Extending Stringer

[awadsworth8Q4WM]

There has got to be a way to extend the stair stringer.  I have looked everywhere and cant find anything.  See attached picture.

[awadsworth8Q4WM]

There has got to be a way to extend the stair stringer.  I have looked everywhere and cant find anything.  See attached picture.

[barthbradley]

Tried these settings?

[barthbradley]

Tried these settings?

[awadsworth8Q4WM]

I have those settings.  The problem is the stringer cuts off at bottom stair nose. (Attachment pic 1).  What I need to happen is the stringer extends past the bottom stair nose at least 7". (Attachment pic 2)

[awadsworth8Q4WM]

I have those settings.  The problem is the stringer cuts off at bottom stair nose. (Attachment pic 1).  What I need to happen is the stringer extends past the bottom stair nose at least 7". (Attachment pic 2)

[ennujozlagam]

you need to separate profile of your stringer together with your railing or separate stringer and railings to achieve this. thanks

[ennujozlagam]

you need to separate profile of your stringer together with your railing or separate stringer and railings to achieve this. thanks

[_Vijay]

in the END only you can not change the profile ….try with inplace in the end only. refer below snip may be it will help you.

[_Vijay]

in the END only you can not change the profile ….try with inplace in the end only. refer below snip may be it will help you.

[barthbradley]

Untick Begin with Riser

[barthbradley]

Untick Begin with Riser

[barthbradley]

[barthbradley]