Weekly New Knowledge Articles by Support team | Nov 9th - 15th, 2022

[lim.wendy]

Knowledge articles written by our Revit support team to resolve the problem on your own. There're couple of incidents reported, do take a look at them for possible workarounds.

Published Date	Summary	Knowledge Article	Incident Logged
15-Nov-22	When opening a Revit model the error "Elements need to be disconnected" is seen.	"Elements need to be disconnected" when opening a Revit model	No
15-Nov-22	Filled Region from linked RVT file covers the 3D elements from the host model in plan view in Revit. How to move the filled region to the back?	Filled Region from linked RVT file covers the 3D elements from host model in plan view in Revit	Yes
15-Nov-22	How to print a part of view from a Revit to work on a paper drawing?	How to print a part of view from a Revit?	No
15-Nov-22	Is it possible to set different view ranges in one floorplan in Revit?	How to set different view ranges in one floor plan in Revit	No
14-Nov-22	'Analytical panel in not planar' error appears although association is removed in Revit.	Analytical panel in not planar error appears although association is removed in Revit	Yes
14-Nov-22	How to get access to the Revit LIVE Editor for Revit?	How to get access to the Revit LIVE Editor for Revit	No
14-Nov-22	Unable to connect Fabrication pattern 760 as end element to straight in Revit	Unable to connect Fabrication pattern 760 as end element to straights in Revit	No
10-Nov-22	The Stick Symbol in a Coarse view of a Column in Revit is not following the Column geometry when its' work plane is changed.	Coarse symbolic representation of a Column does not follow the actual column Work Plane in Revit	Yes