Insert Drawing Borders with Title Block??

Insert Drawing Borders with Title Block??

Anonymous
Not applicable
293 Views
3 Replies
Message 1 of 4

Insert Drawing Borders with Title Block??

Anonymous
Not applicable
Hi,

I know this is a Mcad-errand, but maybe someone know something about
this.....

Is it possible to insert a drawing border with titlte block using VBA in
Mechanical 6?
Any suggestion how??

Regards
Rikard
0 Likes
294 Views
3 Replies
Replies (3)
Message 2 of 4

Anonymous
Not applicable
Rikard,

Either use the INSERT method to insert the drawing that has the title block
or
Open a NEW document using the desired template (which has the title block).

Cheers,
Thilak


"Rikard Nilsson" wrote in message
news:E2FB7A45DB445DFE0CFADA4F77BF1924@in.WebX.maYIadrTaRb...
> Hi,
>
> I know this is a Mcad-errand, but maybe someone know something about
> this.....
>
> Is it possible to insert a drawing border with titlte block using VBA in
> Mechanical 6?
> Any suggestion how??
>
> Regards
> Rikard
>
>
0 Likes
Message 3 of 4

Anonymous
Not applicable
Ohhh.. That wasn't good...
I had hoped for something better, because that will cause problems then we
talk about scale areas and stuff that are dependent of drawing borders in
M6....
But thanks anyway for your quick answer...

Do you have any idea how to set the "Model Scale-factor" in Mechanical
Options? I know it's a variable but I can't remember which..

/Rikard


"Thilak" skrev i meddelandet
news:35A5C973236396783CD1AB7A92E1F077@in.WebX.maYIadrTaRb...
> Rikard,
>
> Either use the INSERT method to insert the drawing that has the title
block
> or
> Open a NEW document using the desired template (which has the title
block).
>
> Cheers,
> Thilak
>
>
> "Rikard Nilsson" wrote in message
> news:E2FB7A45DB445DFE0CFADA4F77BF1924@in.WebX.maYIadrTaRb...
> > Hi,
> >
> > I know this is a Mcad-errand, but maybe someone know something about
> > this.....
> >
> > Is it possible to insert a drawing border with titlte block using VBA
in
> > Mechanical 6?
> > Any suggestion how??
> >
> > Regards
> > Rikard
> >
> >
>
>
0 Likes
Message 4 of 4

Anonymous
Not applicable
I found it myself... It's AMSYMSCALE

/Rikard


"Rikard Nilsson" skrev i meddelandet
news:11124B5305CACA37EE9C40DF8CE9061E@in.WebX.maYIadrTaRb...
> Ohhh.. That wasn't good...
> I had hoped for something better, because that will cause problems then we
> talk about scale areas and stuff that are dependent of drawing borders in
> M6....
> But thanks anyway for your quick answer...
>
> Do you have any idea how to set the "Model Scale-factor" in Mechanical
> Options? I know it's a variable but I can't remember which..
>
> /Rikard
>
>
> "Thilak" skrev i meddelandet
> news:35A5C973236396783CD1AB7A92E1F077@in.WebX.maYIadrTaRb...
> > Rikard,
> >
> > Either use the INSERT method to insert the drawing that has the title
> block
> > or
> > Open a NEW document using the desired template (which has the title
> block).
> >
> > Cheers,
> > Thilak
> >
> >
> > "Rikard Nilsson" wrote in message
> > news:E2FB7A45DB445DFE0CFADA4F77BF1924@in.WebX.maYIadrTaRb...
> > > Hi,
> > >
> > > I know this is a Mcad-errand, but maybe someone know something about
> > > this.....
> > >
> > > Is it possible to insert a drawing border with titlte block using VBA
> in
> > > Mechanical 6?
> > > Any suggestion how??
> > >
> > > Regards
> > > Rikard
> > >
> > >
> >
> >
>
>
0 Likes