Hello,
there possibility to allign beams and roof?
And manage the two beams at the ridge on the roof that overlap each others?
.rvt file is attached.
Thank's
Allignament between structural beams with roof and beams at ridge on the roof
You will need to draw the beam longer then draw a reference plan and cut with it.
Mostafa Elashmawy
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Screencast uploading
Mostafa Elashmawy
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Accepted solution
Mostafa Elashmawy
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
@MostafaElashmawy thank's a lot for screencats. I've confused "set work plane" with "reference plane".
But for the ridge on the roof?
I've hidden the fisrt beams and the cut.
Is the better way?
With 3D views can't cut geometry?
Thank's
What @RDAOU should work for you if the right beam system is exactly similar with the left ones but as they are slightly different, you can use the cut tool to cut both the right and the lift beam by the reference plan.
cut>>1st beam>> .ref plan
cut>> 2nd beam>> .ref plan
Mostafa Elashmawy
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Mostafa Elashmawy
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
@RDAOU this is how join automatically?
I undrestand for down side mirroring. Have to mirrow also reference plan with beam system.
Accepted solution
Mirror the beams and the ref planes altogether. You can group them and mirror.
