Thicken multiple sketch line with tube

[ze-adel]

Hi, Im a beginner to fusion 360 and even with IA help I cant figure out how to thicken multiple sketch line with tube.

For example the fantastic 4 logo I cant select the 4 and the circle and apply tube to both of them (I want both tubes to merge together) and I really prefer using tube because I can make them circle or square.

I took this example but I ll do it with various geometry and every time I tried something I have errors.

I send pictures to illustrate what Im saying.

Sorry for my poor english I m not native speaker.

And also I dont know if its useful to know but Im doing this to 3d print.

Thank you in advance for your help.

[davebYYPCU]

Finish the 4 tube.

New one for the circle, change cutting, to Join.

Might help….

[TheCADWhisperer]

@ze-adel 

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

[ze-adel]

Hi, thanks for your answer but when I do it the sketch disapear and I need it, like I said the fantastic 4 logo is an example I need to be able to do it on dozens if not more of geometry like the one in the middle of the last picture I have sent is a piece of a bigger geometry.So I need the sketch to stay I cant redo it after one geometry it ll be a nightmare but thank you for trying to help me.

[kacper.suchomski]

Hi

Attach your file.

[TheCADWhisperer]

@ze-adel 

Right click on the sketch and turn the Visibility back on. 

(You can also set this in your Preferences.)

Attach your file and someone will create a video using your actual geometry.

[davebYYPCU]

Use Sketch Eyeball to turn sketch back on.

In Preferences you can stop turning the sketch off after 1st operation.

Might help...

[ze-adel]

Yes there it is.

[ze-adel]

Ok thanks I didnt know the visibility went off I did that but the edges of the 4 are going out of the circle how do I make it fit in ?

[kacper.suchomski]

Look at this:

[ze-adel]

Yes thanks that went well.

[davebYYPCU]

Adjust the four sketch to be shorter.  It is blue so click drag the corner point.

Might help...

[ze-adel]

This is what I need but I want to be able to select everything at the same time if its not possible I ll need another way to do what I want and also I found this video maybe it can help me but I dont know how to achieve it : https://www.youtube.com/shorts/1kaWQJzO_Vk

[kacper.suchomski]

---

@ze-adel wrote:

This is what I need but I want to be able to select everything at the same time if its not possible I ll need another way to do what I want and also I found this video maybe it can help me but I dont know how to achieve it : https://www.youtube.com/shorts/1kaWQJzO_Vk

---

You can select one loop or broken line at a time.

The video you showed has little to do with the topic described in this thread.

[ze-adel · Accepted solution]

I found another way that work I can draw my shapes then convert png to svg and import it.

Thank you for trying to help and have a good day.