We are working on a generic post processor for the Raise3D fff printers. We would be happy to get some feedback from you before we put it into production. Feel free to download and test this post processor and provide any feedback you might have. If you choose to use it, you assume all inherent risk in using it, and we ask that you proceed with caution. You can download it from the following link. https://cam.autodesk.com/posts?p=raise3d
the associated machine configuration files can be found there
https://cam.autodesk.com/machineslist
you will have to edit the config file, to reset the link with the post processor.
