We are working on a generic post processor for the Raise3D fff printers. We would be happy to get some feedback from you before we put it into production. Feel free to download and test this post processor and provide any feedback you might have. If you choose to use it, you assume all inherent risk in using it, and we ask that you proceed with caution. You can download it from the following link. https://cam.autodesk.com/posts?p=raise3d the associated machine configuration files can be found there https://cam.autodesk.com/machineslist you will have to edit the config file, to reset the link with the post processor. Show More

We are working on Fanuc Robotics post processor and we would be happy to get some feedback from the community. Note that customization might be required in most cases for each specific machine, so please test carefully. Please feel free to download and test it:   https://cam.autodesk.com/hsmposts?p=fanuc_robotics   Show More

We are working on Kuka CAMRob Robotics post processor and we would be happy to get some feedback from the community. Note that customization might be required in most cases for each specific machine, so please test carefully. Please feel free to download and test it:   https://cam.autodesk.com/hsmposts?p=kuka_camrob     Show More

We are working on a generic post processor for the Sindoh fff printers. We would be happy to get some feedback from you before we put it into production. Feel free to download and test this post processor and provide any feedback you might have. If you choose to use this post processor, you assume all inherent risk in using it, and we ask that you proceed with caution. Thank you. You can download it from the following link. https://cam.autodesk.com/posts?p=sindoh the associated machine configuration files can be found there https://cam.autodesk.com/machineslist you will have to edit the config file, to reset the link to the post processor. Show More

We are working on Yaskawa-Motoman robotics post processor and we would be happy to get some feedback from the community. Note that customization might be required in most cases for each specific machine, so please test carefully. Please feel free to download and test it:   https://cam.autodesk.com/hsmposts?p=yaskawa_motoman_robotics     Show More

Main Needed Printers TAZ5 TAZ5 MOARSTRUDER TAZ6 TAZPRO There are a ton of TAZ5 and 6 machines out in the world. One of the highest selling mid level printers in 2015 to2018 Show More

No real issue, but the build volume dimensions for two of the Prusa 3D additive printers are incorrect. The MK3 and MK3s have a build volume of 250mm x 210mm x 210mm, currently in Fusion 360 machine configuration the dimensions are listed as 250mm x 210mm x 200mm.  The MK2 and MK2s build volume dimensions are correct; the MK2 is listed in my screenshot from Prusa below, however it is the same volume as the MK2s. Extremely minor but Prusa does have a MK2.5 and MK2.5s printer, which were upgrades to the original MK2s.  These printers have the same build volume (as the MK2 and MK2s) but have an updated extruder assembly and upgraded heatbed; leaving these out is likely warranted. I'm happy to provide more documentation or explain why there is a variance between the MK3/MK3s and MK2/MK2s/MK2.5/MK2.5s. F360 machine configuration Prusa MK3   Prusa build volume comparison   Prusa referenced page: https://shop.prusa3d.com/en/upgrades/179-original-prusa-i3-mk2s-to-mk25s-upgrade-kit.html# Show More

EVO-tech EL-102   We are working on EVO-tech EL-102 post processor and we would be happy to get some feedback from the community. Note that customization might be required in most cases for each specific machine, so please test carefully. Please feel free to download and test it: https://cam.autodesk.com/posts?p=evotech        Show More

Weber DX025 pellet extruder We are working on a Weber DX025 pellet extruder post processor and we would be happy to get some feedback from the community. Note that customization might be required in most cases for each specific machine, so please test carefully. Please feel free to download and test it: https://cam.autodesk.com/posts?p=weber_dx025   Show More

Hi All, we are working on a post processor Electronic Alchemy eForge and would be happy to get some feedback from you before we put it into production. Feel free to download and test this post processor with caution and provide any feedback you might have. Thank you. https://cam.autodesk.com/posts?p=eforge Show More

I've just bought a Bambulabs Carbon X1 printer and would like to print directly from Fusion 360. Does anyone know of a post processor for this machine as they are becoming very popular. Cheers Mike Show More

We are working on a generic post processor for the FlashForge Creator fff printer. We would be happy to get some feedback from you before we put it into production. Feel free to download and test this post processor and provide any feedback you might have. You can download it from the following link. https://cam.autodesk.com/posts?p=flashforge In order to get the machine configuration associated, you can send a private message. You will need a third party utility in rder to convert the file to the x3g format. (for example gpx) Show More