Scaffolding families - best method to use?

[Anonymous]

Hi Everyone, 

We're currently using AutoCAD to model and document large scaffolding systems - we have dynamic blocks of all the different system components which contain node snapping points. This method is extremely easy to model large systems quickly, we basically turn off all snaps except for node, and then copy/array everything we need into position. The downfall is that when it comes to documentation, we're finding AutoCAD is too cumbersome and does not give the flexibility we need to create our drawings as quickly as is possible in Revit. (think section boxes, scope boxes, sections, callouts, etc. etc.) 

So my question is, to emulate the behavior of our dynamic blocks in Revit, should we be looking at adaptive components with embedded point elements, so that we can snap everything together quickly in the project environment, or would the better workflow be to use column and beam families? 

Here's a screenshot of our AutoCAD blocks, I've pulled them apart - you can just see the node next to the bottom right member.

Thanks in advance for any thoughts.

[titomoura]

Hi,

I need your e-mail address to share it.

[lhee_kenny]

Hi, Please send me a PM. 

@lhee_kenny - this post is being edited to remove PII.

[jamesTW25]

Hi,
Please send me a PM.

Many thanks

@jamesTW25 - this post is being edited to remove PII.

[jay_colc]

Hi 

Please send me a PM.

Thanks in advance

@jay_colc - this post is being edited to remove PII.

[Jeongseongwook]

Hi,

Please send me a PM. 

@Jeongseongwook - this post is being edited to remove PII.

[zheming_yap]

hi will appreciate if you could share it with me too
Please send me a PM.

@zheming_yap - this post is being edited to remove PII.

[mohamedjala_merroun]

Hi Titomoura, 

I would like to receive the scaffolding family , if that possible , and thank you a lot 🙂 , please send me a PM.

@mohamedjala_merroun - this post is being edited to remove PII.

[will_harmsworth]

Hi Titomoura,

I'd appreciate the link too if that is not problem? 
Please send me a PM.

Thanks in advance!!

@will_harmsworth - this post is being edited to remove PII.

[hcar0025]

Hi @titomoura 

Could I also please ask for your scaffolding system. Please send me a PM. Thanks so much for your time in modelling it, much appreciated! 🙂 

@hcar0025 - this post is being edited to remove the PII.

[petrusevskigoran]

Hello Tito,

Can you also send me the families?
Please send me a PM.

Thanks in advance.

BR,

Goran

@petrusevskigoran - this post is being edited to remove PII.

[quietworldstory]

hi very much appreciate if you could share the family.
Please send me a PM.

@quietworldstory - This post is being edited to remove PII.

[nadya_putri3A4RG]

Hi Titomoura, i just saw your scaffolding drawing. Very impressive you can draw like that.

Can you please share it with me?

Please send me a PM.

would really appreciate it.

Thank you.

@nadya_putri3A4RG - this post is being edited to remove PII.

[nigel.robertson]

Hi Titomoura, I too love your work, and would kindly request a download link if possible for your scaffolding families - i will be using them only for my private house project - not commercially. many thanks !

[shay5]

Hi, I would also like to share please

@shay5 - this post is being edited to remove PII.

[robZKPZ4]

I am just now learning Revit, I’d love the download link as well 

[valery_ordonez]

Hi Tito! 

I was looking for scaffolding families and came across your design. It looks very impressive and highly detailed.
I am currently working on a project and I need those families. Would you be willing to share them with me? It would be extremely helpful.
Please let me know what you think.

[valery_ordonez]

Hi Tito! 

I was looking for scaffolding families and came across your design. It looks very impressive and highly detailed.
I am currently working on a project and I need those families. Would you be willing to share them with me? It would be extremely helpful.
Please let me know what you think

[miguelneshano]

Can u share the family revit file

[tj_ladd40]

Could you send me these families?