2018

I am a teacher and want to use vault. I can't setup a Vault server. Integrate into your product a way for Autodesk to host a server (limit storage side per user) on vault. People can invite others to their vault by sending invitations. It's all handled via web data.

Anonymous · ‎04-18-2018

Bonjour, Il serait bien de pouvoir voir les photos dans Vault (avec le client Windows et avec le client web) en mode diaporama automatique. Là il faut les voir une par une ou sinon c'est obtenir dans Windows, c'est dommage. Salutations

Anonymous · ‎04-11-2018

When doing a Copy Design, it would be helpful to have a thumbnail image of each part, especially when doing multiple parts or large assemblies. That way you can see exactly what part(s) you need to Copy Design and what part(s) you can reuse.

Anonymous · ‎04-09-2018

Copy design enhancement: It would be very handy if we were able to set the style of the Copy Design tool in the Configuration of the Vault. Add a setting to allow a user to pick old copy design interface, “Classic Copy Design” or the current copy design interface, “Modern Copy Design”. This could be accomplish by adding a section to the Tools > Administration > Vault Settings, as an option for the end user, see bitmap picture attached.

Mike.Wohletz · ‎04-08-2018

With every new release of CAD software comes making everything match version for version. Why does not the current Vault client include all the add-in items needed for not only current but also previous versions of AutoCAD and Inventor, etc. While current version sounds great we have customers that drive the software used and sometimes that means that we use more than one version at a time but currently causes us to install Vault Client more than one time. This is not a clean way of working as I am looking at the same data with a different viewer and that it. make it simple so I can use the current Vault version and only install the current Vault client.

Anonymous · ‎03-13-2018

Add access to the ECO Number property to Autodesk Report Template Utility for creating a new Item Report and Item BOM Report. Only the ECO Number that authorized the release of the item revision of interest. ASME Y14.34-2013 requires the REV AUTHORIZATION NO (ECO Number) when creating a List and currently I see no way to add it to the Item Report or Item BOM report. Thanks, Larry Rice

Anonymous · ‎03-09-2018

Bonjour, Lorsque l'on veut visualiser un fichier REVIT dans le coffre avec afficher dans l'onglet Vault ouvre en réalité le fichier DWFX lié avec un Design Review. Ce Design Review n'est franchement pas génial. Le visualiseur Naviswork Freedom est nettement meilleur mais a priori il n'est pas possible de dire à Vault d'utiliser ce visualiseur. Il serait bien que ce soit possible. Salutations,

Anonymous · ‎03-08-2018

Bonjour, Vault est un logiciel d'Autodesk très utile pour la construction. Le mappage est bon avec Autocad et Inventor que nous utilisons. Par contre presque aucune propriété mappable avec REVIT et NAVISWORK. Par ailleurs il faudrait du mappage avec Adobe. Salutations, Translation Hello, Vault is an Autodesk software very useful for construction. The mapping is good with Autocad and Inventor that we use. By cons almost no property mappable with REVIT and NAVISWORK. Moreover, it would need mapping with Adobe. Greetings,

Thomas_Helm · ‎03-02-2018

It would be great to support additional state security action to force or block application commands. For example if you don't want to allow a user to create a copy outsite of Vault, the Save As command including windows desktop copy is blocked. This can be reached with Microsoft's Rights Management Service (RMS) which is supperted by MS Office and Adobe already. Additional use case can be that based on the state specific application commands are disabled. So if the drawing file is in a state approval, the user cannot add or remove models, but can add / modify the title block / text or add measurements. I've created also an idea for Inventor to support RMS https://forums.autodesk.com/t5/inventor-ideas/support-of-microsoft-rights-management-service/idi-p/7821872

rtowne72 · ‎03-01-2018

Currently we use Azure to store our backups from ADMS when I manually backup. I take the Backup and push it to Azure once the backup has completed and been validated. It would be nice to have an option to backup direct to a cloud service such as Azure, AWS or others direct from the ADMS console.

Community

Copy Design - Fix the Exclude button

quick change - options

Pre-set retrieve options

Change Revision button - Admin only

Using Empirical Model Data For GUI Auto Complete

Accès hors ligne

Batch publish PDF of existing drawings

NoSQL implementation for Vault

Fichiers de mappage dans Vault

Clarifying Larger Icon Mode

Have vault authenticate to Autodesk Server - No user server to create

Visualisation des photos

Preview/Thumbnail image of part(s) in Copy Design

Copy design interface configuration setting option.

Current release to include add-ins for multiple releases of AutoCAD / Inventor.

Make ECO Number Available In Autodesk Report Template Utility

Visualiseur maquettes REVIT

Mappage avec la CAO

Additional State Security Actions

Support to backup to Cloud from ADMS Console

Forums Links