help with drawing a leg

[Anonymous]

new to fusion and haven't used sculpt trying to design a leg to use with furniture hopefully image has uploaded please give me some tips..

[etfrench]

For that shape, using the Revolve command would be easiest.

[g-andresen]

Hi Jason,

This is the way of etfrench, using the image.

günther

[Anonymous]

Yea I thought that but it needs to shape in at the back not the out

[SaeedHamza]

Go to the sculpt environment and start with a box

set the view to front, side or top, whatever you need, and then use the edit form tool to get to your shape

I recommend you use the attached picture as a canvas

[etfrench]

Can you explain that better.  Section drawings at the bottom, middle, and top would help.

[Anonymous]

What do you mean sorry

[etfrench]

Your image only shows the side profile of the leg.  What are the profiles looking down from the top?

[Anonymous]

see attached image bottom of leg and top of leg

[Anonymous]

all image I have off leg its 400mm long 

[g-andresen]

Hi Jason,

here is a model to play with.

have fun

günther

[Anonymous]

thank you so much günther.

is it is to do a video sometime on how this was made for any other ones.

I need to learn a lot

Much appreciated

[g-andresen]

Hi Jason,

Here is another variant, which is a bit clearer for the beginning.

Activate the edit mode of the loftfeature in the timeline.

You will see what the centerline does when you turn it off and on again.

Evenso you can edit the distances of the planes.

good succeed

günther

Here is a small overview of the attached file.

[Anonymous]

thank you that's brilliant just need to work out how you got that all to join with centreline and all your sketches. also where do I activate sketch pallet