Dimension text upside down

[bidhin_patel]

My UCS also moves while I am dimensioning. I don't remember if it was happening before but I don't want it. 

Please Help.

Thank You

[pendean]

Set the commands UCS and PLAN to WORLD first, then find out what is truly going on in your file.

[bidhin_patel]

Did still the same

[pendean]

Restart your PC @bidhin_patel 

Open an all new blank DWG file, draw and dimension in there: is the issue still present? I suspect not, but you'll have to confirm.

HTH

[bidhin_patel]

It is happening because when i select points, new axis guides dimension text where to display @pendean 

[h_s_walker]

Your UCS is still upside down. The Y in your first picture should be above the line not below.

[pendean]

---

@bidhin_patel wrote:

...It is happening because when i select points, new axis guides dimension text where to display @pendean 

---

Once your UCS looks like this (see below) in a new file (or your current one), your issue will go away, see tips I already provided to get there

HTH

[bidhin_patel · Accepted solution]

It is solved i by mstake clicked on DUCS.

[pendean]

---

@bidhin_patel wrote:

It is solved i by mstake clicked on DUCS.

---

Which year version (and actual AutoCAD version) are you using please? ABOUT command in the program will confirm your software. You appear to be in the wrong forum at least.