Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I was reviewing a corridor I've been putting together for the past couple of days and realized I forgot to switch some of the assembly from a 6" curb to a 4" mountable curb. I went to swap the assembly in the corridor property and it gave me the error on screen. I figured the baselines for the intersection curb return was not allowing me to update the assembly, so I deleted the baselines and with them the regions for the curb return. Rebuilt the corridor, try to change the assembly and still the same error appears.
The error says the start and end station for those regions is both 0+00. In the corridor parameters change the end station for those regions from 0+00 to the end station value. If you need to you can post a dwg file for someone to look at.
