Command line : Specify opposite corner or [Fence/WPolygon/CPolygon]: why ?

[Anonymous]

Command line always says "specify opposite corner"
Good day, i've been working ith my autocad, and in the last 2 days, the command line says "specify opposite corner", eventhou i haven't selected a command, so i don't know why that legend appears, could you help me to solve this because its really anoying, and i can't work really good

[jayhar]

Hi @Anonymous 

Similar Post Click Here

Please Mark the Post or Posts as Solution(s) to help others find the answer quickly. If your issue persists,

Please give me a bit more detail on this issue so we can continue to work towards getting this solved.

AutoCAD Certified Professional

Thanks You
JAYHAR.M.J

Asst: Team Leader

Helpful Links: Prepare your computer for download |  Autodesk Virtual Agent | Clean Uninstall | AutoCAD randomly crashes or freezes

[j.palmeL29YX]

Deselect "Implied Windowing". (see pic)

[imadHabash · Accepted solution]

Hi and Welcome to AutoCAD Forum,

is there any outsource plug-ins or lisps that installed ? you may need to check that . 

Regards,

[Anonymous · Accepted solution]

thank you so much ! I will check it !

[j.palmeL29YX]

Would you please tell us more detailed what caused your problem and how did you solve it? It will help others with the same issue in the future.

THX

[Kent1Cooper]

---

@Anonymous wrote:

... the command line says "specify opposite corner", eventhou i haven't selected a command....

---

That's what happens when you pick a point in open space with no command active.  It assumes you are selecting things in noun-verb operation with a window of some kind.  If this is only first thing  in any drawing, and if you are not  picking yourself, something must be triggering the equivalent of a mouse pick when you open a drawing.  It's possible you just have a faulty mouse that's sending out a pick signal unintended somehow -- try a different one.

[Anonymous]

Thank you very much for helping me! I will learn about it!

[hadarshaul9]

Hi

I have this problem also !

I cant change it ..!

How can i cancel it??

please help me

[imadHabash]

Hi,

it will be nice if you make a new post and show us a screenshot for what you see in CAD screen ? 

[Anonymous]

me too! can you help me?

[mwieczorek84DJB]

Hello everyone, I had the same problem you all described. In addition my zoom/pan felt different too ... . However in others files all worked just fine.
Then I checked the ViewCube -> RightClick : In someway it was set to perspective. I changed to parralel as in my other files. All back to normal :).
Hope it works for you guys.

[harshit_gajjar]

it is because you have another overlapping or empty viewport, simply delete those extra viewports to fix your issue. 

[radhikaKPGRM]

Hello, I have been facing this same situation past 1 week, checked everywhere but no answers i received. it will be so much thankful someone please address this issue and troubleshoot this. 

Many Thanks!

@radhikaKPGRM - this post is being edited to remove PII.

[pendean]

---

@radhikaKPGRM wrote:

Hello, I have been facing this same situation past 1 week...

---

So what changed with your PC or software in the last week?
Did your restart your PC yet?

Is your AutoCAD fully updated? We will need to see proof, a screenshot of your ABOUT command is a good place to start.