Element not assigned to story

[Anonymous]

I have read the posts on this subject and have tried to redefine the stories to assign columns to stories.  I have a 3 story structure that was created in Revit.  After redefining the stories, the upper level columns have been assigned but the lower level have not.  What else can I try?

[Artur.Kosakowski · Accepted solution]

Hi @Anonymous

Try to run model correction to structural axes with e.g. 0.5 m tolerance and then run automatic assignment of elements to stories.

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.

[Anonymous]

Thank you Artur for all your help.  I appreciate it.

Forgive me but I am not familiar with Robot. Would you please guide me through the steps to run the corrections?  I can not seem to find where this is located.

Thank you

[Anonymous]

here you go;

http://help.autodesk.com/view/RSAPRO/2015/ENU/?guid=GUID-F394F219-799B-40D8-B9F8-1D91EF0B8043

under geometry drop down

[Artur.Kosakowski]

Hi @Anonymous

Have you managed to correct your model with the option @Anonymous (thank you) pointed you at? 

[Anonymous]

no it did not seem to work

[Anonymous]

Thank you for you response. I followed the correction procedure and it did
not change the message. The calculation will not run. It seems all the
columns and walls are not assigned to a story. I have attached the file.

[image: Inline image 1]

[Artur.Kosakowski]

Hi @Anonymous

Could you attach your model so that we could try to help?

[Anonymous]

The file is attached. Thanks

[Artur.Kosakowski]

Hi @Anonymous

It seems like you missed it.

[Anonymous]

I apologize, the file should be attached now.

Thank you for your help

[Artur.Kosakowski]

Hi @Anonymous

Try to define smaller vertical panels among the levels of the stories instead of a single ones through the entire structure height. 

If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.