Move baluster inside landing

[Anonymous]

Hello Friends,

Can anybody let me know how to move these balusters 2" inward? I attached the files. Thanks

[Anonymous]

Hello Friends,

Can anybody let me know how to move these balusters 2" inward? I attached the files. Thanks

[Ilic.Andrej]

Simply edit the railing path...

[Ilic.Andrej]

Simply edit the railing path...

[barthbradley]

oops. I think you mean this:

[barthbradley]

oops. I think you mean this:

[Anonymous]

It didn't work. It doesn't move the first one.

[Anonymous]

It didn't work. It doesn't move the first one.

[barthbradley]

What about changing the spacing of your start/end posts instead?  

...I just opened your file. I don't see a way to do that as a contiguous rail using your rail type. 

[barthbradley]

What about changing the spacing of your start/end posts instead?  

...I just opened your file. I don't see a way to do that as a contiguous rail using your rail type. 

[Anonymous]

It is Grayes out. I attached the file 

[Anonymous]

It is Grayes out. I attached the file 

[barthbradley]

Yeah, I looked at it. I don't have an easy fix. I don't think there is one.  It's a challenge for sure. 

...I would probably built it differently. I would not put the glass in as Railing, but instead as a Baluster Panel. 

[barthbradley]

Yeah, I looked at it. I don't have an easy fix. I don't think there is one.  It's a challenge for sure. 

...I would probably built it differently. I would not put the glass in as Railing, but instead as a Baluster Panel. 

[barthbradley]

FWIW: the approach I would use would be along these lines:  

https://www.autodesk.com/autodesk-university/class/Designing-Custom-Railing-Panels-Revit-2017#handou...

[barthbradley]

FWIW: the approach I would use would be along these lines:  

https://www.autodesk.com/autodesk-university/class/Designing-Custom-Railing-Panels-Revit-2017#handou...

[ToanDN]

See attached.

[ToanDN]

See attached.

[Anonymous]

Toan, I don't want to manually edit the path all over the project. I believe you can find a way 😉

[Anonymous]

Toan, I don't want to manually edit the path all over the project. I believe you can find a way 😉

[barthbradley]

You know you can edit the Top Rail path independently and add 2" on either side. Just TAB-select it.  Wouldn't that accomplish the same thing as a 2" end post inset? 

[barthbradley]

You know you can edit the Top Rail path independently and add 2" on either side. Just TAB-select it.  Wouldn't that accomplish the same thing as a 2" end post inset? 

[Anonymous]

I fixed it as attached. Thanks for efforts

Now the problem is, how to shift glass 2"?

[Anonymous]

I fixed it as attached. Thanks for efforts

Now the problem is, how to shift glass 2"?

[barthbradley]

I wouldn't inset the Post Balusters 2 inches.  I would TAB-select the Top Rail, press Edit Rail and then add a 2 inch sketch line at both ends.  

You can't inset your Glass because it's defined as a continuous Rail.  

[barthbradley]

I wouldn't inset the Post Balusters 2 inches.  I would TAB-select the Top Rail, press Edit Rail and then add a 2 inch sketch line at both ends.  

You can't inset your Glass because it's defined as a continuous Rail.