Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I should be able to add layers to a ramp. Never is a ramp one layer of material unless its a monolithic concrete ramp. I should be able to add layer materials to ramp composites.
please give an abillity to make layers and different slop to Ramp in every project we need make many layers and different slop in one ramp , for example at first the slope must be 10 percent and then 15 percent but in ramps we couldn't make this rules. for do true rules and true layers we have to make ramps by floor and it's too bad. please give this abillity to Ramp tool.
Yeah, basically ramps should be like stairs. If stairs have architectural finishing, so ramps should have too. Many buildings have accessibility ramps right next to the entrance stairs. All they all must have the same architectural finishing.
I see no use of the ramp in the current implementation. I always create an inclined slab to able to separate structural and architectural models. I'm not doing much of landscaping, and ever there a ramp must have layers.
