Hi
Is it possible to have a panel cut only show the results for one panel which it cuts through;?
Solved! Go to Solution.
Solved by Krzysztof_Wasik. Go to Solution.
Thanks for the quick reply,
Is it also possible to examine the diagram analysis for only the one panel?
The integral/average values are impacted greatly by the other panels, unfortunately.
My particular case is examining panel cuts through a foundation raft slab underneath a concrete core - panel cut is cutting through the walls as well as the foundation
Thanks
Hi @ByrnePM
Regarding your questions
Is it also possible to examine the diagram analysis for only the one panel?
Yes Diagram analysis is presented for selected panels.
The integral/average values are impacted greatly by the other panels, unfortunately.
Use smoothing within a panel (or no smoothing) to reduce that effect.
Thanks again for your reply,
Just to help explain my query please see below snips
1 - Foundation under core with panel cuts
2 - Diagram analysis view for SC2 - MID NS
You can see in Diagram analysis view that the core walls are being cut by the panel cut and are thus being capture in the overal integral/average results for this cut
Is there a way to just have the cut indicate information for the foundation panel?
Thanks
Try to select required panel (foundation) before Diagram analysis generation.
Can't find what you're looking for? Ask the community or share your knowledge.