VBA loads - API

Anonymous · ‎11-18-2011

I create a sub which define loads on a pannel but it's doesn't work.

Can you have a look ?

Public typecharge As String
Public casdecharge As String
Public valeurcharge As Double
Public x_1 As Double
Public y_1 As Double
Public z_1 As Double
Public x_2 As Double
Public y_2 As Double
Public z_2 As Double
Public x_3 As Double
Public y_3 As Double
Public z_3 As Double
Public x_4 As Double
Public y_4 As Double
Public z_4 As Double

Public Sub charges()
'trotoirs
typecharge = I_CN_PERMANENT
casdecharge = "Equipements"
valeurcharge = 5.5
x_1 = 0.000
y_1 = 0.000
z_1 = 0.000
x_2 = 75.480
y_2 = 0.000
z_2 = 0.000
x_3 = 76.143
y_3 = 1.600
z_3 = 0.000
x_4 = 0.663
y_4 = 1.600
z_4 = 0.000
Call chargement_panneau_contour

End Sub

Sub chargement_panneau_contour()

    Dim cas As RobotSimpleCase
    Dim recs As RobotLoadRecordMngr
    Dim rec_1 As RobotLoadRecordInContour
    Set cas = robapp.Project.Structure.Cases.CreateSimple(robapp.Project.Structure.Cases.FreeNumber, _
casdecharge, typecharge, I_CAT_STATIC_LINEAR)
    Set recs = cas.Records
    
' pression uniforme horizontale appliquée au contour
' définition des contours
    i = recs.New(I_LRT_IN_CONTOUR)
    
' création d'une nouvel enregistrement
    Set rec_1 = recs.Get(i)
    
' définition du plan de charge
    rec_1.Objects.FromText "1"
    rec_1.SetValue I_ICRV_PX1, 0
    rec_1.SetValue I_ICRV_PY1, 0
    rec_1.SetValue I_ICRV_PZ1, -valeurcharge
    rec_1.SetValue I_ICRV_PX2, 0#
    rec_1.SetValue I_ICRV_PY2, 0#
    rec_1.SetValue I_ICRV_PZ2, -valeurcharge
    rec_1.SetValue I_ICRV_PX3, 0#
    rec_1.SetValue I_ICRV_PY3, 0#
    rec_1.SetValue I_ICRV_PZ3, -valeurcharge
    
    ' sens de projection des efforts
    rec_1.SetValue I_ICRV_PROJECTION, 1

    ' nombre de points composant le contour
    rec_1.SetValue I_ICRV_NPOINTS, 4
    rec_1.SetValue I_ICRV_LOCAL, 0

    ' définition des points sur le panneau
    rec_1.SetPoint 1, 0, 0, 0
    rec_1.SetPoint 2, 1, 1, 0
    rec_1.SetPoint 3, 1, 0, 0

    rec_1.SetContourPoint 1, x_1, y_1, z_1
    rec_1.SetContourPoint 2, x_2, y_2, z_2
    rec_1.SetContourPoint 3, x_3, y_3, z_3
    rec_1.SetContourPoint 4, x_4, y_4, z_4
    
    rec_1.SetVector 0, 0, 1

    Set recs = Nothing
    Set rec_1 = Nothing
    Set cas = Nothing
  
End Sub

Anonymous · ‎11-18-2011

For the

 rec_1.SetValue I_ICRV_PZ1, valeurcharge * 1000

Problem solved (it's because I had to multiply by 1000)

For the selection of panels

My problem is that it's not a selection automatic (of panels).

I think the command I need it's like

rec_1.Objects.???? 'automatic

Rafal.Gaweda · ‎11-18-2011

Some bugs should be corected as shown below :

Public typecharge As Integer

Sub chargement_panneau_contour()

Set RobApp = New RobotApplication ' or activate somewhere else robotapplication

rec_1.Objects.FromText "30to36"

Rafal Gaweda

Rafal.Gaweda · ‎11-18-2011

@Anonymous wrote:

For the
 rec_1.SetValue I_ICRV_PZ1, valeurcharge * 1000
Problem solved (it's because I had to multiply by 1000)

Keep in mind - you are using SI units (N,m) in API dirrectly

For the selection of panels

My problem is that it's not a selection automatic (of panels).

I think the command I need it's like

rec_1.Objects.???? 'automatic

only: rec_1.Objects.FromText "all"

/ if french robot version used please use french text syntax: rec_1.Objects.FromText "tous"

ALL selects all objects

Rafal Gaweda

Anonymous · ‎11-21-2011

Ok thank you,

I have 3 combinations number 20 21 22 and I want to have the max and the min of moments :

for example Mxx+ and Myy-

example

What is the code to display it ?

Anonymous · ‎11-22-2011

up

Rafal.Gaweda · ‎11-22-2011

Display on Map or just find to have it for further use?

Rafal Gaweda

Anonymous · ‎11-22-2011

Display on map please

Rafal.Gaweda · ‎11-22-2011

Unfortunatelly it is not posible to dispplay only max \ min on map thru API

mavueRobot.ParamsFeMap.WithDescription = True ' this is the only one settings for maps description

Rafal Gaweda

Anonymous · ‎11-22-2011

Can we select many combinations in the same time and ask for a display of Mxx+ for example ?

It will display the maximum normally ?

Rafal.Gaweda · ‎11-23-2011

mavueRobot.Selection.Get(I_OT_CASE).FromText ("101")

write here selection (list) of cases

Rafal Gaweda

Anonymous · ‎11-23-2011

Is it possible to write this and ask MXX+?

Ps : Can you answer to my message on your private box?

mavueRobot.Selection.Get(I_OT_CASE).FromText ("101 102 103")

Rafal.Gaweda · ‎11-24-2011

mateaus wrote:

Is it possible to write this and ask MXX+?

As a default top envelope is displayed automatically

Ps : Can you answer to my message on your private box?

Answered

Rafal Gaweda

Anonymous · ‎02-24-2012

I would like to create a load on a line on my slab like :

linear load

I would like the same macro like this one but in order to create a linear load

Sub chargement_panneau_contour()
 
'définit les cas de charges
Dim Loads As RobotCaseServer
Set Loads = robapp.Project.Structure.Cases

    Dim cas As RobotSimpleCase
    Dim recs As RobotLoadRecordMngr
    Dim rec_1 As RobotLoadRecordInContour
    Set cas = Loads.Get(nocasdecharge)
'creer un nouveau cas :
'    Set cas = robapp.Project.Structure.Cases.CreateSimple(robapp.Project.Structure.Cases.FreeNumber, _
casdecharge, typecharge, I_CAT_STATIC_LINEAR)
    Set recs = cas.Records
    
' pression uniforme horizontale appliquée au contour
' définition des contours
    i = recs.New(I_LRT_IN_CONTOUR)
    
' création d'une nouvel enregistrement
    Set rec_1 = recs.Get(i)
    
' définition du plan de charge
rec_1.Objects.FromText "tous"
    rec_1.SetValue I_ICRV_PX1, 0
    rec_1.SetValue I_ICRV_PY1, 0
    rec_1.SetValue I_ICRV_PZ1, -valeurcharge * 1000
    rec_1.SetValue I_ICRV_PX2, 0#
    rec_1.SetValue I_ICRV_PY2, 0#
    rec_1.SetValue I_ICRV_PZ2, -valeurcharge * 1000
    rec_1.SetValue I_ICRV_PX3, 0#
    rec_1.SetValue I_ICRV_PY3, 0#
    rec_1.SetValue I_ICRV_PZ3, -valeurcharge * 1000
    
    ' sens de projection des efforts
    rec_1.SetValue I_ICRV_PROJECTION, 1

    ' nombre de points composant le contour
    rec_1.SetValue I_ICRV_NPOINTS, 4
    rec_1.SetValue I_ICRV_LOCAL, 0

    ' définition des points sur le panneau
    rec_1.SetPoint 1, 0, 0, 0
    rec_1.SetPoint 2, 1, 1, 0
    rec_1.SetPoint 3, 1, 0, 0

    rec_1.SetContourPoint 1, x_1, y_1, z_1
    rec_1.SetContourPoint 2, x_2, y_2, z_2
    rec_1.SetContourPoint 3, x_3, y_3, z_3
    rec_1.SetContourPoint 4, x_4, y_4, z_4
    
    rec_1.SetVector 0, 0, 1

    Set recs = Nothing
    Set rec_1 = Nothing
    Set cas = Nothing
  
End Sub

Can you help me ?

Rafal.Gaweda · ‎02-27-2012

Adjust this code :

Dim cas As RobotSimpleCase
Dim recs As RobotLoadRecordMngr
Dim rec_1 As RobotLoadRecordLinear3D

Set cas = robapp.Project.Structure.Cases.CreateSimple(robapp.Project.Structure.Cases.FreeNumber _
, "Case_2", I_CN_PERMANENT, I_CAT_STATIC_LINEAR)

Set recs = cas.Records

i = recs.New(I_LRT_LINEAR_3D)

Set rec_1 = recs.Get(i)

rec_1.SetValue I_L3DRV_PX1, 0
rec_1.SetValue I_L3DRV_PY1, 0
rec_1.SetValue I_L3DRV_PZ1, -100
rec_1.SetValue I_L3DRV_MX1, 0
rec_1.SetValue I_L3DRV_MY1, 0
rec_1.SetValue I_L3DRV_MZ1, 0

rec_1.SetValue I_L3DRV_PX2, 0
rec_1.SetValue I_L3DRV_PY2, 0
rec_1.SetValue I_L3DRV_PZ2, 0
rec_1.SetValue I_L3DRV_MX2, 0
rec_1.SetValue I_L3DRV_MY2, 0
rec_1.SetValue I_L3DRV_MZ2, 0

rec_1.SetValue I_L3DRV_LOCAL, 0

rec_1.SetPoint 1, 0.75, 1, 0 ' set coordinates here
rec_1.SetPoint 2, 0.75, 5, 0 ' set coordinates here

Set recs = Nothing
Set rec_1 = Nothing

Set cas = Nothing

Rafal Gaweda

Anonymous · ‎02-27-2012

Ok great, it's working,

Yet, it's the most difficult load to programm : a convoy

convoi

I think I have a lot of input data like :

define the polyline

the name of convoy

the direction of load

the type of load (uniform surface)

the value of load (P)

the loads geometry (x, y, dx, dy)

and the convoy dimensions

Would you mind give me an example like previous macros ?

Rafal.Gaweda · ‎02-28-2012

It is only possible to define Symmetric Vehicel using API.

Are you still interested ?

Some example code how to define vehicle attached

- Define vehicles as many as you want with as many records as you want in the same way as shown in attached xls (one below another)

These texts should be used in column C : Vehicle name, linear load, concentrated force, surface load

Rafal Gaweda

Anonymous · ‎02-28-2012

Yes still interested,

For my example the loads are not symmetric. Maybe we can use a convoy saved in a catalog by myself ? But I don't know how to call the saved convoy in a catalog by API ?

Any solution ?

Rafal.Gaweda · ‎02-28-2012

Creating moving load case with vehicle loaded from database:

Dim Cas As RobotMobileCase
Dim Route As RobotMobileCaseRoute
Dim VData As RobotVehicleData

' route is a polyline - creating polyline here

Dim PlineGeometry As RobotGeoPolyline
Set PlineGeometry = Robapp.CmpntFactory.Create(I_CT_GEO_POLYLINE)

Dim Segment As RobotGeoSegment
Dim Object As RobotObjObject

' create as many segments (= characteristic points of polyline) as you like in the way shown below

Set Segment = Robapp.CmpntFactory.Create(I_CT_GEO_SEGMENT_LINE)
Segment.P1.Set 0, 2, 0

PlineGeometry.Add Segment
PlineGeometry.Initialize

Set Segment = Robapp.CmpntFactory.Create(I_CT_GEO_SEGMENT_LINE)
Segment.P1.Set 10, 2, 0

PlineGeometry.Add Segment
PlineGeometry.Initialize

RouteNumber = 13

' creating object from polyline

Set Object = Robapp.Project.Structure.Objects.Create(RouteNumber)
Object.Main.Geometry = PlineGeometry
Object.Initialize
Object.Update

' creating moving load case

Set Cas = Robapp.Project.Structure.Cases.CreateMobile(Robapp.Project.Structure.Cases.FreeNumber, "Moving Load Case", I_CN_PERMANENT)

' assigning route and route parameters to case
Set Route = Cas.GetRoute

Route.Geometry = RouteNumber

Dim Fac As RobotMobileCaseSegmentFactors
Set Fac = Route.GetFactors(1)
Fac.VL = 1
Fac.VR = 1
Route.SetFactors 1, Fac

Route.LoadDirection.Set 0, 0, -1
Route.Step = 1
Cas.SetRoute Route

' assign vehicle to case

Set VLabel = Robapp.Project.Structure.Labels.Create(I_LT_VEHICLE, "Pojazd S - klasa E") ' select vehicle name
Set VData = VLabel.Data

VData.LoadFromDBase "Pojazd S - klasa E", "PN1030" ' select vehicle name and database name
Robapp.Project.Structure.Labels.Store VLabel

Cas.Vehicle = "Pojazd S - klasa E" ' assign vehicle to case

Rafal Gaweda

Anonymous · ‎02-28-2012

I have created a convoy which name is "TS".

If I understand your macro, I just have to replace "PN1030" by "TS" :

VData.LoadFromDBase "Pojazd S - klasa E", "TS"

I have created a catalog to save my convoy. I don't know how to save it otherwise.

catalog

Will it working with your macro ?

I have an annex question :

I would like to create a convoy's library in order to share it whith my colleagues but I don't know where it is save in the computer and what I have to copy in their computer.

Community

VBA loads - API

VBA loads - API

VBA loads - API