3 pipes joint

[votuananhvungtau]

I have a 3 pipes connection as below:Picture-1

I use the Element Contour - Rule but it is created a understate - wrong profile as below:Picture-2

Can anyone help me ?

Thank you so much !

[votuananhvungtau]

I have a 3 pipes connection as below:Picture-1

I use the Element Contour - Rule but it is created a understate - wrong profile as below:Picture-2

Can anyone help me ?

Thank you so much !

[Sebastian_Eiche · Accepted solution]

this is working with element contour. I made a screencast for you: https://autode.sk/2AOAK9l

[Sebastian_Eiche · Accepted solution]

this is working with element contour. I made a screencast for you: https://autode.sk/2AOAK9l

[votuananhvungtau]

Thank you so much Mr. Sebastian_Eiche, you are right !

Element Contour - UCS can do that. Element Contour - Rule only use for 2 pipe connection. 

[votuananhvungtau]

Thank you so much Mr. Sebastian_Eiche, you are right !

Element Contour - UCS can do that. Element Contour - Rule only use for 2 pipe connection.