Extending Stringer

awadsworth8Q4WM · ‎08-19-2020

There has got to be a way to extend the stair stringer. I have looked everywhere and cant find anything. See attached picture.

barthbradley · ‎08-19-2020

Tried these settings?

awadsworth8Q4WM · ‎08-19-2020

I have those settings. The problem is the stringer cuts off at bottom stair nose. (Attachment pic 1). What I need to happen is the stringer extends past the bottom stair nose at least 7". (Attachment pic 2)

ennujozlagam · ‎08-19-2020

you need to separate profile of your stringer together with your railing or separate stringer and railings to achieve this. thanks

Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.

_Vijay · ‎08-19-2020

in the END only you can not change the profile ….try with inplace in the end only. refer below snip may be it will help you.

Vijayakumar
Head of BIM
Did you find this post helpful? Feel free to like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

barthbradley · ‎08-19-2020

Untick Begin with Riser

barthbradley · ‎08-19-2020

Community

Extending Stringer

Extending Stringer

Extending Stringer