Create slope in floor a different way then adding height to points?
If you are trying to do what I thing you are trying to do (e.g. avoid having to manually calculate perimeter point elevations), I would cut a four-sided shaped floor to the shape you needed it with a void(s).
...still, the as-built is going to have control joints off of the corners.
I'm now trying to use a floor with a slope arrow - here's what I get:
When I cut a section through the floor it gets the slope right but its lifted above the level for some reason:
Now when I make a roof, it starts at the level, but I have variable turned on and it's bottom extents won't follow the level
Where did the idea of cutting a sloped floor to shape - rather than trying to slope a shaped floor - come from? That's brilliant. I wish I had thought of that.
...oh wait; I did think of that. I see I suggested that approach in Message #3 -- with pictures.
@gnarkill283: I just looked at @ToanDN's video. A unidirectional slope? Really? That’s nothing like I imagined your challenge to be. You don’t even need to use the Vertical Opening tool. Just extend the Slope Arrow beyond the sketch boundary. You can do that. No need to add the extra step of creating a four-sided slab to just turn around and slice it up using some "cutting" method. Obviously, you know where the bottom of the slab is. So you know where the Slope Arrow begins.
