I've found that if using G187 and setting it to automatic, it doesnt post with every tool or toolpath. It also doesn't post a "P" value that makes much sense. There doesn't seem to be any rhyme or reason as to why it will post a "P1" or a "P3." I think it would be valuable to have the automatic function of G187 controlled by the tolerance that's input in the "Passes" tab.  Show More

This should be a button an on/off switch in the post processor output dialog window. It should behave before and after every tool change and at the beginning and end of every operation. I have a HAAS mini mill, and my Z zero is below the maximum Z height. My maximum Z height is about 4.3. So the issue is that after a tool change, since the spindle is located at Z zero, the machine moves X and Y. With tall parts, this causes a crash.  Show More

(for to use the Mashining extension probing) vith UCCNC Show More

Haas redesigned the Mini Mill.  I have one on order.  It would be great to get a Post Processor for this new and certain to be popular machine.  I ordered mine with the HRT160 4th axis. Show More

On machines with the Mist Extractor option, would it be possible to have a toggle to turn it on automatically at the start of the job?   Even better if there is a second option to only turn it on if through coolant tools are in use.   The M code is M158, it will turn off automatically 10s after M00, M01 or M30 is called. Show More

Would you please consider creating a post processor for the standalone controller. I have tried Mach3 post and Linuxcnc posts for this controller but the controller does not like some of the code at all 😞   Thanks Glen Show More

For reference we run HAAS VF4 machines with a TRT210 Trunnion head.   Current Post does not allow for you to select machine location at the completion of a program.  It would be beneficial to have a simple selection in the Post to choose where you would choose to send the machine at the end of the program.  It currently always sends the trunnion to B-0 and C-0 at program completion.  For access reasons to the platter due to machine configuration we don't want that, and would be great if we could have control of where the machine ends.  Only current functionality would be to do a NC "passthrough" however that isn't even at the end of the Post, so we have to add an optional stop immediately after that, then change that part before the program is actually over.    This could be used for many reasons, if your doing lots of vice work, or special fixturing and would like the table location and/or trunnion to be specific to make changing parts easier without requiring manual moves by the operator without having to manually edit your posts. Show More

Hi All, we are working on a Okuma Inspection post processor and would be happy to get some feedback from you before we put it into production. Feel free to download and test this post processor with caution and provide any feedback you might have. Thank you. https://cam.autodesk.com/hsmposts?p=okuma_inspection Show More

We are currently developing a post processor for the Mazak Inspection Post. Before we put it into production, we would greatly appreciate your feedback. You are welcome to download and test the post processor, and please do not hesitate to share any feedback you may have. Thank you for your cooperation. You can download the post processors from the following link. https://cam.autodesk.com/hsmposts?p=mazak_inspect_surface Show More

Hi All, we are working on a post processor for XYZ UMC 5x machine with Siemens 840D controller and would be happy to get some feedback from you before we put it into production. Feel free to download and test this post processor with caution and provide any feedback you might have. Thank you.   https://cam.autodesk.com/posts?p=xyz_umc-5x_siemens-840d   Show More

Hi all!   Would be helpful set the coolant M codes, and maybe some other M codes directly in the Machine configuration, so I can set the kinematic and the M codes directly from Machine configuration and have my post almost ready.   What do you think? Show More

We are working on Fanuc Robotics post processor and we would be happy to get some feedback from the community. Note that customization might be required in most cases for each specific machine, so please test carefully. Please feel free to download and test it:   https://cam.autodesk.com/hsmposts?p=fanuc_robotics   Show More

our school curently use fusion as our cnc operating software. we just recived new machine that use isac controler and we noticed that we dont have a post for fusion 360 so we will love u guys to make one  Show More

As of now, each new version of Fusion changes the directory where post.exe is, which makes your setup to edit a post-processor not work anymore until you update post.exe location in Visual Studio code. It would be very convenient to have, either a fixed directory in which post.exe and all its dependencies are copied or a symbolic link, which would end up having the same effect. Thank you for taking this into consideration. Show More

Hi all, Not sure this is the correct place, I would Like to get our 5 Axis Balestrini Idea CNC operating with 5 axis toolpaths generated in Fusion 360. I've been looking for a postprocessor for this machine for some time however cant seem to fins one. The machine is available in a number of Configurations we have a CS44  Machining Head Unit, with a few other options available.  Our machine might be considered old at this stage,  however it is still a very robust and capable machine.  Output format we required is .XPI. if that helps at all and I can provide some tested and working 5 axis code if needed. Show More