Toposurface and Lines on Elevation

[jorgedacunha60]

Toposurface!

I have problem on my Toposurface, it shows below grade and I don't know how to solve this problem.

I Also have been tried eliminate some lines on my elevations without success.

Could someone help me to solve these problems.

Much Appreciated,

George  

[alan_eu · Accepted solution]

Hi @jorgedacunha60 

Probably your problem ll be easy to solve:

1. Did you try to join them? ( Menu modify / join / select that elements)

2. Try to align them. Go in 3D mode and zoom it. use AL command, click in the 1st wall, them the 2nd;

3. Maybe that's a video card bu. Try to disable on options/hardware/use hardware acceleration and restart your revit.

[ToanDN · Accepted solution]

turn on section box and stretch it inward to cut the topo.

[syman2000 · Accepted solution]

Looks like your topo is very close to the building. You may want to extend out topo beyond building. Afterward follow what @ToanDN said with the scopebox.

[jorgedacunha60 · Accepted solution]

Happy New Year! Thank you for your input. If I check in the section box,
afterward I have to hide in view in order to render the image, because if I
uncheck the section box, I would have the same problem! I am going to try
your post and I will try to render it.

Thanks,
George