A stair with different Steps

TomasoCardia
Advocate
Advocate

A stair with different Steps

TomasoCardia
Advocate
Advocate

Hi all! 

I'm tring to build this type of stair (image 01,02).

Is there a way to build it as one stair (with different steps)? How ?

Thank you!01.JPG02.JPG

0 Likes
Reply
Accepted solutions (1)
2,452 Views
18 Replies
Replies (18)

barthbradley
Consultant
Consultant

Paint tool? Looks like you just want to change the tread surface material. 

0 Likes

TomasoCardia
Advocate
Advocate

on the second image are two different steps

0 Likes

barthbradley
Consultant
Consultant

Looks like two different stair types then. Do it that way; one stair type without stringers on top of another stair type with stringers.  No? 

0 Likes

loboarch
Autodesk
Autodesk

You will never get it with one stair. Looks like 2 stair types to me. 1 "regular" stair and one that is deep like seats.



Jeff Hanson
Principal Content Experience Designer
Revit Help |
0 Likes

TomasoCardia
Advocate
Advocate

Captura.JPG

going ahead to this way, altough I think is it incredible that there is not other way to do this real common stair.. 

Thank you for your helps

0 Likes

ToanDN
Consultant
Consultant

Below is what I would do.  A big stair and smaller steps as pieces of floor.

Capture.PNGCapture1.PNG

barthbradley
Consultant
Consultant

If Section "Corte A-A" is accurate, I would say that this stair design is not "common".   Just saying.  I think doing it as two stairs is closer to the way it will get constructed in the field.   

 

...actually, I take that back. I like @ToanDN's approach. That's how I'd roll....or "step". Nice job though, @TomasoCardia

0 Likes

ToanDN
Consultant
Consultant

Capture.PNG

0 Likes

TomasoCardia
Advocate
Advocate

ok 🙂 How did you built it?

0 Likes

barthbradley
Consultant
Consultant

...reminds me of head-rolling day.   Smiley Wink

0 Likes

ToanDN
Consultant
Consultant
See my post above it. I was trying to add the final image to it but wasn't allowed so I had to create a new reply.
0 Likes

Corsten.Au
Advisor
Advisor
Accepted solution

Split Stairs in 3 parts..Split Stairs in 3 parts..

All the risers should touch two Boundaries, that constraints the way stairs are modelled..

check this if that helps..

https://www.dropbox.com/sh/xviskk5nvjuiv9c/AAAwSn7cbPLtFLF3-wMpv8iAa?dl=0

Corsten
Building Designer
0 Likes

TomasoCardia
Advocate
Advocate

The problem in this solution is that if you want to measure the right m3 of concrete you need, for example, you cannot (or you can do it but not the in the right way - the construction system are different)

0 Likes

TomasoCardia
Advocate
Advocate

Really brilliant solution! 

Thank you very much

0 Likes

TomasoCardia
Advocate
Advocate

01.JPG

Done!

Thank you to all! 

Anonymous
Not applicable

Thank you! but I can't download the attachment, could you explain how to build it?

0 Likes

Anonymous
Not applicable

Hi ! How to build it? Thank you!

0 Likes

barthbradley
Consultant
Consultant

Start a new tread @Anonymous .  

0 Likes