Revit wall hatch make mess while insert column

[ashf_4uSJRKF]

Revit wall's hatch make mess while insert column and join.... it make me big trouble....  after column and wall make join .. please give some suggestion ....

[ennujozlagam]

try to edit your column family > then go to properties > uncheck automatically joins geometry to walls > load again and change the existing column with new one and see if helps. thanks

[RDAOU]

@ashf_4uSJRKF 

How about you post an image showing the kind of mess you are having

[ashf_4uSJRKF]

screen shot uploaded 

[RDAOU]

@ashf_4uSJRKF 

Nothing attached...if you are using Windows 8 or Later

1. use SHIFT + WIN Key + S
2. Capture the screen
3. Then in your reply use CTRL+V

[barthbradley]

Sounds like you are describing a join order thing.  Switch the switch join order between the column and wall using the Switch Join Order tool. 

https://knowledge.autodesk.com/support/revit/learn-explore/caas/CloudHelp/cloudhelp/2019/ENU/Revit-M...

...or Unjoin may get you to where you want to go.  If auto join is the culprit, you can turn it off in the Family.  

[ashf_4uSJRKF]

 

image uploaded 

[RDAOU]

@ashf_4uSJRKF 

It is a bug which Autodesk is/should be aware of considering the fact that it has been reported repeatedly since version 2018. It happens when the Join is in a wall set to wrap at inserts (window/door/opening).

If you edit wall type and set wrapping to <none> the join should work. However, to keep the wrapping, there are a couple of options/workarounds to Fix:

• Option 1: (Easiest) is to split the walls at the column, then disallow join and use Join Geometry Manually and the join should work as expected (See GIF below)
• Option 2: (Not as easy) is to edit the family of the inserts and fix the Closure Planes for interior exterior (there is a previous post on this option I will try to dig it up)