hi
what is the deference btween these two disgard density in robot
how should i use them if i include building mass in conversion would i have to check both or what is the right process
Accepted solution
If you have a load case with only SW you may let this box unchecked then Robot will automatically convert SW to mass.
If you have SW mixed with other dead loads then you must tick the box and convert to mass these dead loads by yourself
M. Agayr
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
how should i use them if i include building mass in conversion would i have to check both or what is the right process
The 2 pictures are completly independant.
The 1st one is about an equivalente force method which doesn't need to run a modal calculation first, so Robot ask you if you want or not to disregard the density.
The 2nd one is about a modal calculation which is followed by a seismic calculation.
M. Agayr
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Sorry, previous versions are no longer installed here.
Could you make a screenshot showing this particularity
M. Agayr
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I have no explanation
M. Agayr
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
Not automaticly
You must convert load cases acting in seismic case by your self. Except Selfweight if you let "Disregard density" box unchecked.
M. Agayr
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
