Community
AutoCAD Electrical Forum
Welcome to Autodesk’s AutoCAD Electrical Forums. Share your knowledge, ask questions, and explore popular AutoCAD Electrical topics.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Modify symbol library not working (ACADE 2018)...

23 REPLIES 23
Back to AutoCAD Electrical Category
Back to Topic Listing
Reply
Message 1 of 24
Anonymous
1596 Views, 23 Replies
‎01-08-2018 09:21 AM
‎01-08-2018 09:21 AM

Modify symbol library not working (ACADE 2018)...

It seems I can't seem to get the Modify Symbol Library to work.  It locks up on the first drawing at this point....(see pic)

Capture.JPG

Any ideas?

Report
0 Likes
Reply
23 REPLIES 23
Message 2 of 24
rhesusminus
Mentor
in reply to: Anonymous
‎01-08-2018 09:35 AM
‎01-08-2018 09:35 AM

Seems like there's something strange with the text style WD in that symbol. If you remove that first symbol, will it work for the rest of the symbols? Are these all custom symbols?

Trond Hasse Lie
EPLAN Expert and ex-AutoCAD Electrical user.
Ctrl Alt El
Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
Report
0 Likes
Reply
Message 3 of 24
Anonymous
in reply to: rhesusminus
‎01-08-2018 09:49 AM
‎01-08-2018 09:49 AM

No custom symbols at all. All out of the box...Probably of note: I had just installed ACADE 2018 and have only set up the top support path to point to my wd.env file.  No other modifications yet to the 2018 version.

Report
0 Likes
Reply
Message 4 of 24
rhesusminus
Mentor
in reply to: Anonymous
‎01-08-2018 02:34 PM
‎01-08-2018 02:34 PM

Ok.
I just saw the "J:\Design Internal" etc. path.
What are your settings for this modification?

2018-01-08_23-34-28.png


Trond Hasse Lie
EPLAN Expert and ex-AutoCAD Electrical user.
Ctrl Alt El
Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
Report
0 Likes
Reply
Message 5 of 24
Anonymous
in reply to: rhesusminus
‎01-09-2018 11:03 AM
‎01-09-2018 11:03 AM

Capture.JPG

Report
0 Likes
Reply
Message 6 of 24
rhesusminus
Mentor
in reply to: Anonymous
‎01-09-2018 01:28 PM
‎01-09-2018 01:28 PM

What is the first symbol it opens?
And, aren't these custom symbols, the 82 blocks in the _CI-symbols folder?

Trond Hasse Lie
EPLAN Expert and ex-AutoCAD Electrical user.
Ctrl Alt El
Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
Report
Reply
Message 7 of 24
Anonymous
in reply to: rhesusminus
‎02-15-2018 08:28 AM
‎02-15-2018 08:28 AM

Apologies for the late reply.  These are direct copies from the NFPA default symbol library, so at the moment I am running the modify library they are not custom symbols.  Still not sure why it works in ACADE 2017, but not in ACADE 2018.

Report
0 Likes
Reply
Message 8 of 24
rhesusminus
Mentor
in reply to: Anonymous
‎02-18-2018 03:25 PM
‎02-18-2018 03:25 PM

What if you rename that folder from "_ci-symbols" to "cisymbols" ?

Trond Hasse Lie
EPLAN Expert and ex-AutoCAD Electrical user.
Ctrl Alt El
Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
Report
Reply
Message 9 of 24
Anonymous
in reply to: rhesusminus
‎02-20-2018 09:00 AM
‎02-20-2018 09:00 AM

Currently there are others who rely on that particular folder to maintain its current name.  Once I get a chance to test changing the folder name I'll do so and update.

Report
0 Likes
Reply
Message 10 of 24
rhesusminus
Mentor
in reply to: Anonymous
‎02-20-2018 04:21 PM
‎02-20-2018 04:21 PM

Or... Just copy the contents of that folder into another folder.

Trond Hasse Lie
EPLAN Expert and ex-AutoCAD Electrical user.
Ctrl Alt El
Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
Report
Reply
Message 11 of 24
jesusrperezd
Contributor
in reply to: rhesusminus
‎08-10-2022 11:56 AM
‎08-10-2022 11:56 AM

I am still having the same problem, I am running ACADE 2020, any suggestion?

Report
0 Likes
Reply
Message 12 of 24
rhesusminus
Mentor
in reply to: Anonymous
‎08-10-2022 12:58 PM
‎08-10-2022 12:58 PM

And, you have the EXACT same problem, with the EXACT same texts on the command line?

f not, maybe fill in a little bit more information.

See the rest of the thread for questions asked.


Trond Hasse Lie
EPLAN Expert and ex-AutoCAD Electrical user.
Ctrl Alt El
Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
Report
0 Likes
Reply
Message 13 of 24
jesusrperezd
Contributor
in reply to: Anonymous
‎08-10-2022 01:09 PM
‎08-10-2022 01:09 PM

Hi, yes. The problem results when I try to modify the library with a .shx font. If I select a .ttf font the routine runs with success.

 

The script stops and asks me for modifying some text to vertical or horizontal, when I select any of them it stops.

 

Thanks

-------------------


Opening an AutoCAD 2013/LT 2013 format file.
Regenerating model.


AutoCAD menu utilities loaded.
AutoCAD Electrical menu utilities loaded.
Command:

Autodesk DWG. This file is a TrustedDWG last saved by an Autodesk application or Autodesk licensed application.

Command:

Command:
Command:
Command: (COMMAND-S "_.SCRIPT" "C:/Users/JP/AppData/Local/Temp/ace287B.scr")
_.SCRIPT
Enter script file name <C:\users\jp\desktop\a-b\HPB12ML.scr>: C:/Users/JP/AppData/Local/Temp/ace287B.scr nil

Command: _.ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: _EXTENTS

Command: wd_scr_msg "========== Drawing 1 of 2 =========="

Command:
Command: wd_sym_wdlib_doit
_.ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: _EXTENTS
TAG1 height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style. Full font name = AMGDT
Specify font name or font filename (for SHX) <AMGDT>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>: wd_scr_qsave3

Yes or No, please.
Vertical? [Yes/No] <No>: *Cancel*
Vertical? [Yes/No] <No>: *Cancel*
Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

DESC1 height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

DESC2 height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

DESC3 height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

CATDESC height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

XREF height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

TERM01 height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

TERM02 height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

COMMON height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

Command:
Command:

Command: WD_SYM_WDLIB_DOIT
_.ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: _EXTENTS
TAG1 height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

INST height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

LOC height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

DESC1 height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

DESC2 height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

DESC3 height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

CATDESC height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

XREF height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

TERM01 height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

TERM02 height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

COMMON height=1.7500
_.style Enter name of text style or [?] <WD_IEC>: WD_IEC
Existing style.
Specify font name or font filename (for SHX) <romans.shx>: romans.shx Specify height of text or [Annotative] <4.0000>: Specify width factor <0.9000>:
Specify obliquing angle <0>: Display text backwards? [Yes/No] <No>: Display text upside-down? [Yes/No] <No>: Vertical? [Yes/No] <No>: Vertical? [Yes/No] <No>:
"WD_IEC" is now the current text style.

Preview file
104 KB
Report
0 Likes
Reply
Message 14 of 24
rhesusminus
Mentor
in reply to: Anonymous
‎08-10-2022 01:52 PM
‎08-10-2022 01:52 PM

Can you share the two files you have in this folder?


Trond Hasse Lie
EPLAN Expert and ex-AutoCAD Electrical user.
Ctrl Alt El
Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
Report
Reply
Message 15 of 24
jesusrperezd
Contributor
in reply to: Anonymous
‎08-10-2022 01:54 PM
‎08-10-2022 01:54 PM

sure, I picked them randomly from the library folder.

AT_HC_DS.dwg
HPB12ML.dwg
Report
0 Likes
Reply
Message 16 of 24
rhesusminus
Mentor
in reply to: Anonymous
‎08-10-2022 02:00 PM
‎08-10-2022 02:00 PM

Hmm... No, works here. How about a screenshot of your settings?


Trond Hasse Lie
EPLAN Expert and ex-AutoCAD Electrical user.
Ctrl Alt El
Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
Report
Reply
Message 17 of 24
jesusrperezd
Contributor
in reply to: rhesusminus
‎08-10-2022 06:31 PM
‎08-10-2022 06:31 PM

You meant the attached file, right? I added a video so you can see it all.

Preview file
109 KB
Preview file
3106 KB
Report
0 Likes
Reply
Message 18 of 24
rhesusminus
Mentor
in reply to: Anonymous
‎08-10-2022 11:27 PM
‎08-10-2022 11:27 PM

I don't have version 2020 installed any longer, and it works for release 2023 where I'm at. 
I'm all out of ideas on what this could be.


Trond Hasse Lie
EPLAN Expert and ex-AutoCAD Electrical user.
Ctrl Alt El
Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
Report
0 Likes
Reply
Message 19 of 24
jesusrperezd
Contributor
in reply to: rhesusminus
‎08-11-2022 05:34 AM
‎08-11-2022 05:34 AM

It's ok, thanks for checking this out. I did the modification with the .TTF font, I supposed I got the same results, so this could be an alternative to go with.

Report
0 Likes
Reply
Message 20 of 24
rhesusminus
Mentor
in reply to: Anonymous
‎08-11-2022 06:12 AM
‎08-11-2022 06:12 AM

All this being said...

Why would you want to do this?
If you just change the font used by the WD and WD_IEC text styles in your drawings/templates, the symbols will use that font instead.

 

And, in my opinion, it's always good to use TrueType fonts. Then you don't need to worry about fonts changing when publishing to PDF and font substitution, and you will then get searchable PDFs 🙂


Trond Hasse Lie
EPLAN Expert and ex-AutoCAD Electrical user.
Ctrl Alt El
Please select "Accept Solution" if this post answers your question. 'Likes' won't hurt either. 😉
Report
0 Likes
Reply
Reply

Forums Links

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

Report a website issue