尊敬的开发者: 您好,我是一个Revit的使用者,在使用中由于软件的某些造成一些困扰,现向您提出一些建议,希望您考虑! 先说下困扰我的问题,在制作门族的时候,门的五金构件如"把手“、”锁具“等构件,我以嵌套族的形式嵌入进来,并且设置了不同的参数类型区分,然后把该门族加载进一个新建的文件内,把该门族放进一面墙体上,在项目操作上,也许会出现这种问题,在门不用换的情况下,我想更换门上的五金构件,就是上面提及到的”把手“、”锁具“等等,如是,另建了五金构件,并且勾选共享,然后加载进来,然后选择门族,打开编辑类型,问题出现了,由于在制作”把手“和”锁具“族的时候,由于都只能选择门族类别,而没有详细的区分,所以2个不同的族类别是互通的,我会在更换”把手“的选项框内有”锁具“的选项,这样的操作肯定是不可取的、不方便的,如果在族类别下可以自定义子类别,岂不是更好,在更换嵌入族构件的时候更加清晰,方便选取! Dear developer: Hello, I am a Revit user, in the use of some of the problems caused by the software, and now you make some suggestions, I hope you consider! The first said the problems I had, when the production of door family, door hardware components such as "handle", "lock" and other components, I come in the form of embedded nested family, and set the parameters of different types of discrimination, and then the door and loaded into a new file, the the door into the family side of the wall, in the project operation, this problem may appear in the door, do not change the situation, I would like to change the hardware component on the door, is referred to above the "handle", "lock" and so on, is to build the hardware components, and check the sharing. Then load in, and then choose the door, open the edit type problem, as in the production of "hand" and "lock" family time, because they can only choose X-gate categories, without detailed distinction, so 2 different ethnic categories The exchange is, I will in the replacement of "handle" the option box "lock" option, such operation is certainly not desirable, is not convenient, in the family category can be custom subcategory. Wouldn't it be better if, in the replacement of embedded family member is clearer, selects! 本人的邮箱是:qmqyqj@126.com,希望能够收到您的回信,谢谢! My mailbox is: qmqyqj@126.com, I hope to receive your reply, thank you!
Show More