how do i do dxf splines to polylines?

how do i do dxf splines to polylines?

nocturnalwelding
Advocate Advocate
2,668 次查看
28 条回复
1 条消息(共 29 条)

how do i do dxf splines to polylines?

nocturnalwelding
Advocate
Advocate

Hey guys, My laser cutter is asking if i can change splines to polylines? Ive been looking and trying but can't figure it out. I tried to post the dxf but i keep getting a error that the attachment doesn't match the file extention.

thanks. 

0 个赞
2,669 次查看
28 条回复
回复 (28)
2 条消息(共 29 条)

etfrench
Mentor
Mentor

Dxf files need to be zipped in order to attach to the thread.

Try DXF Spline To Polyline from the app store.

 

ETFrench

EESignature

0 个赞
3 条消息(共 29 条)

nocturnalwelding
Advocate
Advocate

How do you zip?

 

0 个赞
4 条消息(共 29 条)

etfrench
Mentor
Mentor

Must be a Mac user 😀  It's compressed file format.

ETFrench

EESignature

5 条消息(共 29 条)

nocturnalwelding
Advocate
Advocate

haha definitely not. Just never had to zip anything before.  

0 个赞
6 条消息(共 29 条)

nocturnalwelding
Advocate
Advocate

added the file. can't believe all you do is right click and send to folder. lol

0 个赞
7 条消息(共 29 条)

g-andresen
Consultant
Consultant

Hi,

try this 

as @etfrench  recommended

 

günther

 

0 个赞
8 条消息(共 29 条)

nocturnalwelding
Advocate
Advocate

trying right now

 

0 个赞
9 条消息(共 29 条)

nocturnalwelding
Advocate
Advocate

Can you guys tell me if the app worked on either of the files. Laser guy said it didn't work on version 1. I tried again and made a version 2. Thank you

0 个赞
10 条消息(共 29 条)

etfrench
Mentor
Mentor

Both files opened fine in my 2d CAD program which also can't handle Fusion 360 splines.  What error is the laser man getting?  Can he take a screenshot of the failure?

ETFrench

EESignature

11 条消息(共 29 条)

nocturnalwelding
Advocate
Advocate

he's using solidworks and says it has facets or nodes and the laser cutter will stop at each one. Here's a pic of his computer. 

0 个赞
12 条消息(共 29 条)

etfrench
Mentor
Mentor

Can you export as step file?  Solidworks can handle that. 

ETFrench

EESignature

13 条消息(共 29 条)

nocturnalwelding
Advocate
Advocate

Tried that already. He said it won't be smooth curves. Thank you. 

0 个赞
14 条消息(共 29 条)

nocturnalwelding
Advocate
Advocate

I even wrote a plasma program in fusion and posted it out as a dxf to see if it would work, and no go. The cnc program was good, all the cuts where smooth. Wish I had a table big enough, I would cut it myself.

0 个赞
15 条消息(共 29 条)

etfrench
Mentor
Mentor

Try exporting a dwg file using the original splines.  Solidworks can theoretically import those.

ETFrench

EESignature

16 条消息(共 29 条)

nocturnalwelding
Advocate
Advocate

Ok, I'll give it a go and see what he says tomorrow. Thank you.

0 个赞
17 条消息(共 29 条)

mango.freund
Advisor
Advisor

hi, there is a helpfull app also

https://www.youtube.com/watch?v=ji64aYVEK7c&t=97s

 

lg mango

18 条消息(共 29 条)

nocturnalwelding
Advocate
Advocate

Ok, the dwg didn't work. He recommends tracing over it or importing into autocad and exporting out with polylines cconverted. Here's a email from him with a pic of the error.

 

See attached it’s the same issue as yesterday. Tell the guys in the forum to open them up or click on the lines there all segmented. I can cut it like this if you like. If you want clean arcs then it will need to be modified. To show that. what you see in this image is what you will get.

 

 

0 个赞
19 条消息(共 29 条)

nocturnalwelding
Advocate
Advocate

I ran dxf to polysplines again.It's kinda wierd in the fact that it will run forever if you let it, but as soon as you hit ok then it stops running. Just makes me wonder if it actually converted it. I let it go for 2hrs.

0 个赞
20 条消息(共 29 条)

nocturnalwelding
Advocate
Advocate

Just checked with my buddy who has solidworks and you can see all the nodes.

 

0 个赞