unknown shape

[nader.shaaban]

dears

when i model a cold formed steel shapes [z sections] from uk english library and trying to apply the connections. i received a message from revit that [ unknown shape of connected elements ]

i changed the profile shape or defined the shape to cold formed z section with lip and trying to apply

the connection and i received the following message

"Incomplete Structural Section parameters"

while all parameters are complete as shown in the attachments.

best regards

can i found a solution

thanks

nader

[robertwmerriman1]

Hi @nader.shaaban 

The familes need to be defined as per the links below to work with structural connections

https://help.autodesk.com/view/RVT/2023/ENU/?guid=GUID-6244E741-5D14-4DAD-AE25-5069F71B69F3

https://help.autodesk.com/view/RVT/2023/ENU/?guid=GUID-31C1849F-0BF4-4F9D-9F76-007F9831AB6F

[nader.shaaban]

dear sir thanks a lot for your reply

i changed the profile shape or defined the shape to cold formed z section with lip and trying to apply

the connection and i received the following message

"Incomplete Structural Section parameters"

while all parameters are complete as shown in the attachments.

best regards