Robot Structural Analysis Forum
Welcome to Autodesk’s Robot Structural Analysis Forums. Share your knowledge, ask questions, and explore popular Robot Structural Analysis topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Diaphragm problem to be corrected

10 REPLIES 10
SOLVED
Reply
Message 1 of 11
mustafahesenow
3911 Views, 10 Replies

Diaphragm problem to be corrected

1



Mustafa Hesenow
Senior Structural Design Engineer/MZP
LinkedIn

10 REPLIES 10
Message 2 of 11

HI Mustafa,

 

It is indeed the valid point however there are at least few concerns when you look at the 'broader' picture which include ways in which you create a model:

 

1. What if there are no stories in the model?

2. What if you have few modal analysis with different load to mass conversions or mass offsets (X+, X-, Y+ etc.)?

 

Anyway I have forwarded your comments to the development team. 

 

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

 



Artur Kosakowski
Message 3 of 11

1



Mustafa Hesenow
Senior Structural Design Engineer/MZP
LinkedIn

Message 4 of 11

1



Mustafa Hesenow
Senior Structural Design Engineer/MZP
LinkedIn

Message 5 of 11

Hi Mustafa,

 

I'm afraid my knowledge in this area is too limited to answer yes or no on such question. Personally I think what you wrote makes sense and this is why I forwarded your comments to the development team so that they could investigate this further. 

 

 

 



Artur Kosakowski
Message 6 of 11

1



Mustafa Hesenow
Senior Structural Design Engineer/MZP
LinkedIn

Message 7 of 11

Hi Mustafa,

 

I'll contact you off the forum for this. 

 

 



Artur Kosakowski
Message 8 of 11

Hi @mustafahesenow

 

I have added this request to the wish list and forwarded it to the development team.



Artur Kosakowski
Message 9 of 11
okapawal
in reply to: mustafahesenow

Implemented in RSA 2022 release.  The primary node for diaphragm is created at the Gravity Center of a storey projected on the floor plan.



Waldemar Okapa

Sr Product Owner
Message 10 of 11
elmorro
in reply to: okapawal

But still individual diaphragms are created for each slab in the story

Message 11 of 11
Romanich
in reply to: elmorro

Hi @elmorro ,

The workaround:

https://apps.autodesk.com/RSA/en/Detail/Index?id=8768390536116652588&appLang=en&os=Win64

Do you find the posts helpful? "LIKE" these posts!
Have your question been answered successfully? Click 'ACCEPT SOLUTION' button.

Roman Zhelezniak

Robot Evangelist & Passionate Civil Structural Engineer

LinkedIn | Robot & Хобот | App Store for Robot
EESignature


Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report