Be able to tweak bodies in a ipn file. Use Case:   I have a library component these are generally stored within the library with as few files stored as possible because they are purchased as one item. In the following case for example if the library component has many parts to it and there is an assembly, install sequence or maintenance schedule that needs to be explained with the use of an ipn file (and the configuration could be different in different cases) the bodies can not be tweaked in the ipn to show this. So the workaround (Item 2 below) was to derive the library file into another file then move the bodies, then place it into the assembly as phantom then create a view rep then create the additional tweaks needed for the other components. For the balloons add a balloon to an existing component move to the phantom component add balloon from list then remove the blank balloons.     Show More

Скорее это даже не идеи, а немой вопрос. Почему? (Смотрим приложенные картинки) Почему эти и не только эти окна не динамичны? В командах окна для ввода данных тоже "кастрированные". В крупных сборках, если задаешь взаимосвязи используя систему координат детали увидеть стрелочку от плоскости системы координат для выравнивания практически невозможно из-за их микроскопичности и нечитабельности. И таких моментов масса. Я не буду упоминать всяческие сбои в самой программе, потому как понимаю программа непростая, но таким мелочам стоит уделять внимание ибо это сильно раздражает в 21-вом веке. Руководство моей компании давно настаивает на переход на другую платформу, но мне очень этого не хочется. Я работаю с 4-той версии. А то, что произошло с программой после 9-той версии привело меня в уныние, но человек к многому привыкает. Но к сожалению интерфейс ни на миллиметр не становиться лучше. И терпенье не безгранично. В какой то момент я соглашусь с начальством. Show More

When we are in an assembly and we have one component selected by left mouse click if we right click in another assembly and press open it will open the component we selected before with the left mouse click.   This is the only program I know that works this way, this leads to open things we don't want and consume time.   It would be great when we right click over something, it popped-up the right click menu for the component or thing we had the mouse over, for example I have component "B" selected via left mouse and "A" highlighted because I have the mouse over it, if I right click while "A" is highlighted I would expect for the menu to be relative to the component "A", but at the moment it's related to "B".   Hope you understand, I know that this at least in my office everyone hates when this happens. Show More

Inventor Drawing automation should use more AI technology. To Produce working drawings on the fly when making new parts and assemblys. Default drawing should show flat pattern in sheet metal and auto dimensions  sheet extents. When you are finished the part the AI system will have the drawing created which you can edit later if needs be. I think a feature like this would give Autodesk the cutting edge of technology in the market of 3D cad design software.   Look forward to seeing this in future versions of Inventor   Regards   P Neville Show More

Introducing 3d curved path pattern feature in the assembly environment completes the deficiency. Adding the flat belt belt thickness feature to the belt add command provides great convenience         Show More

Anwender wünschen eine Option zum Aktualisierung aufschieben in den Anwendungsoptionen. Beim öffnen einer IDW steht diese Option zur Verfügung. Show More

Drawing in Inventor still takes too long. Is there any way to automate this process? I am not talking about putting views in the drawing as it can be done right now, what I wanted was to generate the individual drawings of each part with dimensions, part list, through an assembly. Is this something that can be developed? Show More

I'm begging you change the 3D orbit control back to the way it was. At the very least let me rotate about ANY point I select without having to zoom in on a region of my model. Show More

I have many iLogic file. I wanted to spread the icons in the all view, it was not possible because there were many iLogic. I don't understand why all iLogic files have to be loaded into the panel. It's a performance disruption. There is useless data in the computer memory. Set the default behavior to 'NoButtonDefinition If someone wants an icon with iLogic, just give 'YesButtonDefinition This behavior would be better than burdening all users with unnecessary data in Customize User Commands. Behavior now = default setting = 'YesButtonDefinition New behavior what I want = default setting = 'NoButtonDefinition Current behavior process in video link https://www.youtube.com/watch?v=eSzR69JXsE0   Show More

Suggestion to add a "CTRL + drag" temporary orthographic "lock" when dragging view labels (and other annotations) that get pulled away from view borders in the .IDW environment. Would be even better if upon drag, the label would actually snap to the view border.   Not quite sure what "Constrain to View Border" is supposed to do. Doesn't seem to do anything.   Thanks for reading and possibly considering. Show More

Please add the ability to control the part template used to generate the *.ipt files made by Frame Generator (and probably the Tube & Pipe as well, i haven't gotten there yet) in a more clear and concise way so it will match other (custom made) templates used by a users company or otherwise.   The solutions I have found or asked for in the forums is a bit roundabout and unclear but, it should be easier to do since you can make a customized part, assembly, and drawing file template. Show More

When milling a part it's often necessary to turn the part over and mill the bottom side. It would be *really* nice if you could set the Home position of the Viewcube for each Setup so that when you click on each Setup in the browser and then click on the Home Icon above the Viewcube the part would flip to the proper view for that Setup. I sent in this suggestion via several channels since the 2017 version and have never seen or heard a word about implimenting this feature. Show More

For drawings of large buildings it's nice to include an isometric to help orientate where the detail is located. The isometric may be 90% of the file size - The isometric doesn't need to be to 12 decimal places - it's just a view to include on the idw/dwg.  I guess the Flatshot could be generated by Inventor - why not both? Show More

In a multi-solid part. You can "Make Part" from a selected solid to create a new part, but this part is linked to the original file meaning any modifications (on a feature which was done in the original file) needs to be done in the original file.   What I would like is to create a "Make Unlinked Part" which makes a new file of the solid but contains the features used to make the part. This would be it's own separate instance. Any dimensions which used another solid to work out it's geometry could just pop up with a "re-dimension" message of sorts. Show More

It would be nice to be able to manage the writing of the title of a view showing an unfolded sheet via the styles. It is indeed possible for detail views, sections, but apparently not for unfolded views. Show More

Hello Autodesk,   If there are parts in the BOM that have an expression, we can edit this expression. But it is not shown in the same way as in the Iproperties, where you can directly see that it is an expression by the fx button. Also you cannot turn off the expression as you can do in the Iproperties by clicking on the fx button.       One idea is to add a customization column in the BOM called "Expression" which adds a checkbox in each row, which you can drag into another column. For example we use only the Description column, so it would only be necessary to add it once in our templates. But you can do this on more than one column if you want. Or you can never use it at all and it is not in the way.   This is just the suggestion. It could also have a dedicated button at the top next to the customization button.       Either way: the result looks like this. The checkbox in this example shows that the description has an expression active.         Show More

Come on Autodesk. When are we going to get the ability to import IFC files into Inventor?   We've been asking for years! Show More

There is a standard view named: "Isometric". I suggest that view Trimetric and Dimetric can be added. Show More

When you make an exploded view, Inventor automatically makes exploded view lines. But the lines are overlapping each other, and it is not very clear how to read then for the customer. So what I do is in de drawing, I draw them my self. I would like to draw the route myself in the exploded view (3D), and that comes in the drawing. Show More