How to define non-normalized curve parameter in revit architecture

[Filipe_Cuango]

hello guys I use revit 2018, and have a revit 2013 exercise. In which you ask me to host a reference point on a reference line and then enter a value in the non-normalized curve parameter. This same parameter in my properties panel does not appear. Can someone help me locate this parameter value within revit 2018?

[martijn_pater]

Seems like your exercise says to do a normalized curve at 0.25 though? Otherwise switch field above the one you've marked there, measurement type.

https://knowledge.autodesk.com/support/revit-products/learn-explore/caas/CloudHelp/cloudhelp/2020/EN...

This parameter displays if Non-Normalized Curve Parameter is selected as the Measurement Type.

[barthbradley]

[Filipe_Cuango]

@martijn_pater Hi

Thanks for the explanation. But it is still a little difficult for me. I can't find the option to put it as a measurement type.

[barthbradley]

You need to pick "Draw of Face" before placing the Point on the line. You will then have "Measurement Type" Parameter available.

[martijn_pater]

@barthbradley Nice catch. I thought OP was already in properties menu, but it's only the tutorial page I guess...^^