I just recently installed AutoCAD 2019 and every time I switch from Model to Layout Space the ribbon switches to the Layout tab on the Ribbon. I then went into my CUI and attempted to switch it from "Full with Focus" to "Full without Focus". When I got in there, the "Full without Focus" option was already listed. How do I actually get it to stop switching to the Layout Tab on my Ribbon if it already thinks it is doing it?
Thanks!
Solved! Go to Solution.
Solved by EBSPEAMD. Go to Solution.
Solved by Alfred.NESWADBA. Go to Solution.
Hello @EBSPEAMD,
It seems you are trying to customize your Toolbar, you can do this from the "Manage' Tab > "CUI User Interface".
Then "Toolbars" > "Layout" click apply.
Please "Accept Solution" if a reply or replies have helped resolve the issue or answered your question, to help others in the community.
Natasha
Community Product Support Specialist
Helpful Links:
AutoCAD Videos | AutoCAD Crashes or Freezes | AutoCAD Customer Council | AutoCAD System Requirements | Prepare your computer for download | Autodesk Virtual Agent | Clean Uninstall | Steps for Setting-Up Student Software
Hi natashal84,
It's the Ribbon, but thanks for the suggestion. You know at first, when you select your Xref and the ribbon switches from the home tab to the external references tab? It's basically doing the same thing but when I switch between the model space and the paper space and it switches to "Layout" tab from the "Home" Tab.
I followed Option #2 in the following link:
My attempt at clicking on the "Full without Focus" doesn't work inside the CUI interface because AutoCAD is claiming that its already doing that - which it definitely isn't.
Thanks!
Hi pendean,
No, that doesn't help. When I switch to paper space from model space, the ribbon tab switches from home to layout. At this point, I'd be better off uninstalling and reinstalling it. My guess is that the migration of my AutoCAD 2013 info into 2019 messed this up somehow.
I installed 2019 at home and when I migrated my 2017 info over, the problem doesn't exist. So I really don't know what to do.
Before you reinstall, try doing a "repair". It's quicker and might fix your issue with less effort.
Thanks BrianBenton.
Repair did not fix it. So I tried something which surprised me.
If I go Options > Profiles > and I select the AutoCAD 2019 profile. The problem goes away. The migrated profile seems to be the issue. Why would it work fine on one profile but not the other?
Maybe you want to check out the "FILETABTHUMBHOVER" system variable... see below.
https://forums.autodesk.com/t5/autocad-forum/how-to-turn-off-file-tab-hover-preview/td-p/6346443
Hi s.borello,
That didn't work either. I think somehow in the migration that part must have gotten corrupted. I'm going to try and match the settings in my other profile and then just use the 2019 profile instead of the migrated one. Otherwise I have to uninstall and reinstall.
Hi,
as far as I can see from your initial screenshot I would say "Full without focus" is the correct setting ... and yes, when switching to layout it should appear, the tab layout should not be made active.
It might help change the setting to "Full with focus", save in CUI dialog, test if it's working, close and reopen AutoCAD and change the setting back (to "Full without focus") and again close and reopen AutoCAD.
If that does not work, could it be possible that you had migrated settings when you first started AutoCAD?
Or do you have a setup where enterprise menu's are active or anyone else created a modified ACAD.CUIX in the UserDataCache folder which is used then whenever a user starts AutoCAD for the first time?
My next step would be to start command _CUI, right click the main cui and reset it, so you only need to recreate the workspaces.
HTH, - alfred -
Hi Alfred.NESWADBA,
This looks intriguing. Since I'm not at the office, I will give it a shot on Monday. The issue also happened to my boss and one of my coworkers so I uninstalled and reinstalled the software (just as they did and will avoid the migration unless you think I should try the migration and your idea). If it occurs again then hopefully your solution will offer something I can do.
Thanks!
OK so it seems the uninstall/reinstall fixed the problem. The migration of the 2013 profiles and CUI must have messed things up. Thank you everyone for trying!
Can't find what you're looking for? Ask the community or share your knowledge.