- Home
- >
- Architecture, Engineering & Construction
- >
- Revit Products Forums
- >
- Revit Ideas
- >
- Switch Systems and Circuits: 3way switch in a system. Multi Sw Sys on Circuit.
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.
Translate
- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report
Switch Systems and Circuits: 3way switch in a system. Multi Sw Sys on Circuit.
Switch Systems and Circuits: 3way switch in a system. Multi Sw Sys on Circuit.
Allow me to connect a switch to a circuit. Then any lights (or outlets/fixtures) connected that switch would automatically be part of the same circuit. Multiple switch systems should be allowed on one circuit.
A switch system should allow for 3 & 4 way switches.
The project I'm currently working on has a circuit with two "ALWAYS HOT" lights, a normal switch with one light attached and a pair of 3 way switches controlling several lights. Which basically means that I need to show the wiring from the ALWAYS HOT fixtures to the regular switch then to one of the 3-way switches and then the home-run pointing to the Panel.
I need to graphically show a wire going from each 3-way switch to one of the lights and a wire going from the regular switch to the one light it has attached.
Forums Links
Can't find what you're looking for? Ask the community or share your knowledge.
Submit Idea
