A stair with different Steps

[TomasoCardia]

Hi all! 

I'm tring to build this type of stair (image 01,02).

Is there a way to build it as one stair (with different steps)? How ?

Thank you!

[barthbradley]

Paint tool? Looks like you just want to change the tread surface material. 

[TomasoCardia]

on the second image are two different steps

[barthbradley]

Looks like two different stair types then. Do it that way; one stair type without stringers on top of another stair type with stringers.  No? 

[loboarch]

You will never get it with one stair. Looks like 2 stair types to me. 1 "regular" stair and one that is deep like seats.

[TomasoCardia]

going ahead to this way, altough I think is it incredible that there is not other way to do this real common stair.. 

Thank you for your helps

[ToanDN]

Below is what I would do.  A big stair and smaller steps as pieces of floor.

[barthbradley]

If Section "Corte A-A" is accurate, I would say that this stair design is not "common".   Just saying.  I think doing it as two stairs is closer to the way it will get constructed in the field.   

...actually, I take that back. I like @ToanDN's approach. That's how I'd roll....or "step". Nice job though, @TomasoCardia. 

[ToanDN]

[TomasoCardia]

ok 🙂 How did you built it?

[barthbradley]

...reminds me of head-rolling day.   

[ToanDN]

See my post above it. I was trying to add the final image to it but wasn't allowed so I had to create a new reply.

[Corsten.Au · Accepted solution]

Split Stairs in 3 parts..

All the risers should touch two Boundaries, that constraints the way stairs are modelled..

check this if that helps..

https://www.dropbox.com/sh/xviskk5nvjuiv9c/AAAwSn7cbPLtFLF3-wMpv8iAa?dl=0

[TomasoCardia]

The problem in this solution is that if you want to measure the right m3 of concrete you need, for example, you cannot (or you can do it but not the in the right way - the construction system are different)

[TomasoCardia]

Really brilliant solution! 

Thank you very much

[TomasoCardia]

Done!

Thank you to all! 

[Anonymous]

Thank you! but I can't download the attachment, could you explain how to build it?

[Anonymous]

Hi ! How to build it? Thank you!

[barthbradley]

Start a new tread @Anonymous .