Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Curtain Wall Height Dimension not as Properties

5 REPLIES 5
SOLVED
Reply
Message 1 of 6
IMCornish
694 Views, 5 Replies

Curtain Wall Height Dimension not as Properties

I have inserted a curtain wall into a stacked wall and used the 'cut' tool to subtract it from the masonry.  However, whilst the properties for the curtain wall show the correct placement and dimensions, the height is greater than the wall it is inserted into when it should be lower.  The curtain wall when looked at in elevation only has 3 Shape Handles, being to the left and right and at the base but none at the head.  Further when looked at in section, whilst the dotted cross lines, demarking the top and bottom of the curtain wall, are in the correct place, the vertical centre line extends up past where I wish the height to be!

I have been using Revit since 2009 and never encountered this problem before. I am now using Revit 2021 and getting increasingly frustrated so can anyone help please?

Andrew Robertson
Chartered Architect
Robertson Partnership
Truro. UK
Labels (3)
5 REPLIES 5
Message 2 of 6
_Vijay
in reply to: IMCornish

Can you show some images with your intension for better clarification. 

Message 3 of 6
IMCornish
in reply to: _Vijay

Here are some images, hopefully they will be explained by my initial post.

Fig 1.JPGFig 2.JPGFig 3.JPG

 

Thanks for your help Vijay

Andrew Robertson
Chartered Architect
Robertson Partnership
Truro. UK
Message 4 of 6

Try to detach it. Probably was previusly attached to roof or reference plane

Message 5 of 6

Thank you very much, you solved it.  Don't know how it got attached but I am really grateful.

Andrew Robertson
Chartered Architect
Robertson Partnership
Truro. UK
Message 6 of 6

Glad it helped!

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Forma Design Contest


Technology Administrators