Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Always vertical families that can be mounted to surfaces in linked models
Always vertical families that can be mounted to surfaces in linked models
Hi, I'm a lighting designer and I'm trying to find a way to make a basic pole or bollard light fixture for landscape lighting schemes. I want to be able to place the light fixture on a topographic surface (or any other ground surface) from a linked model and have the family remain vertical (so face-based family is out the window), but I can't seem to find a way to do it. The sticking point seems to be Revit not recognising any elements from linked models as valid for floor-based mounting. Any ideas as to how this could be done?
Create a non-host family. Check work plane box, check always vertical box.
Toan Nguyen Did you find this post helpful? Feel free to Like this post. Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
