Solved: Re: warning alert for alignments

Anonymous · ‎02-13-2012

How do I turn off the warning CIV3D puts in my drawing when a alignment doesn't meet certain criteria? Its shaped like a triangle with an exclamation point inside of it.

ToddRogers-WPM · ‎02-13-2012

Go to your Alignment Properties, on the Design Criteria tab, uncheck Check for tangency between elements.

Todd Rogers

Jeff_M · ‎02-13-2012

Alignment Style Display tab

Jeff_M, also a frequent Swamper

ToddRogers-WPM · ‎02-13-2012

Or what Jeff_M says...turn off the Warning Symbol in your Alignment style.

Todd Rogers

neilyj666 · ‎02-13-2012

Go into the style and turn off the layer and if you want/don't want them printed it's in Options

neilyj (No connection with Autodesk other than using the products in the real world)
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

AEC Collection 2025 UKIE (mainly Civil 3D UKIE and IW)
Win 11 Pro x64, 1Tb Primary SSD, 1Tb Secondary SSD
64Gb RAM Intel(R) Xeon(R) W-11855M CPU @ 3.2GHz
NVIDIA RTX A5000 16Gb, Dual 27" Monitor, Dell Inspiron 7760

Anonymous · ‎02-14-2012

thanks everybody, big help

Anonymous · ‎08-17-2016

How do you turn off a triangle with a dot in center on your alignment?

ToddRogers-WPM · ‎08-17-2016

The answer is above as Solved.

Todd Rogers

Anonymous · ‎10-03-2017

Thanks!!!

kayci.reynolds · ‎10-25-2022

The above steps did not work for me.

To turn off the red triangle at the end of the alignment.

Choose Alignment properties>summary tab>+Marker> choose <none>

ToddRogers-WPM · ‎10-25-2022

This post isn't about the red triangle at the end of an alignment. It's about the warning symbols.

Todd Rogers

kayci.reynolds · ‎10-25-2022

If you read a few comments above you'll see a question asked "How do you turn off a triangle with a dot in center on your alignment?" asked and answered!

ToddRogers-WPM · ‎10-25-2022

Gotcha.

Todd Rogers