Hi, I have a issue that i have linked building model in to my file and that link file have a MEP model linked in to it, the problem is that if I open the link file and setup a floor plan view in that one that show the MEP pipe and all of that and them in my new file I linked that view and setup my view (by linked view) I can't now see any MEP element in my new view that have that model linked. I hope that I explain myself clear. to be clear
1-file Model (A) with a Link MEP model (B)
2-setup View model (A) that show model(B) elements.
3-new model (C) with linked model (A)
4-setup plan view in model (C) with linked plan view model (A)
5-element from MEP model (C) don't show up in linked Plan view model (A).
I want that all the MEP model element show up in my model without linked the MEP model in model (C)
Thanks.
so you have A and B models, linked B into A and linked A into C and you are not seeing B in the C model, correct?
in A, open the Manage Links and set B to be an attachment.
Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
About Nesting Linked Models -- Attach vs. Overlay:
Display a Linked Model by Linked View:
Were you able to get your MEP to display in your model correctly?
Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Can't find what you're looking for? Ask the community or share your knowledge.