Re: Steel plate rounded corner export

GatisM · ‎09-15-2023

Hello!

Tried all checkboxes. How to export steel plate shape, or how to model it correctly to be able export to ifc rounded corners?

jay_colcombe · ‎09-15-2023

Hi,

I assume you tried most settings so i Duplicated and Edited the Existing IFC4 Reference View (Structural) Export Setup in Revit 2023 and set the Level of Detail to High - (I don't have time to test low but though you would have used this by default anyway)

Opening the IFC back in Revit included the Filet (I created using the Steel Tab > Notch Tool)

This was also the case for Navisworks too.

Jay Colcombe

Autodesk Certified Instructor
Revit Architecture & Structure Certified Professional
AutoCAD Certified Professional
B.Sc. Hons Civil & Structural Engineering

If you find my post interesting, feel free to give a Kudo.
If it solves your problem, please click Accept to enhance the Forum.

GatisM · ‎10-10-2023

Thanks for your replay!

Did further tests using ifc4 too. Noticed that there is no problems export rounded shapes for beams also in ifc2x3. The problem as I noticed is not with "rounded geometry", problem is with steel tab corner cut function "convex" for inner corners. See picture. I supposed to say it's Revit bug. Hope will be fixed. Ifc format must be 1:1 with rvt.

Steel plate rounded corner export

Steel plate rounded corner export

Forums Links

Post to forums