Community
Maybe a wrong scale factor?
A sample dwg would be helpful for us to find the cause.
cadder
Jürgen Palme
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Upload a .dwg please.
cadder
Jürgen Palme
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Click on your hatch, then in properties palette, change the scale of the hatch. Change it to something small, e.g. 0.1 or 0.01. Or change to a large value, e.g. 100 or 1000.
Chicagolooper
@ChicagoLooperschrieb:Click on your hatch, then ...
Hmm, 21554939 wrote:
"My hatching does not show at all in my drawing" 😞
I guess he/she must use other "tricks" (e.g. qselect), but without an example drawing it's hard to give a good tip.
cadder
Jürgen Palme
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Hi and Welcome to AutoCAD Forum,
>> My hatching does not show at all in my drawing. <<
you may need to check your layers status , try to turn ON ( LAYON ) and / or thaw all layers ( LAYTHW ) and see if any changes .
Regards,
Imad Habash
Forums Links
Can't find what you're looking for? Ask the community or share your knowledge.
Post to forums
